James 63SA-7HO Manual

James Højttaler 63SA-7HO

Læs nedenfor 📖 manual på dansk for James 63SA-7HO (1 sider) i kategorien Højttaler. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/1

SMALL APERTURE

SHEETROCK INSTALLATION

Sheetrock - Cut Sizing Chart

Model 5” Sheetrock Trim Kit 4” Round Sheetrock Trim Kit 3” Round Sheetrock Trim Kit

Round Square Round Square Round Square

SA53 Ø 5.22”

(133mm) - - 4.22” x 4.22”

(107mm x 107mm) - -

SA63 Ø 5.23”

(133mm) -Ø 4.34”

(110mm)

4.26” x 4.26”

(108mm x 108mm)

Ø 3.25”

(83mm)

3.25” x 3.25”

(83mm x 83mm)

SA101 Ø 5.10”

(130mm) - - 4.35” x 4.35”

(110mm x 110mm) - -

Determine the placement of the Small

Aperture sub assembly and secure the

unit between two wall studs. We

recommend using a block of wood, xed

between the studs, to aid in the leveling

process (Wall mounting process shown).

On a free piece of sheet rock cut a hole

that is large enough for the sheetrock

plug to t through, yet small enough for

the sheetrock trim kit to sandwich the

dry wall between the SA assembly (Hole

sizing chart below - For your reference).

Once the hole is cut, the free piece of

drywall can be positioned and secured

over the SA unit and once ready the

sheetrock plug can be removed. After

the sheetrock is secured, the grille

trim kit can be secured to the unit. If

using sheetrock that is thicker than

½”, then attach appropriate trim kit

spacer before securing sheetrock trim

kit over the unit. (We recommend

testing the unit before plaster work is

performed.)

20180703

Use mesh tape to cover any

installation seams. Insert the grille

frame plug before applying joint

compound. Apply joint compound and

level out compound to conceal seams.

Remove the grille frame plug (A) and

connect the SA module to the sub

assembly as shown (B). (We recommend

using a twisting motion when inserting

the SA module (C). This prevents the ca-

ble from bunching up and obstructing the

port when the module is inserted.)

The SA MF/HF module can now be

secured into the SA assembly using

the provided socket head screws and

hex key.

Insert press t grille to complete the

installation. If desired, the grille can

be painted before being inserted to

match any surrounding installation

features.

456

Sheetrock Plug

Produkt Specifikationer

Mærke:	James
Kategori:	Højttaler
Model:	63SA-7HO
Bredde:	247.65 mm
Dybde:	161.92 mm
Højde:	345.95 mm
Vægt:	6350 g
Udgangseffekt (RMS):	125 W
Husmateriale:	Aluminium
Anbefalet brug:	Universel
Frekvensområde:	38 - 22000 Hz
Impedens:	4 ohm (Ω)
Diskanthøjttaler:	Ja
Antal drivere til diskant:	1
Sensitivitet:	88 dB
Diskant diameter:	19 mm
Bashøjttaler:	Ja
Antal bashøjttalerdrev:	1
Woofer diameter:	165 mm