Iconbit FTB7000DUO Manual

Iconbit power bank FTB7000DUO

Læs nedenfor 📖 manual på dansk for Iconbit FTB7000DUO (1 sider) i kategorien power bank. Denne guide var nyttig for 8 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Keep your power bank operating to the fullest potential, by
following the below steps:
1. Re-charge your power bank once every three months
when it is not in use.
2. Keep the power bank away from any moist environment
and corrosive material.
3. Never wash the power bank with any chemicals, soaps
or detergents.
1. Simply using the attached USB cable to charge the digital
product, One end of the USB cable connect with the "OUT"
port of the power bank, another end connect with the
digital product with converted tip. Press "ON" button once,
it will start to charge and the green LED will indicate the
charging process.
2. Finishing charging or fail to connect the digital product,
the green LED will stop ashing. And the power bank
will turn o automatically after 20 seconds.
3. When on charging process, the green LED ashes quickly
means low power, and need to charge the power bank in
time.
Note: If the instantaneous current is oversize when charging
the digital product,the power bank will turn to protected
mode automatically. To relieve the protected mode just
charge the power bank.
The "IN" port is the charging port of the power bank. The
red LED will light on when charge the power bank, and the
red LED will light o after full charging.
1. USB output port
2. Turn on button
3. DC 5V input port
4. USB output port
5. Power indicator


Produkt Specifikationer

Mærke: Iconbit
Kategori: power bank
Model: FTB7000DUO

Har du brug for hjælp?

Hvis du har brug for hjælp til Iconbit FTB7000DUO stil et spørgsmål nedenfor, og andre brugere vil svare dig




power bank Iconbit Manualer

power bank Manualer

Nyeste power bank Manualer