IMaze Pocket Mate Manual

IMaze Pocket Mate

Læs nedenfor 📖 manual på dansk for IMaze Pocket Mate (4 sider) i kategorien . Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/4
Support
If you have any questions, please email us at support@iMazecorp.com
You can also consult troubleshooting and FAQ guides on our website.
How to replace the battery?
1-
Pull the battery tray from the battery compartment to remove and extract the battery.
2-
Replace the battery (CR2025) by inserting as indicated by the polarity markings (+/-).
3- Push the battery tray inside the battery compartment. Make sure the 0-ring is
in the right position and that the polarities are correct.
Precautions and safety instructions
1. Do not expose the product to rain, snow or excessive moisture.
2. Do not immerse the product in water. If liquid is spilled onto it, dry it immedia-
tely with a soft, lint-free cloth.
3. Do not dismantle the product or attempt maintenance yourself.
4.
This product contains an e-cell battery, do not dispose the product into
household trash; instead, store it separately and contact your local dealer for
disposal.
5. Do not throw the product into fire.
6. This product is not intended for use by young children or infirm persons without
supervision.
FCC regulation
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class C
digital device pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy
and if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Please Note: Any change or modification, which has not been expressly authorized by
iMaze,
is liable to invalidate the authorization granted to the user for the use of the
equipment.
CE declaration of conformity
Product name: Bluetooth 4.0 security tag
Is herewith confirmed to comply with the requirements set out in the Council (European
parliament) Directive on the Approximation of the Laws of the Member States relating
to Electromagnetic Compatibility of Radio and Telecom device (1999/5/EC). For the
evaluation regarding this Directive, the following standards were applied:
EN300 328 V1.7.1:2006
EN301 489-1 V1.9.2:2011
EN301 489-17 V2.1.1:2009
EN62479:2010
EN60950-1/A12:2011
Warranty limitation
iMaze guarantees the initial purchaser that this product is free from defects of
materials or manufacture for a period of two years from the date of purchase.
Please keep your receipt as proof of purchase.
- This warranty does not cover damage resulting from misuse, from a failure to
respect the precautions for use, from accidents, from improper maintenance,
from commercial use or from use of non-approved software applications.
- This warranty does not cover lost (device and data) resulting from malfunction
or misuse of the product.
- This warranty does not cover damage resulting from repairs carried out by
persons not authorized by iMaze.
- The warranty does not cover batteries or cracked or broken casings where signs
of a blow are evident.
-
All photos and pictures representing our products on packaging are not contractual.
ref. pack: imaze02-PGSI002-EN
www.iMazecorp.com
© 2012 iMaze, Inc. All rights reserved. All trade and brand names are registered
trademarks of their respective manufacturers.
C
R
2
0
3
2
3
V
O
L
T
S
L
I
T
H
I
U
M
C
E
L
L
C
R
2
0
3
2
3
V
O
L
T
S
L
I
T
H
I
U
M
C
E
L
L
C
R
2
0
3
2
3
V
O
L
T
S
L
I
T
H
I
U
M
C
E
L
L
CCA
J
12
LP
2150
T
1
Thank you for purchasing this iMaze product. After setting up your profile with the
smartMate tracker app, this Bluetooth smart security tag can protect your smartphone
or tablet against loss and unapproved accesses. In addition to keeping your smart
devices safe, the Pocket Mate can also accurately track your other valuables.
WARNING
- Read all instructions thoroughly before use.
- This product is incompatible with Bluetooth 2.0 enabled devices (or lower) such
as iPhone® 3/3S/4 and iPad® 1st and 2nd generations.
-
iPhone, iPad, or other Bluetooth 4.0 enabled smart device is not included in the box.
- This product must be paired to your device using the app.
Device compatibility
Pocket Mate is compatible with the latest generations of iPod touch, iPhone and iPad
and others including:
- iPhone® 4S and 5
- iPad® 3rd generation and iPad® mini
- Other Bluetooth 4.0 enabled smart devices
Software compatibility
The security tag must be paired to your device using the app
smartMate tracker
to
connect. Do NOT try to pair the tag directly with your device in Bluetooth Settings.
The security tag may work with other apps but it may connect differently than the
iMaze app does. Please see the other app's website for detailed instructions on
installation and use. You must pair and connect the tag separately with each app you
use. You can’t connect in one app and have it recognized in others.
Check on our websites for the available smartMate application compatible with your device.
What’s in the box?
• Pocket Mate Bluetooth 4.0 security tag
• Accessories: Tag leash (a), Lanyard (b), Snap hook (c)
• Quick Start Guide
• Product Guide and Safe Use Instructions
Security tag overview
1. Operating light (Red)
2. Push button
3. Battery tray release
4. Tag leash hole
Where to put the security tag?
Use the leash (a) to attach the security tag to one of your personal valuables (wallet,
key, bag) or to the carrying accessories [lanyard (b), snap hook (c)] if you prefer to
carry it as a necklace or on your belt. You can also simply put it in your pocket.
How does the security tag work?
Once connected using the app, the security tag creates a permanent wireless link
with your smart device (0~15m radius). You will be alerted when the devices are
separated.
* You and your smart device
Technical specifications
Certified bluetooth 4.0
Adjustable tether distance up to 15m (in open areas without interference)
Replaceable battery CR2025
Battery autonomy in normal use: > 1 year
Water resistance IPX3 rated
Operation temperature: 0°C ~ 50°C
Storage temperature: 20°C ~ 60°C
Weight: total ~28g = ~ 8g (unit) + ~12g (Lanyard) + ~8g (snap hook)
Pocket Mate
Bluetooth 4.0 security tag
TAG5-BLE/001-BL
Outside the radius
Out of range
=
No connection
Move outside the radius
Link-loss
Tag out of range
Inside the radius
Within the range
=
Permanent connection
0-15m wireless tether
connection range
Move inside the radius
Link-recovering
Tag in range
(a) (a)
(b) (c)
(a)
4
3
2
1
EN
PRODUCT GUIDE AND SAFE USE INSTRUCTIONS
*


Produkt Specifikationer

Mærke: IMaze
Kategori:
Model: Pocket Mate

Har du brug for hjælp?

Hvis du har brug for hjælp til IMaze Pocket Mate stil et spørgsmål nedenfor, og andre brugere vil svare dig




IMaze Manualer

IMaze

IMaze Pocket Mate Manual

1 August 2024

Manualer

Nyeste Manualer