Kathrein ZAS 41XS Manual


Læs nedenfor 📖 manual på dansk for Kathrein ZAS 41XS (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 7 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
1 / 2
ZAS 40XS 214500011
ZAS 40XL 214500012
ZAS 41XS 214500013
ZAS 41XL 214500014
Rafter fasteners for the sat antennas CAS 06/60/80/90 and KEA 650/750/850/1000
About this guide
This document is part of the product.
Do not install or use the device until you have read and understood
this document.
Perform all operating steps described in this manual in the specifi ed
sequence.
Keep this document for reference throughout the service life of the
device. Pass this document on to any new owner or user.
For the most up-to-date version of this document, go to
www.kathrein-ds.com.
Features
ZAS 40XS/ZAS 40XL for one sat antenna
ZAS 41
XS/ZAS 41XL for one sat antenna
and an additional radio
antenna
Mounting directly from the outside or through the battens onto the
rafter
Flexibly adjustable to the gaps between the rafters by means of a
telescopic tube
Continuously adjustable for any roof slope (limited only by the cover
plate)
Hot-dip galvanised
Cable is inserted through mast tip by means of the ZTC 08 (included
in the scope of delivery of the ZTS40/ZTS 41ro/ZTS 41sw)
Designed to withstand lightning current (100kA, 10/350 µs according
to DIN VDE 0855-300)
The ZAS 40XS, ZAS 40XL, ZAS 41XS und ZAS 41XL are rafter fasteners for mounting parabolic antennas with a diameter of up to Ø100cm on the roof.
Any other use, or failure to comply with these instructions or documentation and instructions enclosed with the devices, will result in voiding of
warranty or guarantee.
Intended use
Technical data
Type Einheit ZAS40XS ZAS41XS ZAS 40XL ZAS 41XL
Order no. 214500011 214500013 214500012 214500014
Length mm 900 1300 900 1300
Diameter mm 48
Gaps between rafters mm 390 – 520 870 – 1100
Roof slope ° 0–90
Rafter frame dimensions mm 390 – 520x148x40 870 – 1100x148x40
Suitable for sat antennas CAS06/CAS60/CAS80/CAS90, KEA 650/750/850/1000
Suitable mounting accessories see „Mounting sets ZTS40/ZTS 41ro/ZTS 41sw“ on page 1
Packing unit mm 980 x 200 x 115 1380 x 200 x 115 980 x 200 x 115 1380 x 200 x 115
Perm. bending moment Nm 700
Packing unit/weight, approx. pc./kg 1/5,7 1/6,6 1/7,1 1/8,0
Scope of delivery
Rafter fastener
6wood screws 10x100mm
Earthing terminal
Mast cover
4 nuts M10
Fastening screw M10 x 20
User manual
Mounting sets ZTS40/ZTS 41ro/ZTS 41sw
For securing the rafter fasteners ZAS 4x
Consists of:
ZTB 61: Lead cover plate (410 x 410 mm)
ZTB 60ro/ZTB 60sw: Aluminium cover plate (500 x 450 mm)
ZTC 08: Mast cap for insertion of eight or ten cables
ZTC 48: Cover collar (ø 48mm)
900 mm (ZAS 40XS/ZAS 40XL)
1300 mm (ZAS 41XS/ZAS 41XL)
390 – 520 mm (ZAS 40XS/ZAS 41XS)
870 – 1100 mm (ZAS 40XL/ZAS 41XL)
∅ 48 mm
The items in the sets are
also available individually.
Please fi nd further moun-
ting accessories under
www.kathrein-ds.com


Produkt Specifikationer

Mærke: Kathrein
Kategori: Ikke kategoriseret
Model: ZAS 41XS

Har du brug for hjælp?

Hvis du har brug for hjælp til Kathrein ZAS 41XS stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Kathrein Manualer

Kathrein

Kathrein UFO 83 Manual

28 September 2024
Kathrein

Kathrein UFO 80 Manual

19 September 2024
Kathrein

Kathrein ZAS 41XS Manual

10 September 2024
Kathrein

Kathrein UFOpro Manual

28 August 2024
Kathrein

Kathrein FRP 100 Manual

14 August 2024
Kathrein

Kathrein MS 6060 Manual

13 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer