Honeywell ST9400C Manual


Læs nedenfor 📖 manual på dansk for Honeywell ST9400C (3 sider) i kategorien Temperaturregulator. Denne guide var nyttig for 42 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/3
Guide to the Use of the ST9400C Programmer
This user guide is for guidance only and at the time of production represented the latest information available to Honeywell from various sources.
Honeywell reserves the right at any time and without notice to change any product, specification or any other information contained in this publication and
cannot accept any responsibility for loss or damage arising out of any errors that may inadvertently be contained herein.
EN2H-2101 UK01 R1009
honeywelluk.com
How do I use the OVERRIDE buttons?
There are two OVERRIDE buttons, one for
Heating and one for Hot Water (marked on the
image).
To turn the Hot Water on and override the set
programme press the Hot Water OVERRIDE
button marked in the picture. The indicator light will
light up to confirm the Hot Water is on.
To turn the Hot Water off again press the
OVERRIDE button.
Alternatively the next time the programmer is set
to switch on or off the override will be cancelled.
The OVERRIDE button will only work in the AUTO
and ONCE modes. It will NOT work in the OFF or
CONT modes. To change the mode press the
button marked ‘A’ for Hot Water and ‘B’ for Heating
in the picture. Each time you press the button it will
move through the list of modes above it.
To override the Heating follow the same
instructions as above but with the Heating override
button marked in the picture.
How do I use the EXTRA HOUR buttons?
There are two EXTRA HOUR buttons, one for
Heating and one for Hot Water (marked on the
image).
Press the button once to bring the Heating or Hot
Water on for 1 hour. Press the button a second
time to bring them on for 2 hours and a third for 3
hours. To turn the override off press the button a
fourth time.
The EXTRA HOUR button will only work in the
AUTO, ONCE and OFF modes. It will NOT work in
the CONT mode. To change the mode press the
button marked ‘A’ for Hot Water and ‘B’ for Heating
in the picture. Each time you press the button it will
move through the list of modes above it.
Hot Water
EXTRA
HOUR
Heating
EXTRA HOUR
Heating
OVERRIDE
Hot Water
OVERRIDE
Hot Water
indicator light
Heating
indicator light
ABList of
modes for
Heating
List of
modes for
Hot Water


Produkt Specifikationer

Mærke: Honeywell
Kategori: Temperaturregulator
Model: ST9400C

Har du brug for hjælp?

Hvis du har brug for hjælp til Honeywell ST9400C stil et spørgsmål nedenfor, og andre brugere vil svare dig




Temperaturregulator Honeywell Manualer

Temperaturregulator Manualer

Nyeste Temperaturregulator Manualer

JUNG

JUNG TVA230NCWW Manual

1 Oktober 2024
JUNG

JUNG TRGO2 Manual

29 September 2024
Voltcraft

Voltcraft ETC-200 Manual

20 September 2024
JUNG

JUNG TRME2 Manual

19 September 2024
Dimplex

Dimplex AR99DC1 Manual

18 September 2024
Fluke

Fluke 5606 Manual

4 September 2024
Emko

Emko ESM-1520-N Manual

30 August 2024
Emko

Emko ECO PID+ Manual

30 August 2024
Emko

Emko Eco PID Manual

30 August 2024
Emko

Emko Eco Lite Manual

30 August 2024