Jensen JDASHCP Manual

Jensen overvåge JDASHCP

Læs nedenfor 📖 manual på dansk for Jensen JDASHCP (1 sider) i kategorien overvåge. Denne guide var nyttig for 27 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/1

QUICK START GUIDE

This Quick Start Guide gives you the basics to

start using your JDASHCP. Please visit

https://www.jensenmobile.com. to download a complete

owner’s manual or call customer service at 1-888-921-4088

(Monday-Friday, 9AM-5PM EST).

JDASHCP

Before You Start

• Avoid installing the unit where it would be subject to high temperatures from direct sunlight, dust,

dirt or excessive vibration.

Dash Mount 7" Touchscreen Monitor with Wireless Apple

® and Android™

Installation

Wiring Diagram - Inputs/Outputs

Control Locations

Main Menu

FM Transmitter

FCC Compliance

USB Operation

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

www.jensenmobile.com

NSC0624-V03

From the main menu, touch the USB icon on the main screen.

General Operation

From the Main Menu screen, select Setup to access the Settings menu and select from categories

represented by the icons on the bottom of the screen: General, Audio, Display, Others. Select the

category, and adjust any of the available options using the touch screen.

Bluetooth Operation

Before using Bluetooth

Before you can use a Bluetooth device to make hands-free calls or stream audio. it must be authenti-

cated. This is also referred to as "pairing" a device.

[Note]

To connect wireless Apple and Android device after installing the On-Dash product in your vehicle,

you must disable the Bluetooth connection between your phone and the existing vehicle's head unit.

Additionally, the phone you want to connect to wireless Apple and Android device must not be con-

nected to any other devices via Bluetooth.

Pairing a New Device

The unit broadcasts the pairing signal constantly when no devices are currently connected. Complete

the pairing sequence from your Bluetooth device. Refer to the owner's manual for your device for more

details. The device name is "JDASHCP". The unit can be in any mode of operation when pairing is

performed. On certain phones, pairing may need to be done more than once.

Connect

The head unit will automatically connect to the last connected device when the connect feature is set to

Auto connect On. If the connect feature is set to Auto Connect Off, the head unit will not automatically

connect to any device.

Bluetooth Phone

From the main menu. touch the on the screen. Bluetooth icon will appear anytime a Bluetooth

Bluetooth device is connected.

Dialing a Number

Press to display keypad and dial a number.

Making and Ending a Call

Press to connect a call, and press to end a call.

Transferring Audio

Press - to transfer audio between the head unit and mobile phone.

Streaming Audio

Press to play or pause the music.

Press to skip to the previous track.

Press to advance to the next track.

Designed and Engineered in USA

The radio display features the following functions and displays:

Audio Operation

Press the "Settings" icon on the main menu screen to adjust the Balance and Equalizer controls

(16-Band Tone Control and 8 Presets EQ Settings).

GPS ANTENNA

Note: Use to improve map accuracy.

Voice activation button

Internal microphone

Power/mute

Dimmer

SILICON COVER

(

Cover on the back

)

WINDSHIELD / DASHBOARD MOUNT

Wired & Wireless Apple Operation

Wired connection

1. Connect an Apple compatible device to this unit via USB.

2. Press the Apple icon.

The Apple home screen appears.

Wireless connection

Before using Apple wirelessly, turn on the Bluetooth/Wifi function on

the Phone.

1. Press icon on the main menu;

2. Press " ” to confirm to use wireless

Apple

;

3. Press " ”icon to search phone device. The available devices appear on the list;

Find the desired device on the screen and

press

"Pair"

;

5. A pass key will be displayed on the screen

;

6. The same key appears on the phone, press "Pair" and then press "Allow" for the popups

;

7. Press " ” on the screen to confirm to connect

;

8. Press "Use CarPlay" on the phone. The unit configures the connection then starts the application.

Tip: Press " ” icon. Displays Apple device list. This icon appears Only When Apple is connected and two

or more devices can be used as Apple Source.

Wired & Wireless Android Operation

Wired connection

1. Connect an Android compatible device to this unit via USB.

2. Press the Android icon.

The Android home screen appears.

Wireless connection

Before using Android wirelessly, turn on the Bluetooth/Wifi function on

the Android device.

1. Press icon on the main menu;

2. Press " ” to confirm to use wireless Android;

Press " ”icon to search phone device. The available devices appear on the list;

Find the desired device on the screen and

press

"Pair";

5. A pass key will be displayed on the screen;

6. The same key appears on the Android device, press "Pair" and then press "Allow" for the popups

;

7. Press " ” on the screen to confirm to connect

;

The unit configures the connection then starts the application.

Tip: Press " ” icon. Displays Android device list. This icon appears Only When Android is connected and

two or more devices can be used as Android Source.

Speaker

12V Power Adapter

USB port for charging only (2.1A)

3.5mm output to connect audio to

your car stereo

USB Playback

Wired Apple and Android

Connection

Send audio to your

existing car stereo

through the 3.5mm

AUX output.

External Microphone

Use to improve voice quality.

Compatible With

Apple® Phones

Compatible With

Android™ Phones

In main menu, press the desired icon to enter the

corresponding mode: FM Transmitter/Android/

Apple /USB/Device/Settings. /BT Phone/BT Music

2 3

Main Menu

Current Mode Indicator

Seek Tune Up

Seek Tune Down

Preset Stations

FM Transmitter On/Off

Keypad

Main Menu

Current Mode Indicator

List

Random

Track Up

Play/Pause

Track Down

Repeat

1 2 3

89 7 6 5

Limited Two Year* Warranty

This warranty gives you specific legal rights. You may also have other rights which vary from state to

state.

Jensen warrants this product to the original purchaser to be free from defects in material and

workmanship for a period of two years from the date of the original purchase.

Jensen agrees, at our option, during the warranty period, to repair any defect in material or

workmanship or to furnish an equal new, renewed, or comparable product (whichever is deemed

necessary) in exchange without charges, subject to verification of the defect or malfunction and

proof of the date of purchase. Subsequent replacement products are warranted for the balance of

the original warranty period.

What is covered? This warranty covers all defects in the material and workmanship in this product.

The following are not covered: software, installation/removal costs, damage resulting from accident,

misuse, abuse, neglect, product modification, improper installation, incorrect line voltage, unauthorized repair, or

failure to follow instructions supplied with the product, or damage occurring during

return shipment of the product. Specific license conditions and copyright notices for the software

can be found via www.jensenmobile.com.

Warranty Coverage

* Limited 2-year warranty. (Proof of purchase required)

Extend your warranty from 2 year to 3 years when you register online at www.jensenmobile.com.

What to do?

1. Before you call for service, check the troubleshooting guide in your owner's manual. A slight

adjustment of any custom controls may save you a service call.

2. If you require service during the warranty period, you must carefully pack the product (preferably

in the original package) and ship it by prepaid transportation with a copy of the original receipt from

the retailer to an authorized service center.

3. Please describe your problem in writing and include your name, a return UPS shipping address

(P.O. Box not acceptable), and a daytime phone number with your shipment.

4. For more information and for the location of the nearest authorized service center please contact

us by one of the following methods:

• Call us toll-free at (888) 921-4088

(Monday-Friday, 9:00 am, to 5:00 pm, EST)

• E-mail us at cs@jensenmobile.com

Exclusion of Certain Damages: This warranty is exclusive and in lieu of any and all other warranties,

expressed or implied, including without limitation the implied warranties of merchantability and

fitness for a particular purpose and any obligation, liability, right, claim or remedy in contract or tort,

whether or not arising from the company's negligence, actual or imputed. No person or representative is

authorized to assume for the company any other liability in connection with the sale of this

product. In no event shall the company be liable for indirect, incidental, or consequential damages.

Produkt Specifikationer

Mærke:	Jensen
Kategori:	overvåge
Model:	JDASHCP

Har du brug for hjælp?

Hvis du har brug for hjælp til Jensen JDASHCP stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

overvåge Jensen Manualer

Jensen JDASHCP Manual

4 September 2024

overvåge Manualer

Nyeste overvåge Manualer

Philips 233V5LHAW Manual

21 December 2024

Philips 206V3LSB2 Manual

21 December 2024

HP Z23i Manual

21 December 2024

Philips Evnia 24M1N3200ZA Manual

21 December 2024

Philips Evnia 27M1N3200ZA Manual

21 December 2024

Philips Momentum 5000 27M1N5500Z Manual

21 December 2024

HP 2511x Manual

21 December 2024

Philips 86BDL4511D Manual

21 December 2024

Philips 271S9A Manual

21 December 2024

Viewsonic VX2457-HD-PRO Manual

21 December 2024