Insignia NS-SDSK-MH Manual
Læs nedenfor 📖 manual på dansk for Insignia NS-SDSK-MH (2 sider) i kategorien Bureau. Denne guide var nyttig for 13 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/2
QUICK SETUP GUIDE
Standing Desk
NS-SDSK-BL / NS-SDSK-MH / NS-SDSK-AK
NS-SDSK-BL-C / NS-SDSK-AK-C
MAJOR PARTS LIST
SMALL PARTS LIST
No. Part Qty
A
2
B 4
C 8
D 1
M6 x16
ST4.2*19
M6×16
4 x 4
5 x 5
No. Part Qty
1 1
2 1
3 1
4 2
5 1
6 1
7 1
8 4
9 1
Tabletop
Left column
Right column
Feet
Power Plug
Adapter
Cable ties
Hand switch
D
C
× 8
A
D
× 2
5 × 5
4 × 4
× 4
4 × 4
C
D
Before using your new product, please read these instructions to prevent any damage.
PACKAGE CONTENTS
• Standing desk
• Small parts list
• Quick Setup Guide
FEATURES
• Easily adjusts to a comfortable height with a hand switch
• 19.7 in (50 cm) of height adjustment lets you use the desk while standing or sitting
• The desktop holds up to 110 lbs. (50 kg) and is suitable for a computer, printer, or
sewing machine (within the weight limit)
• Cable management for a clean look
• Choice of two colors, black or mahogany (both with black frame)
• Electric adjustment switch easily raises or lowers the desk height
• Steel frame with particleboard tabletop provides a stable work surface
Top view
D
INSTALLING THE LEGS
1 Place the desktop upside down on a carpet or protective cloth.
Note: Make sure that both legs are at their lowest setting
(turn the shaft in each leg to do this) before installation so
that the table will be level when assembled.
2 Insert the hexagonal shaft in the rst leg into the corresponding hole in
the desktop leg mount, then turn the leg until the screw holes line up and the
connecting cable on the top of the leg faces the in toward the motor.
3 Attach the leg to the desktop with four M6 × 16 screws, tightening them
rmly with the 4 × 4 Allen key.
4 Repeat the steps to attach the other leg .
Note: See the section on “Installing the Adapter and Connecting the Cables” for cable
connections.
D
C
Adjustable pad
Hand switch
D
B
2
INSTALLING THE FEET
Attach the feet to the bottoms of the legs with four 6 × 16 screws each. Make
sure that the adjustable pads on the bottom of the feet face down and the long
portion of each foot faces forward (as shown).
INSTALLING THE SWITCH
Attach the switch to the bottom of the desktop with two ST4.2*19 screws.
Tighten the screws with the 5 × 5 Allen key. Make sure that the at side of the
switch is against the desktop and the UP and DOWN buttons are facing forward.
B
TWO PERSON
LIFT REQUIRED
8
9
2
D
A
Adapter cable
Produkt Specifikationer
| Mærke: | Insignia |
| Kategori: | Bureau |
| Model: | NS-SDSK-MH |
Har du brug for hjælp?
Hvis du har brug for hjælp til Insignia NS-SDSK-MH stil et spørgsmål nedenfor, og andre brugere vil svare dig
Bureau Insignia Manualer
2 September 2024
Bureau Manualer
- Bureau Ikea
- Bureau Sandberg
- Bureau Butler
- Bureau Zaor
- Bureau Parisot
- Bureau NewStar
- Bureau Fellowes
- Bureau Digitus
- Bureau Arozzi
- Bureau Cougar
- Bureau Genesis
- Bureau Foppapedretti
- Bureau Cooler Master
- Bureau Paidi
- Bureau Corsair
- Bureau Bush
- Bureau Thermaltake
- Bureau Projecta
- Bureau Manhattan
- Bureau Bretford
- Bureau Ahrend
- Bureau Chief
- Bureau Sharkoon
- Bureau Livarno Lux
- Bureau BDI
- Bureau Kogan
- Bureau LC-Power
- Bureau Overdrive
- Bureau Gamdias
- Bureau Lian Li
- Bureau Victor
- Bureau Hooker
- Bureau Alpha Gamer
- Bureau Bell'O
- Bureau Piranha
- Bureau Four Hands
- Bureau Durable
- Bureau Glorious
- Bureau Gami
- Bureau HJH Office
- Bureau X Rocker
- Bureau ThunderX3
- Bureau Bestar
- Bureau Zomo
- Bureau Huzaro
- Bureau AeroCool
- Bureau Ultradesk
- Bureau HON
- Bureau Lazy Maisons
- Bureau Worktrainer
- Bureau Anthro
- Bureau OKA
- Bureau Game Shark
- Bureau Seville Classics
- Bureau Yaasa
- Bureau CoolerMaster
- Bureau FOURZE
- Bureau Ergolux
Nyeste Bureau Manualer
17 December 2024
17 December 2024
17 December 2024
17 December 2024
17 December 2024
10 December 2024
8 December 2024
8 December 2024
8 December 2024
8 December 2024