Kathrein VOS 43/RA-1G2 Manual

Kathrein Modtager VOS 43/RA-1G2

Læs nedenfor 📖 manual på dansk for Kathrein VOS 43/RA-1G2 (4 sider) i kategorien Modtager. Denne guide var nyttig for 15 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/4
1 / 4
VOS 43/RA-1G2 209500001
House connection amplifi er
Basic safety precautions
House connection amplifi er for modern HFC networks up to
1,2 GHz
Integrated high-effi ciency switched-mode power supply unit
Power management: Unused amplifi er stage switch-off for
reduced power consumption
Die-cast housing with F-type connectors
Variable 6 dB interstage gain setting using on-board plug-in
attenuators (delivery condition: higher gain)
The maximum operational levels also apply for operation with
interstage attenuation
Interstage equaliser switchable with bridging plugs
(6 dB pre-emphasis)
Integrated return path 5 – 204 MHz active/passive, off
(switchable with bridging plugs)
Built-in variable attenuators (delivery condition return path:
max. attenuation) and variable equaliser
LED to indicate operational mode
Test socket on output -20 dB (with directional coupler)
Test socket on input -20 dB (Return path 5 – 204 MHz)
Test sockets are terminated with the EMK 03 in the delivery
status
For indoor installation
Conform to: EN 60728-11, EN 50083-2 und EN 32368-1
The amplifi ers comply with the EMC directive 2014/30/EU and
Low-Voltage Directive 2014/35/EU applicable at the time of
shipping
Installation must be carried out by authorised specialist staff .
Unplug from the mains before installation.
Described amplifi ers are exclusively for installation of HFC networks up to 1218 MHz.
Any other use or failure to comply with these instructions will void the warranty or guarantee.
The amplifi ers may only be installed in dry areas indoors. Do not install on or against highly combustible materials.
The amplifi ers must be earthed when installed (Cu, minimally 4 mm2).
The safety regulations set out in the current EN 60728-11 und EN 62368-1 standards must be complied with.
The supply voltage of the amplifi ers is 230 VAC which can be fatal if touched directly!
The only reliable method of disconnecting the amplifi ers from the mains is to unplug them.
Do not touch live parts.
The power plug must be easy to operate as the means of cutting power to the amplifi er, so the wall outlet must be
close to the amplifi er and easily accessible.
The amplifi ers may only be installed and deinstalled in the voltage-free condition.
Do not operate the amplifi ers without the factory- tted protective cover over the power supply unit. The cover must
be closed.
No liquid-fi lled items may be placed on top of the amplifi ers.
The amplifi ers are not to be exposed to dripping or splashing water.
Ambient temperature range -20 bis +55 °C.
Merkmale


Produkt Specifikationer

Mærke: Kathrein
Kategori: Modtager
Model: VOS 43/RA-1G2

Har du brug for hjælp?

Hvis du har brug for hjælp til Kathrein VOS 43/RA-1G2 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Modtager Kathrein Manualer

Modtager Manualer

Nyeste Modtager Manualer

DAP-Audio

DAP-Audio TA-4.3400 Manual

21 December 2024
JBL

JBL Power P7520 Manual

20 December 2024
JBL

JBL Power P-2510 Manual

20 December 2024
Devialet

Devialet Astra Dual Manual

19 December 2024
Devialet

Devialet Astra Manual

19 December 2024
QSC

QSC PL236 Manual

19 December 2024
QSC

QSC PL218 Manual

19 December 2024
QSC

QSC PL224 Manual

19 December 2024
QSC

QSC PL230 Manual

19 December 2024