ILive IAT61 Manual

ILive Lettelse IAT61

Læs nedenfor 📖 manual på dansk for ILive IAT61 (2 sider) i kategorien Lettelse. Denne guide var nyttig for 11 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
LED Light Strip
Users Guide for Model IAT61 v2797-01
Back of TV or Monitor
Fold at corners as shown.
Features
Length: 6.5 ft/2M
Width: .4 in/10mm
32 LEDs total (5050 RGB LED)
5V USB power input
Self adhesive, double sided backing
Includes
USB cable with built-in remote receiver
Remote control with CR 2025 battery included
Installation
1. Clean the surface to which you’re going to attach the light strip. The example shown below represents the
back of a TV or computer monitor.
2. Peel the backing strip o the adhesive tape on the LED strip.
3. Press and hold the LED strip to the surface.
4. Connect the USB cable to a USB port on the TV or monitor, or a USB power adapter (not Included).
5. Use the remote to change LED color, brightness, and ash settings.
The remote receiver does not need to be visible or have direct line of sight with the remote, and can be
fully hidden behind your TV, monitor, etc.
You may cut the strip to t smaller areas. Using scissors, cut on the visible line between LEDs.
Connect USB plug
to an available USB
outlet or a USB power
adapter (not included)
The remote receiver is built
into the USB power cable.


Produkt Specifikationer

Mærke: ILive
Kategori: Lettelse
Model: IAT61

Har du brug for hjælp?

Hvis du har brug for hjælp til ILive IAT61 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Lettelse ILive Manualer

ILive

ILive IAT651BDL Manual

1 September 2024
ILive

ILive IAT151 Manual

1 September 2024
ILive

ILive IAT61 Manual

1 September 2024
ILive

ILive IAT60 Manual

1 September 2024

Lettelse Manualer

Nyeste Lettelse Manualer