Hitachi CMP307XU Manual
Læs nedenfor 📖 manual på dansk for Hitachi CMP307XU (30 sider) i kategorien Skærm. Denne guide var nyttig for 37 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/30
ENGLISH
FEATURES
Notes about This Manual
•The information in this manual is subject to change without notice.
• While meticulous care has been taken in the preparation of this manual, you are
requested to notify your dealer or us should you have any comments, views or
questions about our product.
• Fully understand the prerequisites to using the product, such as hardware and
software specifications and constraints, in using the product. We are not held liable
for damages caused by improper handling of the product.
• Reproduction of this manual in whole or in part without our prior written permission
is prohibited.
• The product names mentioned in this manual may be trademarks or registered
trademarks of their respective owners.
The following features are provided by the color Plasma Display Monitor.
Large-screen, high-definition plasma display panel
The 37-inch color plasma display panel, with a resolution of 1024 (H) x 768(V) pixels,
creates a high-definition, large-screen (aspect ratio : 4:3) and low-profile flat display.
Free from electromagnetic interferences from geomagnetic sources and ambient power
lines, the panel produces high-quality display images free from color misconvergence and
display distortion.
Multimedia input support
The monitor comes complete with a mini-D-sub terminal and a BNC terminal for RGB
input and with a composite/S terminal and a component terminal for video input, and
even with stereo audio input terminals. It allows hooking up with a number of devices,
from PCs to video gear.
Multiscan converter and progressive LSI
The multiscan converter provides a broad multiscan range of signals (*1), from video
signals (15 kHz) to PC analog video signals. Video input is subjected to progressive
processing by a dedicated LSI to offer better video quality.
(*1) Video performance of input signals in excess of 1024 x 768 (fields) is not
guaranteed, as they appear in a simplified display mode.
Easy-to-use remote controller and EasyMenu
The remote controller included eases the work of setting display controls. Further, the
on-screen display system, EasyMenu, displays the status of signal reception and display
control settings in an easy-to-view fashion.
Power saving system
International energy star and a power saving system are provided. The power-saving
system operates automatically to reduce power consumption even when there is no video
input signal.
1
FEATURES 1
CONTENTS 2
SAFETY GUIDELINES 3
INSTALLATION INSTRUCTIONS 7
Standard accessories 7
Installation 7
Anti-tumble measures 7
Component Names 8
Installation and Cabling 10
Handling the Remote Controller 12
OPERATING INSTRUCTIONS 13
Turning Power On and Off 13
Input Selection 14
Volume Adjustment 14
Contrast Adjustment 15
Sound Mute 15
Input Signal Status Display 15
On-Screen Display System, EasyMenu 16
OTHER FEATURES 22
Automatic Store 22
Reset (Settings Initialization) 23
Signal Check 23
Switching the Display Method 24
Power Save Mode 25
Sound Mode 25
TROUBLESHOOTING 26
Symptoms That Seemingly Appear to be Failures
26
Actions to Correct Abnormal Displays 27
PRODUCT SPECIFICATIONS 28
General Specifications 28
Signal Input 29
Factory Settings 30
ENGLISH
CONTENTS
2
ENGLISH
SAFETY GUIDELINES
This monitor is designed to be safe to use. However, due to high voltage of about 400 V,
fire or serious injury may occur unless you use this monitor in correct way.
You are strongly suggested to follow the instruction shown below in order to avoid such
injury.
Keep the safety guideline
Do not use the monitor if it fails
If you find something unusual ,
♦If smoke comes out,
♦If there is a strange smell,
♦If water enters the case,
♦If you drop the monitor or
damage the cabinet,
(1) Turn off the monitor
(2) Disconnect the power plug
from the power point
(3) Request for repair
Warning and Caution are indicated in this guide and monitor itself.
Fire or electric shock may cause death or serious injury unless you
follow the instruction.
Warning
Electric shock or other accidents may cause serious injury or damage
of your properties.
Caution
3
ENGLISH
Fire or electric shock may cause death or serious injury unless you
follow the instruction.
Warning
● If something smells strange or smoke comes from the monitor:
Turn off the monitor and disconnect the power plug from the power point immediately.
Contact service center after confirming that the smoking has stopped.
If you continue to operate the monitor with such abnormal condition, it may cause fire or you may
receive an electric shock.
● Do not drop water or a foreign substance on to the monitor.
If you drop water or a foreign substance on to the monitor, it may cause fire or an electric shock.
If it happens turn off the monitor and disconnect the power plug from the power point and ask service
center for instruction.
● Do not put the monitor on an unstable place.
If you put the monitor on an uneven or unstable place, it may fall down and you may be injured.
Put the monitor on a flat surface strong enough to take the weight.
● Do not apply shock to the monitor.
If no picture, glass broken, smoke or something is smelling after applying shock to the monitor, turn off the
monitor and disconnect the power plug from the power point immediately. Then, call the service center.
If you continue to operate the monitor with such abnormal conditions, it may cause fire or you may
receive an electric shock.
● Do not disassemble or modify the monitor.
There is high voltage portion inside of the monitor. Disassembling or modification of the monitor may
cause fire or electric shock.
● Do not use the monitor in wet environment.
If you use the monitor in a wet place such as bath or shower room, it may cause fire or electric shock.
Using the monitor beside a window when snowing or raining or by a seaside are not recommended.
● Do not damage or modify the power cord.
If you put something heavy on the power cord or pull, squeeze, heat the cord, it may be damaged and
it may cause fire or electric shock. If the power cord is damaged, call service center.
Fire or electric shock may cause death or serious injury unless you
follow the instruction below.
Warning
SAFETY GUIDELINES(continued)
4
● The enclosed power cord must be used!
Failure to do so may cause electric shock hazard or fire hazard.
In USA/Canada, use a UL LISTED/CSA LABELLED or CERTIFIED power cord set meeting the
following specifications :
Rating: min. 125V, 10A , Length: max. 3.0m , Type: SVT or SJT
Plug type: NEMA 5-15P figure, Parallel blade, Grounding type
● Use only the correct voltage power outlet with safety ground connection!
100 - 120 V for USA, Canada, etc. 200 - 240 V for Europe, etc.
(This monitor will automatically adjust to the input voltage 100 - 120 / 200 - 240V.)
● Be careful of power cord connection!
Before inserting the plug of the power cord into a socket of the correct voltage, check that the
connection portion of the power cord is clean (with no dust). Then, insert the plug of power cord into
the socket firmly, otherwise it may cause electric shock or fire hazard.
● Do not touch the power plug when lightning is close to you.
You may receive an electric shock.
● Do not touch the power plug with wet hands.
You may receive an electric shock.
● Do not obstruct a ventilation hole.
If you obstruct a ventilation hole during the operation of the monitor or just after switching off the
power, it may cause a fire or electric shock due to heating up the monitor.
• Do not put the monitor screen side up.
• Do not put the monitor on a shelf or in a cabinet.
• Do not put the monitor on a carpet or mattress.
• Do not cover the monitor with a cloth.
ENGLISH
Electric shock or other accidents may cause serious injury or damage to
your property.
Caution
● You must to check the user manual of the computer when you connect to
the monitor.
The weight of the monitor or obstructing the ventilation hole of the computer equipment may cause
distortion or damage of the computer equipment.
● Disconnect the power plug from the power point when you carry the monitor.
Carrying the monitor without disconnecting the power plug from the power point may damage the
cord and cause a fire or electric shock. You are advised to carry the monitor with two persons.
Handle with care when you carry the monitor, particularly take care of glass screen.
● When you disconnect the power plug.
You have to grasp the power plug itself, do not pull the power cord.
If you pull the power cord, you may damage it and it may cause a fire or electric shock.
Do not touch the power plug just after disconnecting it from the power point or you may receive an
electric shock.
● Disconnect the power plug from the power point when you don't use the monitor
for a long time.
This is just for your safety.
● Do not put the monitor in atmosphere with soot, steam, high humidity, and dust.
It may cause a fire or electric shock.
● Do not put the monitor in high temperature atmosphere.
Do not put the monitor in the place exposed to the direct rays of the sun or inside car under the burning
sun for a long period of time. Heat may cause a fire, transformation, or melting of the monitor.
● Do not put things on the monitor.
Do not put things on the monitor or give some shock to the monitor.
The monitor may fall down or drop from a desk. And it may cause injury.
5
You may have serious injury or your property may be damaged unless
you follow the instruction below.
Caution
● Do not bundle the power cord.
It will be heated up or it may cause a fire.
■ Caution for 200 - 240V operation only
This equipment relies on the protective devices in the building installation for short - circuit and over -
current protection. Refer to the following table for the suitable number and location of the protective
devices which should be provided in the building installation.
INFORMATIVE EXAMPLES OF PROTECTIVE DEVICES IN SINGLE - PHASE
EQUIPMENT OR SUB - ASSEMBLIES
Verify that the protective devices in the building installation meets the conditions in the table prior to installing the equipment.
■ Remove the power cord for complete isolation!
For complete isolation from the power source, remove the power cord from the monitor or from the
wall socket.
Protection
against
Minimum number
of fuses or circuit -
breaker poles
Location
Case A: Equipment to be connected to POWER SYSTEMS
with earthed neutral reliably identified, except for
Case C below.
Earth faults Phase conductor1
Overcurrent Either of the two conductors1
Case B: Equipment to be connected to any supply, including IT
POWER SYSTEMS and supplies with reversible plugs,
except for Case C below.
Earth faults Both conductors2
Overcurrent Either of the two conductors1
Case C: Equipment to be connected to 3 - wire power
systems with earthed neutral reliably identified.
Earth faults Each phase conductor2
Overcurrent Each phase conductor2
6
ENGLISH
Precautions
SAFETY GUIDELINES(continued)
● Installation environment
Do not obstruct a ventilation hole.
Do not put the monitor on carpet or blanket, or near a curtain which has a possibility of obstructing a ventilation hole of the monitor.
Do not put the monitor in the following places.
◆ Hot places such as near heater, place exposed to the direct rays of the sun.
◆ A place where the temperature is widely changing.
◆ Places with soot, dust or high humidity.
◆ Poor air ventilation place.
◆ Place near fire.
◆ A wet place such as bathroom, or shower room.
◆ Place where you can trip over it.
◆ Always vibrating or strongly vibrating places.
◆ Distorted or unstable places.
● How to view the monitor.
If you use the monitor in too dark a room, your eyes may become tired. Please use it in a reasonably bright room.
Avoid direct rays of the sun or room falling on to the screen in order to prevent eye fatigue.
To use the monitor for a long time may cause damage to your eyes such as “Dry eye” or “Short-sightedness”
Please take a rest of 10-15 min. for every one hour viwed. Please watch the monitor in downward direction.
● How to clean the monitor.
Before cleaning the monitor, turn off the monitor and disconnect the power plug from the power point.
When cleaning the monitor, do not spray directly the screen or cabinet with cleaner.
Use a clean, dust free, dry and soft cloth. If it is not enough, then use a cloth with non-alcoholic or non-ammoniac detergent.
Do not rub the surface of the screen with ball-point-pen or screw-driver etc.
● Prevention of an obstacle to TV/Radio receivers
This monitor has been designed pursuant to the FCC Rules and so on in order to prevent a problem to TV/Radio receivers.
However, this monitor may cause a problem to TV/Radio receivers if you put this monitor close to them.
● Precautions for the monitor
-
Use the attached signal-cable when you connect the monitor with PC equipment. Do not use other signal-cables.
- Confirm the connector is fixed tightly when the signal cable is connected.
Also confirm the screws on the connector are tightened.
-
Plug the power cord of the monitor into a different socket from that for other equipment, such as TV, Radio etc..
- Use a plug with ground terminal and make sure that it connects to the ground.
● Precautions for TV & Radio
- Keep the monitor away from TV or Radio.
- Adjust TV or radio antennas in order for the monitor not to receive interference.
- The antenna cable of TV or Radio should be kept away from the monitor.
- Use a coaxial cable for antenna.
You can check if this monitor influences TV/Radio receivers by turning off all other equipment other than the monitor.
If you can find a problem receiving TV/Radio when using the monitor, check the instructions mentioned above.
● Precaution during transportation
Please pay attention when you transport this monitor because it is heavy.
Furthermore, use the specific carton box and its packaging materials when the monitor is transported.
■ FCC (Federal Communications Commission) Statement Warning
WARNING:
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own expense.
INSTRUCTIONS TO USERS: This equipment complies with the requirements of FCC (Federal
Communication Commission) equipment's provided that follwing conditions are met.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
(1) Power cord : The grounded power supply cord must be used.
(2) Signal cable : The provided signal cable must be used.
7
ENGLISH
● To preserve the performance of this product and to maintain safety, always use one of the special mount
units for installation.
Special mount units (options): Wall Mount Unit (CMPAK04), Ceiling Mount Unit (CMPAT04)
■ Use one of the special mount units to install this product. A mount of insufficient strength or
inadequate design can cause overturning or dropping and result in fire, electrical shock or injury.
Please note that this company assumes absolutely no responsibility for personal injuries or
property damage caused by use of other mount units or improper installation.
■ Installation of the wall mount unit and ceiling mount unit can be dangerous, so do not attempt
this work yourself. Ask your dealer to provide the name of a qualified installer.
■ In order to prevent an internal temperature increase, maintain a space of 10cm or more between
the sides and other objects such as walls, etc., so that the ventilation holes are not blocked.*
INSTALLATION INSTRUCTIONS
1) Using M4 screws (two), fasten the hooks included to the screw
holes at both ends of the top of the rear of the set as shown.
2) Using a commercially available cord, chain and clamp, secure the
set to a firm wall or post.
● This product is complete with the display monitor, plus the accessories shown below.
If any of these accessories is missing, please contact your dealer.
Read the instruction manual (this book) and the warranty card carefully and keep them in a safe place for handy reference.
Retain the packing materials for use in future shipping or relocation.
Instruction manual
(this book) Power cable Signal cable, mini-
D-sub 15-pin
Remote-control
transmitter
Size AA
batteries x 2
Securing to a wall or post
Securing desktop
1) Using wood screws (two), fasten the set to the clamping screw
holes on the rear of the stand as shown.
2) Using commercially available wood screws, secure the set firmly
in position.
M4 screw x 2
Hook x 2
Screw
Hook
Cord or Chain
Cord
or
chain
Clamp
10cm or more*
Two places
Wood screw
■ Have this unit mounted in a stable place. Take measures to prevent it from tumbling down to
avoid possible physical injury.
REA D TH E INSTR UC TION S INSIDE CA R EFULL Y.
KEEP THIS U SER MA NU AL FOR FU TU RE R EFEREN C E.
SERIAL NO.
E SNERGY TAR ®
E
NERGYSTAR ®
E
NERGYSTAR ®ENERGY
STAR®
EasyMenu!
USER MANUAL
MANUEL UTILISATEUR
Color Plasma Display Monitor
CMP307EU
Standard accessories
Installation
Anti-tumble measures
8
ENGLISH
INSTALLATION INSTRUCTIONS (continued)
Remote-control
sensor
STANDBY(RED)
ON (GRN)
Front
Cabinet
(front frame)
Stand
12
Panel
Indicating
lamp
13
Control panel
RGB/VIDEO
[VOLUME]
SELECTMENU
VOLUME button 14
MENU button 16
RGB/VIDEO button
14
SELECT button 16
■ The Adjustment
button is located
on the bottom.
Subpower
button
13
Component Names
9
ENGLISH
Remote controller
POWER RECALL
RGB/
VIDEO
MUTE
VOLUME
MENU
SELECT
RGB/VIDEO button
14
POWER button 13
RECALL button 15
MUTE button 15
MENU button 16
VOLUME button
14
SELECT button
15
External device connection terminals
Rear
RGB input terminals 10
S-VIDEO
VIDEO1 INPUT
VIDEO
VIDEO2 INPUT [COMPONENT]
P
R
/C
R
P
B
/C
B
Y R L
(MONO)
AUDIO
R L
(MONO)
AUDIO
RGB INPUT
RS232C IN
R L
(MONO)
V H B G R
AUDIO
[ D-SUB ]
[ BNC ]RGB2 RGB1
Main power switch
Power cable
connector 10
13
VIDEO input terminals 11
10
ENGLISH
INSTALLATION INSTRUCTIONS (continued)
Connecting to the PC
Read Usage Notes ( to ) carefully to ensure maximum safety before proceeding to
these steps:
(1) Make sure that the display signals produced by your PC meet the specifications of this
product.
For the specifications of this product, see Product Specifications ( to ).
(2) Choose an appropriate site and install the product on a level table where the stand is secure.
Install the monitor to have ready access to a power socket.
(3) Make sure that the monitor’s power switch is off.
The monitor is shipped with the power switch off.
(4) Make sure that your PC’s power switch is off.
(5) Interconnect the signal input terminal (RGB1) on the monitor rear panel and the display
signal output terminal of the PC to each other using the signal cable included.
Optional cables are needed to connect to the RGB2 input and audio input terminals.
If the signal cable included does not match your PC, consult your dealer after reading the section
“Signal Input”.
(6) Insert one end of the power cable included into the rear-panel power cable connector and
the other end into a power socket.
If a power adapter is used, ground the grounding wire to avoid electrical shocks and radio
interference. (Complete grounding before connecting the power plug to a power supply. Before
disconnecting the grounding wire, be sure to disconnect the power plug from the power supply
first.)
(7) Turn on the monitor, then the PC to make sure that a display image appears on the monitor
screen.
For instructions on turning on the monitor and adjusting its display images, see “Operating
Instructions” ( to ).
28 30
13 21
Monitor rear panel
Power cable
Power cable
connector
PC
To signal input
terminals
To audio input
terminals
To signal input
terminals
To audio output
terminal
To signal output
terminal
To signal output
terminal
RGB INPUT
R L
(MONO)
V H B G R
AUDIO
[ D-SUB ]
[ BNC ]RGB2 RGB1
Installation and Cabling
3 6
Produkt Specifikationer
| Mærke: | Hitachi |
| Kategori: | Skærm |
| Model: | CMP307XU |
Har du brug for hjælp?
Hvis du har brug for hjælp til Hitachi CMP307XU stil et spørgsmål nedenfor, og andre brugere vil svare dig
Skærm Hitachi Manualer
19 Maj 2024
1 Marts 2024
5 Januar 2024
9 November 2023
14 Oktober 2023
7 Maj 2023
21 Januar 2023
7 Januar 2023
4 December 2022
11 November 2022
Skærm Manualer
- Skærm Bosch
- Skærm Acer
- Skærm Denver
- Skærm Sony
- Skærm Canon
- Skærm Samsung
- Skærm Panasonic
- Skærm Philips
- Skærm Vitek
- Skærm IFM
- Skærm LG
- Skærm Mitsubishi
- Skærm Apple
- Skærm Sharp
- Skærm Behringer
- Skærm Emos
- Skærm Kenwood
- Skærm Epson
- Skærm Neumann
- Skærm Daewoo
- Skærm Smart
- Skærm HP
- Skærm Waeco
- Skærm AOC
- Skærm Garmin
- Skærm Sanyo
- Skærm Asus
- Skærm Gigabyte
- Skærm Toshiba
- Skærm Pyle
- Skærm InFocus
- Skærm Lenovo
- Skærm Asrock
- Skærm Olympus
- Skærm Abus
- Skærm Optoma
- Skærm Westinghouse
- Skærm Element
- Skærm Thomson
- Skærm Hyundai
- Skærm Yorkville
- Skærm Burg Wächter
- Skærm JBL
- Skærm Black Box
- Skærm Hisense
- Skærm DataVideo
- Skærm RCF
- Skærm Maxell
- Skærm Hannspree
- Skærm Omron
- Skærm JVC
- Skærm Honeywell
- Skærm Razer
- Skærm Medion
- Skærm Haier
- Skærm Cisco
- Skærm Huawei
- Skærm König
- Skærm ProXtend
- Skærm Alpine
- Skærm 3M
- Skærm Festo
- Skærm Danfoss
- Skærm Tripp Lite
- Skærm BenQ
- Skærm Jensen
- Skærm Xiaomi
- Skærm Viewsonic
- Skærm Dell
- Skærm Schneider
- Skærm ELO
- Skærm Vivitek
- Skærm Fujitsu
- Skærm Cooler Master
- Skærm PreSonus
- Skærm Tesla
- Skærm MSI
- Skærm NEC
- Skærm Stairville
- Skærm CTOUCH
- Skærm ESI
- Skærm Ikan
- Skærm Velleman
- Skærm Marshall
- Skærm Blue Sky
- Skærm JUNG
- Skærm Fostex
- Skærm Focal
- Skærm Genelec
- Skærm Ring
- Skærm KRK
- Skærm NZXT
- Skærm Thermaltake
- Skærm ART
- Skærm Newline
- Skærm Hikvision
- Skærm Archos
- Skærm Monacor
- Skærm Samson
- Skærm Yealink
- Skærm Xerox
- Skærm Midas
- Skærm Marshall Electronics
- Skærm I3-Technologies
- Skærm IK Multimedia
- Skærm Orion
- Skærm Kramer
- Skærm ElectriQ
- Skærm Onyx
- Skærm VIZIO
- Skærm ITek
- Skærm Hercules
- Skærm Prowise
- Skærm Bauhn
- Skærm Christie
- Skærm V7
- Skærm Vorago
- Skærm AVUE
- Skærm Genee World
- Skærm Faytech
- Skærm Avantone Pro
- Skærm Voxicon
- Skærm Vimar
- Skærm Continental Edison
- Skærm Dynaudio
- Skærm Iiyama
- Skærm Dahua Technology
- Skærm AG Neovo
- Skærm Joy-It
- Skærm SPL
- Skærm Kogan
- Skærm Barco
- Skærm Fujitsu Siemens
- Skærm LC-Power
- Skærm Postium
- Skærm Neat
- Skærm Planar
- Skærm QOMO
- Skærm Mobile Pixels
- Skærm Ernitec
- Skærm RGBlink
- Skærm Eizo
- Skærm HoverCam
- Skærm Soundstream
- Skærm Advantech
- Skærm Triton
- Skærm Extron
- Skærm Legamaster
- Skærm Ikegami
- Skærm Pelco
- Skærm Approx
- Skærm Yeyian
- Skærm GVision
- Skærm Posiflex
- Skærm Antelope Audio
- Skærm Mach Power
- Skærm AOpen
- Skærm HELGI
- Skærm Desview
- Skærm Alogic
- Skærm ProDVX
- Skærm SWIT
- Skærm Feelworld
- Skærm Wisenet
- Skærm KeepOut
- Skærm Elvid
- Skærm Wohler
- Skærm SmallHD
- Skærm Titan Army
- Skærm BookIT
- Skærm Delvcam
- Skærm Dough
- Skærm Xenarc
- Skærm Japannext
- Skærm Flanders Scientific
- Skærm TRIUMPH BOARD
Nyeste Skærm Manualer
25 Marts 2025
24 Marts 2025
22 Marts 2025
18 Marts 2025
14 Marts 2025
14 Marts 2025
14 Marts 2025
14 Marts 2025
14 Marts 2025
14 Marts 2025