Hikvision DS-PTA-WL-433 Manual

Hikvision Detektor DS-PTA-WL-433

Læs nedenfor 📖 manual på dansk for Hikvision DS-PTA-WL-433 (3 sider) i kategorien Detektor. Denne guide var nyttig for 22 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/3

Power on the security control panel. Press the funcon buon once and

then present the tag or trigger tampering alarm. Add the tag reader

according to the voice prompt. The green LED of the reader will ﬂash 8

mes aer being successfully enrolled.

Note: The distance between the security control panel and the reader should be

less than 50 cm.

Enroll the Tag Reader Locally

1. Check Signal Strength

Press the funcon buon twice on the control panel and then present

the tag or trigger tampering alarm to enter the check signal strength

mode.

Strong Signal: Solid green for 3s (interval: 15s)

Weak Signal: Solid red for 3s (interval: 15s)

1. Log in to the and input “Hik-Connect” to search the mobile APP Store

client.

5. Log in the Hik-Connect and tap the icon “+” at the upper-right coner of

the Hik-Connect page to add the security control panel. You can scan the

QR code on the device rear panel or on the package box, or input the

device serial No. manually to add the device when the device is in the

registraon mode.

6. Aer adding the security control panel, tap the arming status icon on

the right of the security control panel’s name to enter the Paron page.

2. Download and install Hik-Connect to your phone.

3. Aer installing, tap to run the client.

4. Power on the security control panel.

7. Tap the “+” icon on the Paron page to add the peripherals.

Any and all informaon, including, among others, wordings, pictures,

graphs are the properes of Hangzhou Hikvision Digital Technology Co.,

Ltd. or its subsidiaries (hereinaer referred to be “Hikvision”). This user

manual (hereinaer referred to be “the Manual”) cannot be reproduced,

changed, translated, or distributed, parally or wholly, by any means,

without the prior wrien permission of Hikvision. Unless otherwise

spulated, Hikvision does not make any warranes, guarantees or

representaons, express or implied, regarding to the Manual.

About this Manual

This Manual is applicable to Wireless Tag Reader.

The Manual includes instrucons for using and managing the product.

Pictures, charts, images and all other informaon hereinaer are for

descripon and explanaon only. The informaon contained in the Manual

is subject to change, without noce, due to ﬁrmware updates or other

reasons. Please ﬁnd the latest version in the company website

(hp://overseas.hikvision.com/en/).

Please use this user manual under the guidance of professionals.

Trademarks Acknowledgement and other Hikvision’s

trademarks and logos are the properes of Hikvision in various jurisdicons.

Other trademarks and logos menoned below are the properes of their

respecve owners.

Legal Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT

DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED

“AS IS”, WITH ALL FAULTS AND ERRORS, AND HIKVISION MAKES NO

WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,

MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR

PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL

HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO

YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT

DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS

PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR

DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN

IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF

PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT

TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE

OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK,

VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER,

HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT

LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO

ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW. HIKVISION

SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH

ILLEGITIMATE PURPOSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE

APPLICABLE LAW, THE LATER PREVAILS.

Indicator

Operaon:

Armed: Green LED ﬂashes once.

Disarmed: Red LED ﬂashes once.

Formaed: Red LED ﬂashes 3 mes.

Enrolled: Green LED ﬂashes 8 mes.

Operaon Failed: Orange LED ﬂahes once.

Low Baery: Green LED ﬂashes 5 mes.

Display Signal Strength:

Under the signal strength checking mode:

Strong Signal: Solid green for 3s (interval: 15s), unl the control panel

exits the signal strength checking mode.

Weak Signal: Solid red for 3s (interval: 15s), unl the control panel exits

the signal strength checking mode.

No signal: No light.

Formang

Remove the baery. Hold the TAMPER buon and power the reader on at

the same me. Aer 5s, the red LED ﬂashes 3 me, which means the

formang is completed.

Installaon

Operaon

2.Loosen the set screw at the boom of the reader and remove the

mounng bracket.

3. Fix the mounng bracket on the wall with three supplied screws.

4. Hang the tag reader onto the mounng bracket and ghten the set

screw.

English

Diagram Reference

Product Information

Specification

TAMPER Buon

Tampering Alarm: If the tag reader is disassembled, an alarm will

be triggered.

Appearance

Power On

Enrollment

Wireless Tag Reader

CONTROL

PANEL

1. Loosen the four screws on the rear panel.

2. Remove the rear panel.

3. Install four AAA baeries according to the polarity mark.

Note: 1. Do not reverse the polarity of the baery. 2. Indicators light aer powering

on. Low power: Green LED ﬂashes 5 mes. Normal power: Solid green for 5s.

3. Alkaline baeries are recommended.

Indicator 3Mounng Bracket 5Rear Panel

2Front Panel 4TAMPER Sheet 6TAMPER Buon

(Remove Mounng Bracket)

Beep

Once

Beep

Once

Armed

Disarmed

Beep

Once

Failed

Present

Beep

Tag Sensed

Present Remove

Beep

Tag Sensed

Hold 3s,

remove aer a beep

1Away Arming 2Stay Arming

2006/66/EC (baery direcve): This product contains a baery

that cannot be disposed of as unsorted municipal waste in the

European Union. See the product documentaon for speciﬁc

baery informaon. The baery is marked with this symbol,

which may include leering to indicate cadmium (Cd), lead (Pb),

or mercury (Hg). For proper recycling, return the baery to your

supplier or to a designated collecon point. For more informaon

see:www.recyclethis.info

This product and - if applicable - the supplied accessories too are

marked with "CE" and comply therefore with the applicable

harmonized European standards listed under the RE Direcve

2014/53/EU, the EMC Direcve 2014/30/EU, the LVD Direcve

2014/35/EU, the RoHS Direcve 2011/65/EU.

2012/19/EU (WEEE direcve): Products marked with this symbol

cannot be disposed of as unsorted municipal waste in the

European Union. For proper recycling, return this product to your

local supplier upon the purchase of equivalent new equipment, or

dispose of it at designated collecon points. For more informaon

see: www.recyclethis.info

FCC Informaon

Please take aenon that changes or modiﬁcaon not expressly approved

by the party responsible for compliance could void the user’s authority to

operate the equipment.

FCC compliance: This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protecon against harmful

interference in a residenal installaon. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in

accordance with the instrucons, may cause harmful interference to radio

communicaons. However, there is no guarantee that interference will not

occur in a parcular installaon. If this equipment does cause harmful

interference to radio or television recepon, which can be determined by

turning the equipment oﬀ and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separaon between the equipment and receiver.

—Connect the equipment into an outlet on a circuit diﬀerent from that to

which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

This equipment should be installed and operated with a minimum distance

20cm between the radiator and your body.

FCC Condions

This device complies with part 15 of the FCC Rules. Operaon is subject to

the following two condions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference

that may cause undesired operaon.

90.8mm 15.5mm

90.8mm

3 4

3 s

screw

Present

Beep

Tag Sensed

Arming

Remove

Beep

Once

Locked

Note: Operang

illegal tag

(unregistered

tag) more than 3

mes, the device

will be locked for

90s.

3Disarming

M do el

R spee 10.0k ps 4. kF d b / 8 bps

R metho wo wa y communica onF d T 

R encryp on A S 12F  E - 8

R frequency 4 6 F 33/8 8 MHz

R muF dula on 2 GFK

R istance 00 m F d 8 (open area)

R power 10 mF dB

TAMPER switch 1

I dn icator

3 d, colors: re green an oranged

B zzu er

Prompt for opera on an tampering alarmtag  d

Power C power input3V D

B a ery type 4 AAA a eriesb 

B  d-ba ery life span 5 years in stan y status

Opera on humi ity 10% to 0% no con ensing d 9 ( d )

Opera on temperature 20°C to 60°C 4° to 140° - + (- F + F)

Dimension

( H D)W × ×

9 8 9 80.7 mm × 0.7 mm × 15.5 mm .57 × .57(3 " 3 "

× 0.61")

Colo r lack an whiteB d

Protec on le el P65 v I

I  nstalla on Wall moun ng

Wireless

mo uled

Interface &

component

Electrical

& a eryb 

Others

Wireless ag Rea erT d

Enter control panel address in web page to enter the web client. Click

“User Management - Card - Add” and swipe the tag on the device. Aer a

beep, the tag informaon will appear in the list.

Note: Installaon: open area, far away from metal. Wall: soomth surface, 4 mes

the weight of the device. Screws: use screws in the accessory bag.

2- 5.8

3- 3.33

83.5mm

34.0mm

Buzzer

Tampering Alarm: 5 beeps.

Références du schéma

Français

Referências do diagrama

Português

EN50131-1:2006+A2:2017

EN50131-3:2009

EN50131-5-3:2017

Security Grade 2

Environmental Class II

Produkt Specifikationer

Mærke:	Hikvision
Kategori:	Detektor
Model:	DS-PTA-WL-433

Har du brug for hjælp?

Hvis du har brug for hjælp til Hikvision DS-PTA-WL-433 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Detektor Hikvision Manualer

Hikvision DS-PI-T250 Manual

8 December 2024

Hikvision DS-PI-D40 Manual

8 December 2024

Hikvision DS-2FM2466 Manual

30 August 2024

Hikvision IDS-TP40-04L Manual

31 Juli 2024

Hikvision DS-PT1-WE Manual

29 Juli 2024

Hikvision DS-PDBG8-EG2-WB Manual

20 Juli 2024

Hikvision DS-TPS100 Manual

26 Februar 2024

Hikvision DS-PS1-I-WE Manual

18 December 2022

Hikvision DS-PTA-WL-433 Manual

26 November 2022

Detektor Manualer

Nyeste Detektor Manualer

Steinberg SBS-MD-9 Manual

16 December 2024

Steinberg SBS-MD-7 Manual

16 December 2024

Steinberg SBS-MD-2 Manual

16 December 2024

Steinberg SBS-MD-5 Manual

16 December 2024

AstralPool RolaChem RP9 Manual

15 December 2024

Steinberg SBS-MD-3 Manual

15 December 2024

Steinberg SBS-MD-13 Manual

15 December 2024

Steinberg SBS-MD-6 Manual

15 December 2024

Perel EFL27 Manual

14 December 2024

IFM OW1010 Manual

5 December 2024