Iget M3P9 Manual

Iget Detektor M3P9

Læs nedenfor 📖 manual på dansk for Iget M3P9 (2 sider) i kategorien Detektor. Denne guide var nyttig for 7 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Working Voltage DC 1.5V
Battery 1 × AAA battery(1.5V)
Working Current 55~65mA
Standby Current 9.5μA~11μA
Transmission Distance Without obstacle 100m
Transmission Frequency 433.29MHz
Working Temperature -10~40
Humidity ≤90%rh (non-condensing)
Weight 32.3g(Battery not included) 43.5g(Battery included)
Dimension Transmitter :80.0mm*38.2mm*13.3mm(L*W*H)
Connecting Line: 21cm
Installation Manual |
Wireless Water Intrusion Sensor
Instalační Manuál | Bezdrátový detektor vody
Inštalačný Manuál | Bezdrôtový detektor vody
Website : www.iget.eu E-mail : sales@iget.eu
Features
Parameters
Appearance
The iGET SECURIT Y M3P9 wireless water intrusion sensor is an accessory of M3/M4 series smar t alarm system. It's fashion
design, energy saving, and low battery warning supported. The main panel will send a SMS to user for battery replacement
when needed. It triggers alarm when detecting water intrusion.
SECURITY M3P9
PCB Layout
Operating Instructions
Installation & Notice
Battery replacement instructions
1. Working principle
The transmitter sends trigger signal to paired main panel when the sensor detects water intrusion.
2. Pairing with main panel by App
Scan the QR code printed on the sensor and follow the guideline in App to continue.
The pairing result would be confirmed by SMS sent from main panel.
Trigger Mode Clarication
• Open the case and remove the battery insulative strip.
• Pair it with panel by App before installing.
• Attach the transmitter with the double-side sticky tape to proper positon. Avoid installing it in any area with a large amount
of metal or electric wires.
• Fix the connecting line on wall or any proper position.
• Fix the probe on detecting position. Aoivd installing it in any area with rains, heavy smoke or oil, or with heavy water vapour.
• To ensure long-term reliability, please clean and maintain the probe surface regularly.
Insert the flat blade of a small screwdriver into the pr y-off
slot of transmitter, twist the blade to remove the cover.
Trigger Mode Clarication
Close Deactivated when triggered
Instant Activated when ARM/HOME ARM
24 Hours Activated even when DISARM
Home Deactivated when DISARM/HOME ARM
Door Chime No alarm but clanking
Delay Wait few seconds before alarm
Replace with 1xAAA battery.
12
LED Indicator
Transmitter
Probe
Connecting Line


Produkt Specifikationer

Mærke: Iget
Kategori: Detektor
Model: M3P9

Har du brug for hjælp?

Hvis du har brug for hjælp til Iget M3P9 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Detektor Iget Manualer

Iget

Iget M3P9 Manual

25 August 2024

Detektor Manualer

Nyeste Detektor Manualer

IFM

IFM O5P503 Manual

22 November 2024
Sauter

Sauter SP 200K Manual

21 November 2024
Sauter

Sauter SO 200K Manual

21 November 2024
Toolcraft

Toolcraft LDM D30 Manual

18 November 2024
Mercury

Mercury COD-831 Manual

16 November 2024
Amprobe

Amprobe ULD-400-T Manual

30 September 2024
Hager

Hager EE809 Manual

21 September 2024