JL Audio VX600/6i Manual
Læs nedenfor 📖 manual på dansk for JL Audio VX600/6i (5 sider) i kategorien Receiver. Denne guide var nyttig for 3 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/5
6.62 in
168 mm
9.81 in
250 mm
8.72 in
222 mm
2.12 in
54 mm
5.53 in
141 mm
CONNECTION GUIDE
600W Full-Range 6-Channel Class D Amplier
with Integrated DSP
with
Thank you for purchasing a JL Audio amplifier for your sound system.
Your amplifier has been designed and manufactured to exacting
standards in order to ensure years of musical enjoyment. For maximum
performance, we highly recommend that you have your new amplifier
installed by an authorized JL Audio dealer. Your authorized dealer has
the training, expertise and installation equipment to ensure optimum
performance from this product. Should you decide to install the amplifier
yourself, please take the time to read this manual thoroughly to familiarize
yourself with its installation requirements and setup procedures.
If you have any questions regarding the instructions in this manual or any
aspect of your amplifier’s operation, please contact your authorized JL
Audio dealer for assistance. If you need further assistance, please contact
the JL Audio Technical Support Department at technical@jlaudio.com or
call (954) 443–1100 during business hours.
Installation Applications
This amplifier is designed for operation with 12 volt, negative-
ground electrical systems. Using this product in systems with positive
ground and/or voltages other than 12V may result in damage to the
product and will void the warranty. This product is not certified or
approved for use in aircraft.
Product Description
This is a six-channel, full-range Class D amplifier equipped with the second
generation of JL Audio’s NexD2™ high-speed switching technology.
It is engineered to deliver reference-grade audio amplification with
outstanding efficiency and unprecedented, built-in processing power.
Instead of traditional analog processing controlled by knobs and switches,
VXi amplifiers feature an integrated DSP (Digital Signal Processor). The
amplifier and its integrated DSP are configured using an external device
(PC, Tablet or Phone), with the appropriate JL Audio TüN™ application
installed. (See section for more info.)What is TüN?
Planning Your Installation
It is important that you take the time to read this manual thoroughly
and that you plan your installation carefully. It is very easy to damage
expensive vehicle systems in modern automobiles. Never assume that you
have found appropriate wires without consulting a reliable wiring diagram
or without analyzing with proper test equipment. If you are uncomfortable
or unfamiliar with reading diagrams or testing methods, please enlist the
services of your authorized JL Audio dealer to perform the installation.
Your authorized dealer has the training, expertise and installation
equipment to ensure optimum performance from this product.
The
following are some considerations that you must take into account when
planning your installation.
Safety Considerations
• Install your amplifier in a dry, well-ventilated location that
does not interfere with your vehicle’s safety equipment
(air bags, seat belt systems, ABS brake systems, etc.).
• Do not mount the amplifier in the engine
compartment or in any areas of extreme heat.
• Securely mount the amplifier so that it does not come
loose in the event of a collision/sudden jolt or as a result
of repeated vibrations during normal operation.
• Check before drilling to make sure that you will not be drilling into
a fuel tank, gas/brake line, wiring harness, or other vital system.
• Do not run system wiring outside or underneath the
vehicle/vessel. This is an extremely dangerous practice,
which can result in severe damage/injury.
• Take the necessary precautions when making
connections to the vehicle’s battery.
• Protect all system wires from sharp edges by carefully routing them,
tying them down and using grommets and loom where appropriate.
• Secure all wiring as needed, using cable ties or wire clamps
to protect them from moving parts and sharp edges.
Cooling Efficiency Considerations
The outer shell of your JL Audio amplifier is designed to remove heat
from the amplifier circuitry. For optimum cooling performance, this outer
shell should be exposed to as large a volume of air as possible. Enclosing
the amplifier in a small, poorly ventilated chamber can lead to excessive
heat build-up and degraded performance. If an installation calls for an
enclosure around the amplifier, we recommend that this enclosure be
ventilated with the aid of a fan. In normal applications, fan-cooling is not
necessary. If mounting the amplifier under a seat, make sure there is at
least 1 inch (2.5 cm) of space above the amplifier’s outer shell to permit
proper cooling.
What is Included
(1) Amplifier (1) Power Connector
(1) Analog Input/Pre-Out Harness (1) Speaker Output Harness
(1) JL Audio Badge (4) Corner Caps
(1) USB A/B Cable (6 ft./1.8 m) (1) Corner Cap Tool
(2) Black Hex Cap Machine Screws (1) 2.5 mm Hex Wrench
(2) Silver Thumbscrews (1) 3 mm Hex Wrench
(1) Connection Guide
JL Audio Badge
To complement the amplifier’s mounting orientation, the logo badge
includes a recessed key feature allowing it to be affixed at 90 degree
increments on the amplifier’s top. To install, remove the adhesive backing
and press the badge at the desired orientation.
Corner Cap Installation and Removal
The corner caps are designed to conceal the amplifier’s mounting holes
and hardware. To install, simply press a corner cap into each mounting
hole. To avoid scratching the amplifier’s chassis during removal, use the
included, plastic corner cap tool and lift below each cap.
Making Connections
VXi amplifiers utilize removable plugs and harnesses to make the
following connections:
• Power Connector
To connect the power, ground and remote turn-on wires to the amplifier,
back out the set screws on the connector using the supplied hex
wrenches. Strip back 3/8 inch (10 mm) of insulation from the end of each
wire and insert the bare wire into the receptacle on the power connector
plug, seating it firmly so that no bare wire is exposed. While holding each
wire in place, tighten each set screw firmly, taking care not to strip the
head of the screw. Install the power connector by plugging it into the
amplifier’s power connector receptacle, pushing firmly.
• Analog Input/Pre-Out Harness
This harness includes connections for Signal Input (RCA plugs), Preamp
Outputs (RCA plugs), Remote Turn-On Output (wire lead) and Valet Input
(wire lead). Select either the included black hex cap machine screws or
the silver thumbscrews to secure the Analog Input Harness connector to
the amplifier.
• Speaker Output Harness
This harness includes output wire leads to connect with speaker cables.
Turn-On Mode
VXi amplifiers can be switched on and off using one of three methods,
configured by the “Turn On Mode” setting in the TüN™ Software Interface.
Refer to the table below for detailed info and decide which option is best
suited for your specific system.
Setting Mode Function Connection
Remote Conventional
(Preferred)
Turn-on/off controlled by your
source unit.
Connect your source unit’s
+12V remote turn-on output to
the Power Connector’s Remote
Turn-On Input connection.
DC
Offset
DC Offset
Sensing
(Auto)
Automatically turns on by
detecting the presence of small
DC signal in OEM audio outputs
and turns off (within 5 minutes)
after the signal is removed.
This circuit senses the Analog
Input 1 only. Note: The sensitivity
of this circuit is designed for
high-level (speaker level) signals,
not for low-level (preamp level)
signals. Make sure the OEM
audio outputs contain midrange
signals.
Signal
Signal
Sensing
(Auto)
Automatically turns on by detecting
full-range OEM audio signals and
turns off (within 5 minutes) after
the signal is removed (varies,
depending on input signal levels).
3 Speaker Output Harness
Connect the speaker output leads to the corresponding speaker wires.
4 JLid-COMM
Connect optional accessories (VXi-BTC, VXi-HUB, etc.) to this port.
5 JLid-CTRL
Connect optional DRC (Digital Remote Controller) wired controllers
to this port.
6 SD + Reset
Lift the dust cover to access the following utility functions:
Reset Buttons: Use a small pin to perform the following:
Reboot Amp - Press and release the right button.
Factory Reset (wipe memory, reboot amp) - Press and hold the left
button for 7 seconds.
Micro SD Slot: For service/future expansion.
7 USB
This USB A/B port permits connection to a computer for configuration
and tuning, using the TüN™ Software.
8 DIGITAL-In
Toslink port accepts 2-channel digital audio signal from any optical
(S/PDIF) digital output, with a sample rate up to 192 kHz.
9 DIGITAL-Out
Provides a digital audio output (24 bit/96 kHz) that is not susceptible to
RF interference or noise-generating electrical conditions. By default, this
is a pass-through audio output, with no signal processing applied, and
intended for use with other equipment that have an optical (Toslink)
digital audio input (S/PDIF) port. Using the TüN™ Software Interface, you
may configure this output’s routing, equalization, output level and DRC
control functionality.
1 Power Connector
The VX600/6i’s “+12 VDC” and “Ground” connections are designed to
accept 4 AWG copper wire. Note: Copper Clad Aluminum (CCA) wire is not
recommended. 4 AWG is the required copper wire size for this amplifier.
A. Run copper wire from the positive (+12V) battery post to the amplifi-
er mounting location. If additional amplifiers are being installed, run
the appropriate gauge copper wire for the combined, maximum cur-
rent draw, and install a fused distribution block near the amplifiers.
B. An appropriate fuse (sold separately) at the main power wire(s) is
vital for vehicle safety. This fuse must be installed within 18 inches
(45 cm) of the battery post connection. If this is the only device con-
nected to this main wire, use a 50 A fuse. Do not install the fuse until
the power wire has been securely connected to the amplifier.
C. The ground connection should be made to a clean, solid metal
grounding point using copper wire, and kept as short as possible.
The metal surface of the grounding point should be sanded to create
a clean, metal-to-metal connection. For optimal grounding, we
recommend using a JL Audio ECS master ground lug (XB-MGLU). All
ground connections (source unit and amplifiers) should be made
at the same location.
D. The remote connection should be made to the source unit’s positive
(+12V) remote turn-on output. If your source unit does not have a
dedicated remote turn-on output, consider one of the alternative
turn-on options. (See Turn-On Mode section for more info.)
2 Analog Input/Pre-Out Harness
The Analog Input Harness accepts the following connections:
Line-Level Analog Inputs: Six female RCA jacks feed a differential-
balanced input section, providing a high degree of input flexibility, and
retaining superior noise rejection. This type of input architecture also
allows the VX600/6i to cleanly accept any analog audio signal up to 16
VRMS, without using a line-output converter.
Preamp Outputs: Two female, RCA jacks deliver line-level, analog audio
outputs (Max 4 V RMS) that are compatible with most types of aftermarket
equipment. These are configured with the TüN ™ Software Interface.
Remote: This connection provides a positive (+12V) turn-on voltage
(475 mA limit) to activate other aftermarket equipment (similar to an
aftermarket head unit’s remote turn-on lead).
Valet: When connected to negative ground, this connection activates the
Valet Mode Preset and will remain active until the ground connection is
removed. This preset is configured using the TüN ™ Software Interface and
will override any DRC controlled preset.
1 2 3
4 5 6 87 9
Produkt Specifikationer
Mærke: | JL Audio |
Kategori: | Receiver |
Model: | VX600/6i |
Har du brug for hjælp?
Hvis du har brug for hjælp til JL Audio VX600/6i stil et spørgsmål nedenfor, og andre brugere vil svare dig
Receiver JL Audio Manualer
12 Oktober 2024
6 Oktober 2024
4 September 2024
4 September 2024
29 August 2024
29 August 2024
29 August 2024
2 August 2024
31 Juli 2024
29 Juli 2024
Receiver Manualer
- Receiver Bosch
- Receiver SilverCrest
- Receiver Denver
- Receiver Sencor
- Receiver Sony
- Receiver Fenton
- Receiver Panasonic
- Receiver Hager
- Receiver VOX
- Receiver Pro-Ject
- Receiver Anthem
- Receiver Philips
- Receiver IFM
- Receiver Musway
- Receiver Audio-Technica
- Receiver Peavey
- Receiver Pioneer
- Receiver TOA
- Receiver Hifonics
- Receiver Sharp
- Receiver Qtx
- Receiver Dynacord
- Receiver Logitech
- Receiver Behringer
- Receiver Emos
- Receiver Kenwood
- Receiver Sandberg
- Receiver MB Quart
- Receiver Smart
- Receiver Sennheiser
- Receiver Harman Kardon
- Receiver Garmin
- Receiver Grundig
- Receiver Roland
- Receiver Asus
- Receiver Golden Age Project
- Receiver Pyle
- Receiver Argon
- Receiver Roksan
- Receiver Denon
- Receiver Yamaha
- Receiver Bowers & Wilkins
- Receiver Matsui
- Receiver Scansonic
- Receiver AVM
- Receiver Nedis
- Receiver Kicker
- Receiver Optoma
- Receiver Renegade
- Receiver LD Systems
- Receiver Hama
- Receiver Auna
- Receiver Thomson
- Receiver Aiwa
- Receiver Nokia
- Receiver Rega
- Receiver Yorkville
- Receiver Belkin
- Receiver Pyle Pro
- Receiver JBL
- Receiver AKAI
- Receiver Teufel
- Receiver DataVideo
- Receiver Strong
- Receiver Audio Pro
- Receiver RCF
- Receiver Optex
- Receiver Smartwares
- Receiver Chandler
- Receiver Trevi
- Receiver Trust
- Receiver Blaupunkt
- Receiver JVC
- Receiver Hilti
- Receiver Crunch
- Receiver Skytec
- Receiver Medion
- Receiver Megasat
- Receiver Cambridge
- Receiver Tangent
- Receiver Cisco
- Receiver König
- Receiver Metronic
- Receiver TechniSat
- Receiver Meliconi
- Receiver Bose
- Receiver Geemarc
- Receiver Jabra
- Receiver Klipsch
- Receiver Alpine
- Receiver Salus
- Receiver Triax
- Receiver Tripp Lite
- Receiver Exibel
- Receiver Mercury
- Receiver Genie
- Receiver Goobay
- Receiver KEF
- Receiver Technics
- Receiver Summit Audio
- Receiver Jensen
- Receiver Alecto
- Receiver Icom
- Receiver Astro
- Receiver Plantronics
- Receiver Krüger&Matz
- Receiver Canal Digital
- Receiver Marmitek
- Receiver Zalman
- Receiver PreSonus
- Receiver Kopul
- Receiver Kathrein
- Receiver Sonos
- Receiver NAD
- Receiver Tascam
- Receiver Bogen
- Receiver Omnitronic
- Receiver Velleman
- Receiver Marshall
- Receiver Sonance
- Receiver Telestar
- Receiver Vivotek
- Receiver Zoom
- Receiver Bush
- Receiver JUNG
- Receiver Fostex
- Receiver MIPRO
- Receiver Dual
- Receiver Electro-Voice
- Receiver HQ Power
- Receiver Fredenstein
- Receiver RME
- Receiver Sagem
- Receiver Onkyo
- Receiver Focal
- Receiver Line 6
- Receiver HK Audio
- Receiver Teac
- Receiver GlobalSat
- Receiver Imperial
- Receiver Autotek
- Receiver Magnat
- Receiver Saramonic
- Receiver Thorens
- Receiver Marantz
- Receiver ELAC
- Receiver Hartke
- Receiver McIntosh
- Receiver Hertz
- Receiver American Audio
- Receiver ART
- Receiver Bluesound
- Receiver Yaesu
- Receiver Polk
- Receiver Monacor
- Receiver Samson
- Receiver Audizio
- Receiver Raymarine
- Receiver Sogo
- Receiver Rupert Neve Designs
- Receiver Chamberlain
- Receiver FiiO
- Receiver DBX
- Receiver Warm Audio
- Receiver Devolo
- Receiver Simrad
- Receiver Radial Engineering
- Receiver Galaxy Audio
- Receiver Renkforce
- Receiver Marshall Electronics
- Receiver Chord
- Receiver Alto
- Receiver Maxview
- Receiver Manhattan
- Receiver Aquatic AV
- Receiver Caliber
- Receiver Audiolab
- Receiver Deaf Bonce
- Receiver Music Hall
- Receiver APart
- Receiver LogiLink
- Receiver Brondi
- Receiver Kramer
- Receiver Rotel
- Receiver Metra
- Receiver QSC
- Receiver Black Lion Audio
- Receiver Naim
- Receiver Solid State Logic
- Receiver Citronic
- Receiver RDL
- Receiver NAV-TV
- Receiver TV Star
- Receiver Edision
- Receiver Clarion
- Receiver Sound Devices
- Receiver Wharfedale
- Receiver Universal Audio
- Receiver Valueline
- Receiver Fender
- Receiver TIC
- Receiver Vision
- Receiver Majestic
- Receiver Zgemma
- Receiver MuxLab
- Receiver Panduit
- Receiver Morel
- Receiver Cerwin-Vega
- Receiver Axis
- Receiver Mackie
- Receiver Avalon
- Receiver Wavtech
- Receiver Xantech
- Receiver Reloop
- Receiver Crest Audio
- Receiver Oculus VR
- Receiver Lindell Audio
- Receiver Audio Limited
- Receiver ATen
- Receiver Shure
- Receiver Sangean
- Receiver Power Dynamics
- Receiver Rockford Fosgate
- Receiver Grace Design
- Receiver Smart-AVI
- Receiver Martin Logan
- Receiver Dahua Technology
- Receiver Fosi Audio
- Receiver Terratec
- Receiver Vivolink
- Receiver Phoenix Gold
- Receiver Memphis Audio
- Receiver Vonyx
- Receiver Scosche
- Receiver Speco Technologies
- Receiver Reely
- Receiver Boss
- Receiver Ibanez
- Receiver Nexa
- Receiver Klark Teknik
- Receiver StarTech.com
- Receiver S.M.S.L
- Receiver FBT
- Receiver InLine
- Receiver Focusrite
- Receiver Blackstar
- Receiver Crestron
- Receiver DAP-Audio
- Receiver Revel
- Receiver SPL
- Receiver Ground Zero
- Receiver Vincent
- Receiver Lindy
- Receiver GoGen
- Receiver Kogan
- Receiver Arcam
- Receiver Russound
- Receiver Audison
- Receiver Crown
- Receiver AVMATRIX
- Receiver Kanto
- Receiver Elektrobock
- Receiver Rolls
- Receiver Cyrus
- Receiver Fusion
- Receiver Kemo
- Receiver Delta Dore
- Receiver Adastra
- Receiver Lectrosonics
- Receiver Audac
- Receiver JETI
- Receiver FSR
- Receiver CYP
- Receiver Atlas Sound
- Receiver AKG
- Receiver AEA
- Receiver AMX
- Receiver Homematic IP
- Receiver MXL
- Receiver August
- Receiver Xoro
- Receiver AudioControl
- Receiver Mooer
- Receiver Audiotec Fischer
- Receiver Bugera
- Receiver Audix
- Receiver Ibiza Sound
- Receiver Steren
- Receiver Ocean Matrix
- Receiver Comprehensive
- Receiver Orava
- Receiver Intelix
- Receiver Match
- Receiver Alfatron
- Receiver HiFi ROSE
- Receiver Classé
- Receiver Audioengine
- Receiver Musical Fidelity
- Receiver Advance Acoustic
- Receiver NuPrime
- Receiver REL Acoustics
- Receiver Artsound
- Receiver BZBGear
- Receiver Key Digital
- Receiver Ram Audio
- Receiver KanexPro
- Receiver Sonifex
- Receiver Gefen
- Receiver Cranborne Audio
- Receiver TV One
- Receiver Whirlwind
- Receiver Apantac
- Receiver Ferguson
- Receiver SRS
- Receiver Inovonics
- Receiver Blustream
- Receiver C2G
- Receiver WyreStorm
- Receiver Advance
- Receiver IFi Audio
- Receiver Cabasse
- Receiver DLS
- Receiver Ampeg
- Receiver Amplicom
- Receiver Amiko
- Receiver Palsonic
- Receiver Stinger
- Receiver Brigmton
- Receiver Sunstech
- Receiver Redline
- Receiver Marquant
- Receiver Matrox
- Receiver Mac Audio
- Receiver Denson
- Receiver Valcom
- Receiver Naxa
- Receiver Sherwood
- Receiver Zehnder
- Receiver Mx Onda
- Receiver Swissonic
- Receiver Iriver
- Receiver Lanzar
- Receiver Humax
- Receiver Pinnacle
- Receiver Graupner
- Receiver Integra
- Receiver Revox
- Receiver Comica
- Receiver Audient
- Receiver Hegel
- Receiver PAC
- Receiver Luxman
- Receiver Infinity
- Receiver Linn
- Receiver Monitor Audio
- Receiver Monoprice
- Receiver Aplic
- Receiver Axton
- Receiver Proel
- Receiver OSD Audio
- Receiver Mark Levinson
- Receiver Soundstream
- Receiver Block
- Receiver PSB
- Receiver Formuler
- Receiver SVS
- Receiver LTC
- Receiver JB Systems
- Receiver Dreambox
- Receiver HUMANTECHNIK
- Receiver SIIG
- Receiver PSSO
- Receiver Primare
- Receiver Kali Audio
- Receiver Wet Sounds
- Receiver Televés
- Receiver MTX Audio
- Receiver Astell&Kern
- Receiver Hughes & Kettner
- Receiver Manley
- Receiver MEE Audio
- Receiver Extron
- Receiver PureLink
- Receiver Ashly
- Receiver HEOS
- Receiver Legamaster
- Receiver Madison
- Receiver Leviton
- Receiver Ebode
- Receiver Medeli
- Receiver Palmer
- Receiver Vocopro
- Receiver Xtrend
- Receiver Helix
- Receiver Winegard
- Receiver Laney
- Receiver Devialet
- Receiver Xsarius
- Receiver EA
- Receiver Octagon
- Receiver GOgroove
- Receiver Avantree
- Receiver LYYT
- Receiver Antelope Audio
- Receiver CE Labs
- Receiver Pharos
- Receiver Accell
- Receiver Jolida
- Receiver Intertechno
- Receiver Shanling
- Receiver GigaBlue
- Receiver Black Hydra
- Receiver RetroSound
- Receiver Ecler
- Receiver Viscount
- Receiver Ashdown Engineering
- Receiver Synq
- Receiver Parasound
- Receiver Roswell
- Receiver Velodyne
- Receiver Epcom
- Receiver Sunfire
- Receiver Selfsat
- Receiver Skytronic
- Receiver Topp Pro
- Receiver Whistler
- Receiver ESX
- Receiver Karma
- Receiver Dimavery
- Receiver AMS Neve
- Receiver Powersoft
- Receiver LinksPoint
- Receiver Lotronic
- Receiver Esoteric
- Receiver Markbass
- Receiver IMG Stage Line
- Receiver Wireless Solution
- Receiver Aurel
- Receiver NUVO
- Receiver Phoenix Audio
- Receiver AVPro Edge
- Receiver Comtek
- Receiver Fishman
- Receiver Pyramid
- Receiver LEA
- Receiver Sound Ordnance
- Receiver Canyon
- Receiver FiveO
- Receiver Planet Audio
- Receiver SureCall
- Receiver Lyngdorf
- Receiver FoneStar
- Receiver Phonic
- Receiver Koda
- Receiver Atlona
- Receiver Trace Elliot
- Receiver Bang Olufsen
- Receiver JTS
- Receiver AER
- Receiver Dynavox
- Receiver Modelcraft
- Receiver Fontastic
- Receiver Simaudio
- Receiver Niles
- Receiver Knoll
- Receiver Creek
- Receiver Mobile Crossing
- Receiver The T.amp
- Receiver DAP
- Receiver Krell
- Receiver Edwards Signaling
- Receiver ANKARO
- Receiver A-NeuVideo
- Receiver Bellari
- Receiver CAD Audio
- Receiver Polsen
- Receiver Triangle
- Receiver Lab Gruppen
- Receiver AmpliVox
- Receiver Audiofrog
- Receiver CyberData Systems
- Receiver Williams Sound
- Receiver Glemm
- Receiver WesAudio
- Receiver AudioSource
- Receiver Stewart
- Receiver Leema
- Receiver Axing
- Receiver Seco-Larm
- Receiver Camille Bauer
- Receiver Mosconi
- Receiver Crest
- Receiver TechLogix Networx
- Receiver Meridian
- Receiver Quad
- Receiver BC Acoustique
- Receiver Gold Note
- Receiver IOTAVX
- Receiver Shinybow
- Receiver Rexing
- Receiver Inter-M
- Receiver Sinus Live
- Receiver Soundtrack
- Receiver Canor
- Receiver Unison Research
- Receiver Universal Remote Control
- Receiver BMB
- Receiver Inateck
- Receiver Cloud
- Receiver Datapath
- Receiver PTN-electronics
- Receiver Clare Controls
- Receiver Loxjie
- Receiver Cayin
- Receiver Technical Pro
- Receiver VMV
- Receiver CSL
- Receiver Line Magnetic
Nyeste Receiver Manualer
13 Oktober 2024
11 Oktober 2024
11 Oktober 2024
11 Oktober 2024
10 Oktober 2024
10 Oktober 2024
10 Oktober 2024
10 Oktober 2024
9 Oktober 2024
6 Oktober 2024