Innovv H5 Manual

Innovv dashcam H5

Læs nedenfor 📖 manual på dansk for Innovv H5 (2 sider) i kategorien dashcam. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

The INNOVV H5 is a high-end helmet camera specially designed for motorcycle enthus

Utilizing unique anti-shake and stabilization technology, the H5 is a perfect lightweight

motion environment. The DVR comes with a removable battery which can be replaced w

recording without power loss anxiety. 󵿎

1. Max resolution 4K at 30 FPS up to 20 mega pixels for images.

2. Anti-Shake by EIS offers a more stable image recording ability.

3. Equipped with a helmet microphone with wind/noise reduction technology for a clea

recording.

4. The removable battery life is up to 5 hours and the alternative power supply offers ev

recording time.

5. Supports up to 512GB TF card.

6. The waterproof rating of the whole system is IP65, which meets the requirements of s

waterproof and dustproof.

7. Small sized DVR allowing for various and easy installations.

1. Lens

2. DVR

3. Wi-Fi indicator

4. Button

5. Recording indicator

6. Upper & Lower buckle

7. Type-C USB connector

8. Power Supply

9. Power extension cable

10. USB connector

11. Battery

12. Type-C USB connector

13. Type-C USB charging port

14. Charging indicator

15. Type-C USB cable

16. TF card socket

17. Internal microphone

INNOVV H5 Helmet Cam

INNOVV H5 Product Overview

TF-Card & InstallationInstruction

Installation Guide

The instruction manual was made in June 2022. Due to product upgrades, INNOVV reserves the right to make final revisions to the instruction manual without further notice.

We recommend using a TF card with High Endurance Type, U1/U3 or

above rating (UHS Speed Class 1 or 3).

Please note that the TF card should be formatted to FAT32 for

the first time using.

Format the TF-card

Format the TF-card in camera:

Insert the TF card into the camera and format the card by the

INNOVV App via settings menu.

Format the TF-card on computer:

Insert the TF card into a computer and format it as FAT32.

Insert the TF-card into the TF card socket in the forward direction.

Charging the Battery

DVR Installation

Step 1. Disconnect the battery.

Step 2. Insert the USB Type-C cable in the connector port of the battery.

Step 3. Connect the USB cable to a power supply (i.e., adapter, power bank, etc.)

* The output of the power supply should be 5V/2A.

Caution: The battery is not waterproof when separated from the DVR. Handle it with care and keep it

away from liquids and moisture.

Step 1. Unlock the upper and lower buckles of the

DVR.

Step 2. Connect the Type-C connector of the battery to

the Type-C port of the DVR.

Step 3. Lock the buckles tightly.

Caution: The DVR is not waterproof when separated from the Battery.

Handle it with care, and keep it away from liquids and moisture.

DVR Installation onto Helmet

The camera bracket can be positioned on the left, right side or top of your helmet.

Step 1. Stick the side/top mount bracket into place on the helmet.

Step 2. Slide the DVR into place on the side/top mount bracket.

Step 3. Enter the App by connecting H5 Wi-Fi, then click to start recording.

Step 4. Adjust the camera position according to personal preference and lock the back mount into place.

INNOVV H5 Helmet Cam

Wi-Fi connection tips

Indicator Instructions

Specifications Troubleshooting

List

1. The H5 is a high precision product which should not be dropped or severely impacted.

2. Do not immerse the H5 in water as it may cause product failure.

3. Never take the product close to a strong magnetic field such as magnet, electrical machinery, or it may cause product failure

such as image damage or voice failure.

4. Do not store the H5 in a high temperature environment.

5. Please use a TF card with high endurance type to maintain a perfect performance.

6. Do not place the TF card in a strong magnetic field as it may cause data loss in the TF card.

7. The recommended charging temperature is from 0°C to 50°C, higher or lower temperature may shorten the battery life.

8. In case of any heat, smoke or smell of something unusual, please stop charging by unplugging the power supply to avoid fire.

9. Keep the unit away from the reach of children while charging, it may cause suffocation or shock.

10. Store the H5 and the battery in a dry, clean, cool and proper temperature environment.

11. It is not recommended to remove the battery or disconnect the power supply USB cable when the camera is recording (it

may cause video loss or damage).

12. Please be sure the camera is off when you try to remove the battery or USB cable .

Status Bu ontt Recording Indicator Wi-Fi Indicator Vibration

Turn On/Recording

Pre the Bu on for 1 ss tt

Second

Solid On Flashing Two Short Vibrations

Turn Off

Long Pre the Bu on ss tt

for 4 Seconds

Off Off One Long Vibration

Snapping a Picture Pre the Bu on for ss tt

Once

Flash Once One Short Vibration

Record Pause Flashing

Low Ba ery Flash Thr Times Flash Thr Timestt ee ee Thr Short ee

Vibrations

No TF Card Flashing

Short Vibration Every

3 Seconds

Firmware Updating

Wi-Fi Co ecting Flashingnn

Wi-Fi Co ected So d Onnn li

Wi-Fi Off Off

Reset to Default

Se ingstt

Long Press the Button

for 10 Seconds

Alternate Flashing Betw n Two Lightsee

*Only E ective When the DVR is Turned offff

Button & Indicators

Status

Charging So d Onli

Fu y Charged So d Onll li

Indicators in the ba erytt

Important

Item Quantity Item Quantity

DVR 1 Mo t for Helmet 1un

Ba ery 1 USB Cable 1tt

Power Su ly 1pp

Ma alnu

Mo t for Bicycle 1un

Back Mount

pcs

set pcs

pcs

set

Customer Support

Download the manual and check out our official website for more details

about INNOVV products and accessories: www.innovv.com.

If you have any comments, suggestions, or require customer support:

Please contact your place of purchase.

Connect to a power

supply

*Align

Wi-Fi

Led

Button

Recording

Led

Charging

Led

No Problem Solution

The H5 is vibrating with the

light indicator blinking slowly.

Please confirm the TF card is inserted

properly, you are suggested to choose

another card with higher standard.

The H5 Wi-Fi is not found.

󵿎

Please check if the green light is blinking

or not, and press the light indicator to

activate the Wi-Fi.

The H5 is not powered on or

automatically shuts down after

being powered

1. Please confirm the battery is sufficient.

2. Please make sure the USB power

supply is 5V/1A or higher.

3. Please check if the USB power supply is

inserted properly or damaged.

5The indicator light is off when

being charged.

1. Please check whether the charging USB

cable is plugged in or damaged;

2. Please check whether the adapter

is working properly.

6It takes quite a long time to

charge the H5 battery.

1. Please choose a power supply with

5V/2A.

2. Please be sure the charging

temperature is between󵿎0℃-55℃.

3. Please charge the H5 by the original

Type-C cable.

I can’t access the App since

I forget the password.

󵿎

Power off the H5, press the light indicator

until the red light is off after about 10

seconds blinking. The Wi-Fi password will

be defaulted as 12345678.

1. Install App: Scan the QR code on the right or download the INNOVV H5 from App market.

2. Assemble the camera: Insert the TF card, power on the unit by the INNOVV USB power supply or INNOVV battery.

3. Starting up: Press the button for 1 second, the camera will work once the red light is on after two short vibrations.

4. Connect to the Wi-Fi: Enter the App on your mobile phone by connecting the Wi-Fi , the defaulted password INNOVV H5_******

is , the green light will be solid on after connected, green light will keep flashing if the Wi-Fi connection has failed.12345678

5. Record pause: Click in the App interface, the red light flashes when recording is paused, the camera will resume to recording

by click again.

6. Snapping pictures: Press the button once while the camera is recording, the red light will flash one time, the photo will be saved in the “photo” file.

7. Activate the Wi-Fi: The green light will go off in the power down mode, if you need to activate the Wi-Fi, please press the button and the green light will flash,

meanwhile, there is a snapped picture be taken and saved in the “photo”file.

8. Turn off the camera: The camera will go off after a long press of the button for 4 seconds, and the red light will be off after a short vibration.

9. Copying videos: Take off the TF card from H5 and copy the videos in your computer, or check the videos by connecting the camera to the PC by an USB cable.

10. Reset the camera: Reset the H5 by removing the battery or disconnecting the USB power supply .

11. Factory default settings: Restore the default settings by pressing the button for more than 10 seconds when the camera is off, there will be two short vibrations

and along vibration during the process.

12. Firmware update:

-PC: Copy the firmware to root of TF card.INNOVV H5.BRN

-Camera: Copy the firmware to a TF card, insert it into the camera, press the button, the firmware will be automatically updated INNOVV H5.BRN

and green light flashing alternately).

13. More functions: Please refer to the App interface for more functions.

User Guide

③ ④

⑤⑥

⑦

⑧

⑨

⑩

11 12

Camera Files Local Files

Photo Mode

Camera

Preview

Document

Photo Mode/Taking

Photo

Settings

Recording

Mode

Battery

Zoom in And

Out

Forum

Feedback

FAQ

Privacy-Policy

Recording

Preview

Recording Mode

/Record Pause

INNOVV Website

WiFi SSID Modification

Item

WiFi Password

Modification Item

Options for Automati-

cally Turn off WiFi

Options for Light

Source Frequency

Options for Image Size

Date Stamp

Options for Video Size

Options for Bitrate

Options for Fast

Motion Movie

Options for Slow

Motion Recording

Options for Loop

Recording

Options for Vibration

Switch

Options for EIS

Stabliztion

Options for Distortion

Correction

Options for Video File

Length

Options for Recording

Volume

Options for Video

Marker

TF Card

Memory

TF Card

Remaining

Memory

TF Card

Formatting

File Path

Firmware

APP Version

TF Card Status

Side mount bracket Top mount bracket Side mount Top mount

Step 1. Stick the microphone inside

the helmet.

Step 2. Adjust the microphone to

personal preference for optimal

recording.

DVR Installation onto Bicycle

Fix the DVR on the bicycle with the handle bar bracket.

Step 1. Fix the handle bar bracket on the bicycle.

Step 2. Slide the DVR into the back mount.

Step 3. Turn on the DVR and enter the App by connecting the H5 Wi-Fi.

Step 4. Adjust the camera direction and lock the back mount into place.

* Power bank

*Handle bar bracket

App interface

Color S ver Gray Input 5V 2Ail

Insta ation ll Position Side mo t/T un op

mount Capacity

2400mAh

Waterproof Rate IP65 Charging Time Mi tes150 nu

Housing Material Engin ring Plastics Charging Temperature 0 ~50ee ℃ ℃

Size L *W *H mm Storage Temperature -5 ~45110 32 55 ℃ ℃

Weight

150g - -

Proce or A7 Data Interface B Type-C ss US

Field of View ° Input Voltage 5.0V120

Anti-Shake EIS Input Cu ent 1Arr

Sensor Gyrpsc e Ba ery Removableop tt

Special F ction Vun ibration

Battery Life

300 mi tes nu

Wi-Fi 2.4G Working Temperature -5 ~45℃ ℃

Storage TF Card, 8GB~ GB Storage Temperature -10 ~50512 ℃ ℃

Photo Format JPEG Video Format MP4

Photo Resolution

DVR Parameters

20 5120M( *3840) ) M( * ) 5M( *10 3648 2736 2592 1944

Video Resolution

4K/ fps, 2.7K/ fps (Su rts slow motion), 2.7K/ fps30 60 ppo 30

1080 60P/ fps (Su rts slow motion), P ( * )/ fps ppo 1080 1920 1080 30

720 60P/ fps (Su rts slow motion)ppo

Structural Parameters Ba ery Parameters tt

Operating M e System: Android 5.1 / iOS 8.3 and a veobil bo

Options for Image

Inversion

Options for Special

Effects

Options for Metering

Mode

Options for White

Balance

Options for

Exposure

Compensation

Time

Calibration

Restore

Factory

Settings

Clear Chache

with red light

and green light flashing alternately. The firmware in the card will be deleted once the update succeeds (Caution: The power can not be cut off when the red light

Gr nRed ee