Kenmore 795.51869 Manual

Kenmore Køle-fryse-kombinationer 795.51869

Læs nedenfor 📖 manual på dansk for Kenmore 795.51869 (44 sider) i kategorien Køle-fryse-kombinationer. Denne guide var nyttig for 30 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/44
Use & Care Guide
Manual de Uso y Cuidado
795.5186*
Side-by-Side Refrigerator
Refrigerador de Dos Puertas
*= color number, número de color
P/N MFL63288307-1
Sears Brands Management Corporation
www.kenmore.com
Sears Canada Inc.
Toronto, Ontario, Canada M5B 2C3
www.sears.ca
English / Español
®
795.5185*,Models/Modelos:
+RçPDQ(VWDWHV,/86$
www.sears.com
2
TABLE OF CONTENTS
Warranty............................................................................. 3
Protection Agreements .............................................. 4
Important Safety Instructions ................................ 5
Electrical & Grounding Requirements ..............7
Parts and Features ....................................................... 8
Refrigerator Installation ..............................9-14
Unpacking the Refrigerator .............................9
Installation .................................................................... 10
Removing/Replacing Your Refrigerator and
Freezer Handles and Doors ...........................11-13
Leveling and Door Alignment ......................14
Using Your Refrigerator .................................. 15
Setting the Controls ....................................... 15
Control Panel Features ............................................15
Automatic Icemaker......................................17
Food Storage Guide .....................................19
Refrigerator Section
Water and Ice Dispenser ............................. 20
Refrigerator/Freezer Door Bins.................... 21
Refrigerator Drawers and Cover .................. 21
Refrigerator/Freezer Shelves .............................22
GRAB-N-GO ..................................................23
Freezer Section
Ice Storage Bin .............................................. 24
Water Filter ..................................................... 25
Care And Cleaning ......................................... 29
Outside ........................................................... 29
Inside Walls ................................................... 29
Door Liner And Gaskets ............................... 29
Plastic Parts .................................................... 29
Condenser Coils ............................................. 29
LED Light Replacement ................................ 30
Power Interruptions ....................................... 30
When You Go On Vacation ........................ 30
When You Move ............................................ 30
Connecting the Water Line ............................ 31
Troubleshooting Guide ................................... 34
Diagnostics
........................................................42
Service ....................................... Back Cover
TM
3
WARRANTY
REFRIGERATOR WARRANTY
KENMORE ELITE LIMITED WARRANTY
vFOR ONE YEAR from the date of sale this appliance is warranted against defects in material or workmanship. A
vFOR FIVE YEARS from the date of sale, the sealed refrigerant system of this appliance is warranted against defects
vFOR TEN YEARS from the date of sale, the linear compressor of this appliance is warranted against defects in
This warranty covers ONLY defects in material and workmanship, and will NOT pay for:
1. Expendable items that can wear out from normal use, inclXGLQJEXWQRWOLPLWHGWRoOWHUVEHOWVEDJVRUVFUHZLQEDVH
2.
3.
4.
5.
6.
7.
Customer’s sole and exclusive remedy under this limited warranty shall be product repair or replacement as
This warranty applies only while this appliance is used in the United States or Canada*.
7KLVZDUUDQW\JLYHV\RXVSHFLoFOHJDOULJKWVDQG\RXPD\Dlso have other rights which vary from state to state.
* ographical areas, nor will this warranty cover user or servicer,QKRPHUHSDLUVHUYLFHLVQRWDYDLODEOHLQDOO&DQDGLDQJH
Sears Brands Management Corporation, Hoç man Estates, IL 60179
Sears Canada Inc., Toronto, Ontario, Canada M5B 2C3
®
WITH PROOF OF SALE, the following warranty coverage applies when this appliance is correctly installed, operated
and maintained according to all supplied instructions.
Disclaimer of implied waranties; limitation of remedies
defective appliance will receive free repair or replacement at option of seller. This warranty coverage applies for
only 90 days from the sale date in the United States, and is void in Canada, if the appliance is ever used for other
than private household purposes.
in material or workmanship. If a system part is defective wiWKLQWKHoUVW\HDUDQHZSDUWZLOOEHVXSSOLHGDQGLQVWDOOHG
DWQRFKDUJH,IDV\VWHPSDUWLVGHIHFWLYHDIWHUWKHoUVWyear, a new part will be supplied but not installed at no
charge. You are responsible for the labor cost of part instDOODWLRQDIWHUWKHoUVW\HDUIURPWKHGDWHRIVDOH7KLV
warranty coverage applies for only one year from the sale date in the United States, and is void in Canada, if the
appliance is ever used for other than private household purposes.
material or workmanship. If the compressor is defective wiWKLQWKHoUVW\HDUDQHZRQHZLOOEHVXSSOLHGDQGLQVWDOOHG
DWQRFKDUJH,IWKHFRPSUHVVRULVGHIHFWLYHDIWHUWKHoUVW year, a new one will be supplied but not installed at no
charge. You are responsible for the labor cost of part instDOODWLRQDIWHUWKHoUVW\HDUIURPWKHGDWHRIVDOH7KLV
warranty coverage applies for only two years from the sale date in the United States, and is void in Canada, if the
appliance is ever used for other than private household purposes.
light bulbs.
A service technician to clean or maintain this appliance, or to instruct the user in correct appliance installation,
operation and maintenance.
Service calls to correct appliance installation not performed by Sears authorized service agents, or to repair problems
with house fuses, circuit breakers, house wiring, and plumbing or gas supply systems resulting from such installation.
Damage to or failure of this appliance resulting from installation not performed by Sears authorized service agents,
including installation that was not in accord with electrical, gas or plumbing codes.
Damage to or failure of this appliance, including discoloration or surface rust, if it is not correctly operated and
maintained according to all supplied instructions.
Damage to or failure of this appliance, including discoloration or surface rust, resulting from accident, alteration,
abuse, misuse or use for other than its intended purpose.
Damage to or failure of this appliance, including discoloration or surface rust, caused by the use of detergents,
cleaners, chemicals or utensils other than those recommended in all instructions supplied with the product.
8. Damage to or failure of parts or systems resulting from unaXWKRUL]HGPRGLoFDWLRQVPDGHWRWKLVDSSOLDQFH
9. Service to an appliance if the model and serial plate is missing, altered, or cannot easily be determined to have the
DSSURSULDWHFHUWLoFDWLRQORJR
SURYLGHGKHUHLQ,PSOLHGZDUUDQWLHVLQFOXGLQJZDUUDQWLHVRIPHUFKDQWDELOLW\RUoWQHVVIRUDSDUWLFXODUSXUSRVHDUH
OLPLWHGWRRQH\HDURQWKHDSSOLDQFHoYH\HDUVRQWKHVHDOHGV\VWHPDQGWHQ\HDUVRQWKHOLQHDUFRPSUHVVRURU
the shortest period allowed by law. Seller shall not be liable for incidental or consequential damages. Some states
and provinces do not allow the exclusion or limitation of incidental or consequential damages, or limitation on the
GXUDWLRQRILPSOLHGZDUUDQWLHVRIPHUFKDQWDELOLW\RUoWQHVVVRWKHVHH[FOXVLRQVRUOLPLWDWLRQVPD\QRWDSSO\WR\RX
travel and transportation expenses if this product is locatedLQDUHPRWHDUHDDVGHoQHGE\6HDUV&DQDGD,QFZKHUH
an authorized servicer is not available.
For warranty coverage details to obtain free repair or replacement, visit the web page: www.kenmore.com/warranty
4
PROTECTION AGREEMENTS
PRODUCT RECORD
Master Protection Agreements
Congratulations on making a smart purchase. Your new
Kenmore Elite product is designed and manufactured
®
for years of dependable operation. But like all products,
it may require preventive maintenance or repair from
time to time. That’s when having a Master Protection
Agreement can save you money and aggravation.
The Master Protection Agreement also helps extend
the life of your new product. Here’s what the
Agreement* includes:
•Parts and labor not just for repairing defects, but to help
keep products operating properly under normal use.
Our coverage goes well beyond the product warranty.
No deductibles, no functional failure excluded from
coverage— real protection.
• by experienced service techniciansExpert service
trusted in millions of homes every year.
•Unlimited service calls and nationwide service, as
often as you want us, whenever you want us.
•“No-lemon” guarantee – replacement of your covered
product after three separate product failures occur
within twelve months and a fourth repair is required.
•Product replacement if your covered product can’t be
xed.
•Annual Preventive Maintenance Check at your request
– no extra charge.
•Fast help by phone ecivres a morf troppus enohp –
agent on all products to help troubleshoot problems.
Think of us as a “talking owner’s manual.”
•Power surge protection against electrical damage due
uctuations.
•$300 Food Loss Protection for any food spoilage that
is the result of mechanical failure of any covered
refrigerator or freezer.
•Service Promise: $50 LIoUVWDWWHPSWUHSDLURI\RXU
covered product can’t be accomplished and product is
•GLVFRXQWRç the regular price of any non-covered
repair service and related installed parts.
Once you purchase the Agreement, a simple phone call
is all that it takes for you to schedule service. You can call
anytime day or night.
The Master Protection Agreement is a risk free purchase.
If you cancel for any reason during the product warranty
period, we will provide a full refund or a prorated refund
anytime after the product warranty period expires.
Purchase your Master Protection Agreement today!
Some limitations and exclusions apply.
For prices and additional information in the
U.S.A. call 1-800-827-6655.
* Coverage in Canada varies on some items. For full
details call Sears Canada at 1-800-361-6665.
Sears Installation Service
For Sears professional installation of home appliances,
garage door openers, water heaters, and other major
home items, in the U.S.A. call 1-844-553-6667, and in
Canada call 1-800-469-4663.
nd the model and
cation label located on the interior liner of the refrigerator compartment. Have these
items of information available whenever you contact Sears concerning your product.
Model No.___________________ Date of Purchase ___________________
Serial No.___________________
Save these instructions and attach your sales receipt for future reference.
Includes free delivery and installation, if necessary, of
replacement product.
not usable while awaiting further repair service.
5
IMPORTANT SAFETY INSTRUCTIONS
WARNING
SAVE THESE INSTRUCTIONS
To reduce the risk of  re, electric shock, or personal
injury when using your product, basic safety precautions
should be followed, including the following.
Read all instructions before using this appliance.
• NEVER unplug your refrigerator by pulling on the
power cord. Always grip the plug  rmly and pull it
straight out from the outlet.
• Immediately repair or replace all power cords that
have become frayed or otherwise damaged. Do not
use a cord that shows cracks or abrasion damage
along its length or at either the plug or connector end.
• Do not modify or extend the power cord length. It
could cause electric shock or  re.
• When moving your refrigerator away from the wall, be
careful not to roll over or damage the power cord.
• The insulation in this unit contains cyclopentane or a
pentane-like gas which is  ammable and requires a
special elimination process. Before discontinuing use of
this refrigerator, contact local authorities to arrange for
safe disposal of the unit.
BASIC SAFETY PRECAUTIONS
This guide contains many important safety messages. Always read and obey all safety messages.
This is the safety alert symbol. It alerts you to safety messages that inform you of hazards that can kill
or hurt you or others, or cause damage to the product.
All safety messages will be preceded by the safety alert symbol and the hazard
signal word DANGER, WARNING or CAUTION. These words mean:
You be killed or seriously injured if you do not follow instructions.will
You be killed or seriously injured if you do not follow instructions.can
Indicates an imminently hazardous situation which, if not avoided,
may result in minor or moderate injury, or product damage.
All safety messages will identify the hazard, tell you how to reduce the chance of injury, and tell you what can happen
if the instructions are not followed.
• DO NOT store or use gasoline or other  ammable
vapors and liquids in the vicinity of this or any other
appliance.
• DO NOT store explosive substances such as aerosol
cans containing  ammable propellants in this
appliance.
• DO NOT allow children to climb, stand, or hang on the
refrigerator doors or shelves in the refrigerator. They
could damage the refrigerator and seriously injure
themselves.
• Keep ngers out of pinch point areas; clearances
between the doors and cabinets are necessarily small.
Be careful closing doors when children are in the area.
• Unplug your refrigerator before cleaning or making
any repairs.
NOTE: It is strongly recommended that any service be
performed by a quali ed technician.
DANGER
WARNING
CAUTION
6
WARNING
DANGER: RISK OF CHILD ENTRAPMENT
SAVE THESE INSTRUCTIONS
• Before service is performed on the interior LED lighting,
unplug the refrigerator or turn o power at the circuit
breaker or fuse box.
NOTE: The refrigerator and freezer compartment
lights are LED interior lighting, and service should be
performed by a quali ed technician.
WARNING: Setting either or both controls to the OFF
position does not remove power to the light circuit.
• When you are  nished, reconnect the refrigerator to
the electrical source and reset the controls (Thermostat,
Refrigerator Control, and or Freezer Control, depending
on the model) to the desired setting.
• This refrigerator must be properly installed in
accordance with the Attention Installer Instructions that
were taped to the front of the refrigerator.
• After your refrigerator is in operation, do not touch the
cold surfaces in the freezer compartment when hands
are damp or wet. Skin may adhere to the extremely cold
surfaces.
Junked or abandoned refrigerators are dangerous, even
if they are sitting for only a few days. If you are getting
rid of your old refrigerator, please follow the instructions
at right to help prevent accidents (child entrapment and
su ocation).
• DO NOT touch the automatic ice making mechanism
while the refrigerator is plugged in.
• DO NOT refreeze frozen foods which have thawed
completely. The United States Department of
Agriculture in Home and Garden Bulletin No. 69 says:
…You may safely refreeze frozen foods that have
thawed if they still contain ice crystals or if they are
still cold—below 4°C.
…Thawed ground meats, poultry or  sh that have any
o -odor or o -color should not be refrozen and should
not be eaten. Thawed ice cream should be discarded.
If the odor or color of any food is poor or questionable,
dispose of it. The food may be dangerous to eat.
Even partial thawing and refreezing reduces the
eating quality of foods, particularly fruits, vegetables
and prepared foods. The eating quality of red meats
is a ected less than that of many other foods. Use
refrozen foods as soon as possible to save as much of
their quality as you can.
WARNING: This product contains chemicals known to
the State of California to cause cancer and birth defects
or other reproductive harm. Wash hands after handling.
BEFORE YOU THROW AWAY
YOUR OLD REFRIGERATOR
OR FREEZER:
• Take o the doors.
• Leave the shelves in place so that
children may not easily climb inside.
CAUTION
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do not
play with the appliance.
7
CFC/HCFC DISPOSAL
ELECTRICAL & GROUNDING REQUIREMENTS
WARNING
Your old refrigerator may have a cooling system
that used CFCs or HCFCs (chloro uorocarbons or
hydrochloro uorocarbons). CFCs and HCFCs are
believed to harm stratospheric ozone if released to the
atmosphere. Other refrigerants may also cause harm to
the environment if released to the atmosphere.
IMPORTANT: Please read carefully.
TO CONNECT ELECTRICITY
RECOMMENDED GROUNDING METHOD
The refrigerator should always be plugged into its own
individual properly grounded electrical outlet rated for 115
Volts, 60 Hz, AC only, and fused at 15 amperes (minimum).
This provides the best performance and also prevents
overloading house wiring circuits which could cause a re
hazard from overheated wires. It is recommended that a
separate circuit serving only this appliance be provided.
Use a receptacle that cannot be turned o with a switch
or pull chain. Do not use an extension cord.
Where a standard two-prong wall outlet is encountered,
it is your personal responsibility and obligation to have
it replaced with a properly grounded three-prong wall
outlet.
Electrical Shock Hazard
FOR PERSONAL SAFETY, this appliance must be
properly grounded. Have the wall outlet and the circuit
checked by a quali ed electrician to make sure the
outlet is properly grounded.
If you are throwing away your old refrigerator, make
sure the refrigerant is removed for proper disposal
by a quali ed technician. If you intentionally release
refrigerant, you may be subject to  nes and imprisonment
under provisions of environmental legislation.
USE OF EXTENSION CORDS
WARNING: Do not use extension cords or ungrounded
(two-prong) adaptors. Because of potential safety
hazards under certain conditions, the use of an extension
cord is not recommended. However, if you still elect to
use an extension cord, it is absolutely necessary that it
be a UL-listed (USA), 3-wire grounding type appliance
extension cord having a grounding type plug and outlet,
and that the electrical rating of the cord be 15 amperes
(minimum) and 120 volts.
Use of an extension cord will increase the clearance
needed for the back of the refrigerator.
• Do not bend the power cord excessively or place heavy
articles on it.
• Connect the power plug in the proper position with the
cord hanging down.
• When moving the refrigerator, be careful not to roll
over or damage the power cord.
• If the power cord is damaged, have it replaced
immediately by the manufacturer or its service agent.
• Do not insert the power plug with wet hands.
• Do not insert your hands into the area under the
bottom of the appliance.
• Make sure that the power plug is not squashed or
damaged by the back of the refrigerator.
3-prong
grounding
plug
3-prong
grounding type
wall receptacle
Ensure proper
ground exists
before use.
CAUTION
WARNING
Replacing Electrical Cord
To avoid hazard, damaged power cords must be
replaced by the manufacturer or its service agent or
a similarly quali ed technician. Do not operate the
appliance with a damaged power cord.
8
PARTS AND FEATURES
Automatic Icem aker
Freezer Light (LED)
Freezer Shelves
Freezer Door Bins
Freezer Drawers
Refrigerator Light (LED)
Water Filter
Refrigerator Shelves
GRAB-N-GO
Refrigerator Drawers
Refrigerator Door Bins
A
G
B
H
C
I
D
J
E
F
Use this page to become more familiar with the parts and features of the refrigerator.
NOTE: eren t m odels. The refrigerator you have purchased m ay have som e or all of the item s
listed below. The locations of the features shown below m ay not m atch your m odel.
A
B
C
D
D
E
J
G
K
I
K
B
A
C
D
D
E
G
F
K
K
K
K
H
H
J
F
H
TM
9
REFRIGERATOR INSTALLATION
WARNING WARNING
WARNING
UNPACKING REFRIGERATOR THE
Remove tape and any temporary labels from the
refrigerator before using. Do not remove any labels,
the model and serial number label, or the Tech Sheet
that is located under the front of the refrigerator,
behind the base grille.
To remove any remaining tape or glue, rub the area
briskly with your thumb. Tape or glue residue can also be
easily removed by rubbing a small amount of liquid dish
ngers. Wipe with warm
water and dry.
ammable
uids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of the refrigerator.
Refrigerator shelves are installed in the shipping position.
Please reinstall shelves according to your individual
storage needs.
NOTE:
This appliance is intended to be used in household and
similar applications such as:
ces and other working
environments
• farm houses and by clients in hotels, motels and other
residential environments
• bed and breakfast environments
• catering and similar non-retail applications.
This product is not to be used for special purposes such
as the storage of medicine or test materials, or for use
on ships, etc.
Excessive Weight Hazard:
Use two or more people to move and install the
refrigerator. Failure to do so can result in back or
other injury.
Excessive Weight Hazard:
The refrigerator is heavy. When moving the refrigerator
for cleaning or service, be sure to protect WKHpoor.
Always pull the refrigerator straight out when moving it.
Do not wiggle or walk the refrigerator when trying to
oor damage could occur.
Explosion Hazard:
ammable materials and vapors, such as
gasoline, away from the refrigerator. Failure to do so
re, explosion, or death.
10
3. Select a place where a water supply can be easily
connected for the automatic icemaker.
NOTE: The water pressure must be between 20 and
120 psi ( 138 – 827 kPa )on models without a water
4. Too small of a distance from adjacent items may
result in lowered freezing capability and increased
electricity consumption charges. Allow at least 24
inches (61 cm) in front of the refrigerator to open the
doors.
INSTALLATION
The refrigerator should always be plugged into its own
individual properly grounded electrical outlet rated for 115
Volts, 60 Hz, AC only, and fused at 15 amperes (minimum).
This provides the best performance and also prevents
overloading house wiring circuits which could cause a
hazard from overheated wires. It is recommended that a
separate circuit serving only this appliance be provided.
1. To avoid noise and vibration, the unit must be
leveled and installed on a solidly constructed poor. If
required, adjust the leveling legs to compensate for
unevenness of the
higher than the rear to aid in door closing. Leveling
legs can be turned easily by tipping the cabinet
slightly. Turn the leveling legs counterclockwise to raise
the unit or clockwise to lower it. (See LEVELING AND
DOOR ALIGNMENT.)
NOTE: Installing on carpeting, soft tile surfaces,
a platform or weakly supported structure is not
recommended.
2. Install this appliance in an area where the temperature
is between 55°F (13°C) and 110°F (43°C). If the
temperature around the appliance is too low or high,
ected.
REFRIGERATOR INSTALLATION
Shock Hazard:
To reduce the risk of electric shock, do not install the
refrigerator in a wet or damp area.
WARNING
2” (5.08 cm) 2” (5.08 cm) 2” (5.08 cm)
2” (5.08 cm)
WARNING
Be careful when you work with the hinge, stopper, etc.
You may be injured.
To avoid risk of injury or electrical shock, do not put
hands or metal objects into the air vents or bottom
opening of the refrigerator.
11
NOTE: Removing the doors is the recommended procedure when it is necessary to move the refrigerator through a
narrow opening. If it is necessary to remove the handles, follow the directions below.
REFRIGERATOR INSTALLATION
HOW TO REMOVE REFRIGERATOR
DOOR HANDLE
NOTE: Handle appearance may vary from the
illustrations on this page.
Removing Refrigerator Handle
Loosen the set screws with a / in. (2.5 mm)
Allen wrench and remove the handle.
NOTE: If the handle mounting fasteners need
to be tightened or removed, use a ¼ in. (6.4
mm) Allen wrench.
HOW TO REPLACE REFRIGERATOR
DOOR HANDLE
NOTE: Handle appearance may vary from the
illustrations on this page.
Replacing Refrigerator Door Handle
Place the handle on the door by  tting
the handle footprints over the mounting
fasteners and tightening the set screws
with a / in (2.5 cm) Allen wrench.
NOTE: If the handle mounting fasteners
need to be tightened or removed, use a
¼ in. (6.4 mm) Allen wrench.
Mounting
fasteners
Set screw
Allen wrench
Mounting
Fasteners
12
WARNING
Electrical Shock Hazard
• Disconnect the electrical supply to the refrigerator
before installing. Failure to do so could result in
serious injury or death.
• Do not put hands, feet or other objects into the air
vents or bottom of the refrigerator. You may be
injured or receive an electrical shock.
REMOVING AND REPLACING
REFRIGERATOR DOORS
WARNING
Excessive Weight Hazard:
Use two or more people to remove and install the
refrigerator doors. Failure to do so can result in back or
other injury.
REFRIGERATOR INSTALLATION
Removing the left (freezer) door with water line connection
Pull up the water feed tube while pressing the collet down
gure below.
NOTE: If a tube end is deformed or abraded, trim the
part away. Disconnecting the tube under the door causes
ow out. Put a
large container at the end of the tube to prevent water
oor.
Figure 1
NOTE: Water hoses should be cut with a clean, straight
edge to avoid leaks.
Not Straight Damaged Stretched
wire
harness
hinge
cover
upper
hinge
1. Open the door. Remove the top hinge cover screw.
at blade screwdriver to pry back the hooks
(not shown) of the hinge cover from the top of the
refrigerator cabinet. Lift up the cover.
3. Disconnect all the wire harnesses.
4. Rotate the hinge lever counterclockwise (1). Lift the
upper hinge free of the hinge lever latch (2).
hinge lever upper hinge
CAUTION: When lifting the hinge free of the latch,
be careful that the door does not fall forward.
5. Lift the door from the lower hinge pin, being careful
to pull the water lines through the lower hinge pin.
lower hinge
Enough for
the water feed tube
to be completely
pulled out
6. Place the door, inside facing up, on a non-scratching
surface. Be careful not to damage the water feed
tube.
13
REFRIGERATOR INSTALLATION
Removing the right (refrigerator) door
wire
harness
1. Open the door. Remove the top hinge cover screw.
2. Use a at blade screwdriver to pry back the hooks
(not shown) of the hinge cover from the top of the
refrigerator cabinet. Lift up the cover. Disconnect all
wire harnesses.
hinge lever
upper
hinge
3. Rotate the hinge lever clockwise (1). Lift the top hinge
free of the hinge lever latch (2).
: When lifting the hinge free of the latch, CAUTION
be careful that the door does not fall forward.
4. Lift the door from the lower hinge pin.
lower hinge
5. Place the door, inside facing up, on a non-scratching
surface.
Reinstalling the right (refrigerator) door
1. Place the door onto the lower hinge pin.
2. Fit the upper hinge over the hinge lever latch and
into place. Rotate the lever counterclockwise to
secure the hinge.
3. Reconnect all wire harnesses. Hook the tab on the
switch side of the cover under the edge of the wire
opening in the cabinet top. Position the cover into
place. Insert and tighten the cover screw.
Reinstalling the left (freezer) door
1. Feed the water tubes through the lower hinge pin
and place the door onto the lower hinge pin. Water
hoses should be behind the leg to prevent damage.
2. Fit top hinge over the hinge lever latch and into
place. Rotate the lever clockwise to secure the hinge.
3. Connect all the wire harnesses.
4. Hook the tab on the door switch side of the cover
under the edge of the wire opening in the cabinet
top. Position the cover into place. Insert and tighten
the cover screw.
5. Reconnect the water tubes by inserting the tubes into
the connectors. The tube is inserted correctly when
only one guide line is showing out of two.
Insert Line
Tube
Collet
14
REFRIGERATOR INSTALLATION
Left leveling
leg Height
Height
dierence
dierence
PRES S & HO L D
CHA NGE FILTER
C
F
C
F
Right leveling leg
Height
dierence
Height
dierence
PRES S & HO L D
CHA NGE FILTER
C
F
C
F
Height
dierence
Height
dierence
PRESS & H O LD
CHA NGE FILTER
C
F
C
F
Up
Down
1 keeper nut
2 Adjustment
hinge pin
3 Tool for
adjustment
LEVELING
After installing, plug the refrigerator’s power cord into a
3-prong grounded outlet and push the refrigerator into the
onal position.
Your refrigerator has two front leveling legs—one on the
right and one on the left. Adjust the legs to alter the tilt
from front-to-back or side-to-side. If your refrigerator
seems unsteady, or you want the doors to close more
easily, adjust the refrigerator’s tilt using the instructions
below:
NOTE: Tools Required: / ” (18mm) wrHQFKRUp at blade
screwdriver.
1. Turn the leveling leg counterclockwise to raise that side
of the refrigerator or clockwise to lower it. It may take
several turns of the leveling leg to adjust the tilt of the
refrigerator.
NOTE: Having someone push backward against the top of
of the leveling legs.
This makes it easier to adjust the legs.
2. Open both doors again and check to make sure that
they close easily. If the doors do not close easily, tilt
the refrigerator slightly more to the rear by turning
both leveling legs counterclockwise. It may take
several more turns, and you should turn both leveling
legs the same amount.
DOOR ALIGNMENT
If the doors are still uneven after the refrigerator has
been leveleGo nish adjusting the doors by following the
instructions below.
Adjusting tools: 5/16” (8mm) wrench and 3/4” (19mm)
wrench
Using a 3/4” (19mm) wrench, turn the keeper nut
clockwise to loosen the keeper nut.
Using a 5/16” (8mm) wrench, turn the adjustment hinge
pin clockwise or counterclockwise to level the refrigerator
and freezer door.
After leveling the door, turn the keeper nut
counterclockwise to tighten it.
CAUTION: Do not overtighten the door adjustment
screw. The hinge pin can be pulled out. (The adjustable
range of height is a maximum of 2” [5 cm]).
11 16
15
USING YOUR REFRIGERATOR
SETTING THE CONTROLS
The refrigerator control functions as the thermostat for the
entire appliance (refrigerator and freezer sections). The
colder the setting, the longer the compressor will run to
keep the temperature colder. The freezer control adjusts
ow from the freezer to the refrigerator.
Setting the freezer control to a lower temperature keeps
more cold air in the freezer compartment to make it
colder.
t The Refrigerator Temp Control ranges from 30°F to
46°F (1°C to 8°C). Press the Refrigerator Temp button
to cycle through the available temperature settings one
increment at a time. The recommended temperature for
the refrigerator compartment is 37°F (3°C).
t The Freezer Temp Control range is from -6°F to 8°F
(-21°C to -13°C). Press the Freezer Temp button to
cycle through the available temperature settings one
increment at a time. The recommended temperature for
the freezer compartment is 0°F (-18°C).
NOTE: When changing control settings, wait 24 hours
before making additional adjustments. The controls are set
correctly when milk or juice is as cold as you would like
rm. If the temperature in either
compartment is too cold or too warm, change the setting
one increment at a time. Wait 24 hours for the change to
stabilize before adjusting again.
Temperature Mode Switch Function (°F <->°C)
If you want to convert °F to °C or vice versa, press and
hold the Freezer Temp. and Refrigerator Temp. buttons at
ve seconds.
AIRFLOW
Cold air circulates from the freezer to the fresh food
section and back again through air vents in the wall
dividing the two sections. Be sure not to block vents while
ow
and may cause the refrigerator temperature to become
ow
diagram below.)
Temperature
IMPORTANT:
Because air circulates between both sections, any odors
formed in one section will transfer to the other. You must
thoroughly clean both sections to eliminate odors.
To prevent odor transfer and dried out food, wrap or
cover foods tightly. (See the Food Storage Guide section
for details.)
NOTE: If you close the refrigerator door, you may see the
freezer door open and close again due to pressure from
ow.
PRIOR TO USE
dust
accumulated during shipping.
2. Install accessories such as ice cube bin, drawers,
shelves, etc., in their proper places. They are packed
together to prevent possible damage during shipment.
3. Let your refrigerator run for at least 2 or 3 hours
ow of cold air
in the freezer compartment to ensure proper cooling.
Your refrigerator is now ready for use.
CONTROL PANEL FEATURES
Ice & Water Dispenser
Select Water, Crushed Ice or Cubed Ice by pressing the
ICE & WATER button to the selection desired. The Water,
Crushed Ice or Cubed Ice icon will light up to indicate the
selection.
Selecting this icon indicates that cubed ice
will be dispensed when the dispenser pad is
activated.
Selecting this icon indicates that water will be
dispensed when the dispenser pad is activated.
Selecting this icon indicates that crushed ice
will be dispensed when the dispenser pad is
activated.
To dispense water or ice, gently push your cup against
the dispenser pad.
NOTE: Hold your cup in place for a couple of seconds
after dispensing ice or water so the last few drops go in
oor.
16
CAUTION
Demo Mode (For Store Use Only)
The Demo Mode disables all cooling in the
refrigerator and freezer sections to conserve energy
while on display in a retail store.
To deactivate:
With either refrigerator door opened, press and
hold the Refrigerator Temp. and Accela Ice buttons
ve seconds. The control panel
will beep and the temperature settings will display
rm that Demo Mode is deactivated. Use the
same procedure to activate the Demo Mode.
Adjusting Cont rol Settings
Give the refrigerator time to cool down completely
nal adjustments. It is best to wait
24 hours to let the normal settings (recommended
in the Temperature section) stabilize before making r
any changes. If you need to adjust the temperature
in the refrigerator or freezer, start by adjusting the
refrigerator temperature and allow 24 hours for the
temperature to stabilize again. If it is still too warm or
too cold, then adjust the freezer control.
Use the settings listed in the chart below as a guide.l
Always remember to wait at least 24 hours between
adjustments.
USING YOUR REFRIGERATOR
Accela Ice
v When you press and hold the Ice Maker button for
approximately three seconds, the Accela Ice icon on
the display panel will illuminate and will continue for
24 hours.
v You can stop this function manually by pressing and
holding the button for three seconds orIce Maker
more.
v This function increases both ice making and freezing
capabilities.
Water Filter Reset
lter indicator turns on, you need
lte r. After changing the water
lte r, press and hold the Filter Reset button for three
. You need
lter approximately every six
months.
Door Alarm
v When power is connected to the refrigerator, the door
alarm is activated. This function cannot be deactivated.
v When either the refrigerator or freezer door is left
open for more than 60 seconds, the alarm tone will
sound to let you know that the door is open.
v When you close the door, the door alarrm will stop.
Control Lock
v The Control Lock button deactivates the controls and
dispenser functions. When power is initially connected
to the refrigeratorWKH/RFNIXQFWLRQLVRç
v If you want to activate the Lock function to lock other
buttons, press and hold the Control Lock button for
three seconds or more. The Control Lock indicator will
turn on and the function is now enabled.Lock
v When the Lock function is activated, no other buttons
will work. The dispenser pad is also deactivated.
v To disable the function, press and hold the ControlLock
Lock button for approximately three seconds.
A white light illuminates the dispenser area whenever
the dispenser pad is engaged. The dispenser area
can also be illuminated by mood light, which is
activated by pressing the Light button. When the
Mood Light is activated, the indicator light above the
Light button turns on.
CONDITION/REASON RECOMMENDED ADJUSTMENT
REFRIGERATOR section too
warm.
v Door opened often.
v Large amount of food
added.
v Room temperature very warm.
v Set the REFRIGERATOR
con trol one degree
colder; wait 24 hours for
the new setting to take
ect before making
another adjustment.
FREEZER section too warm/ice
not made fast enough.
v Door opened often.
v Large amount of food added.
v Very cold (55°F (13°C)) room
temperature. (Compressor
does not cycle often enough.)
v Heavy ice usage.
v Air vents blocked by items.
v Set the FREEZER control
one degree colder;
wait 24 hours for the
new setting to take full
ect before making
another adjustment.
v Move items out of air
stream.
REFRIGERATOR section too
cold.
v Controls not set correctly for
your conditions.
v Set the REFRIGERATOR
control one degree
warmer; wait 24 hours for
the new setting to take
ect before making
anot her adjus tment.
FREEZER section too cold.
v Controls not set correctly for
your conditions.
v Set the FREEZER control
one degree warmer;
wait 24 hours for the
new setting to take full
ect before making
another adjustment.
KRXUV7KHIXQFWLRQZLOODXWRPDWLFDOO\VKXWRçDIWHU
17
USING YOUR REFRIGERATOR
AUTOMATIC ICEMAKER
Ice is made in the automatic icemaker and sent to the
dispenser. The icemaker will produce 7 cubes per cycle
-approximately 70-120 cubes in a 24-hour period,
depending on freezer compartment temperature, room
temperature, number of door openings and other
operating conditions.
refrigerator to b egin making ice. Wait 72 hours for full
ice production to occur.
full, the in-door ice bin holds approximately 6 to 8 (12-
16 oz) glasses of ice.
the automatic icemaker, press the Ice
Maker button on the display. To turn on the automatic
icemaker, press the button again.
120 psi (138 to 827 kPa) on models without a water
amount and size of ice cubes.
WARNING
Personal Injury Hazard
Avoid contact with the moving parts of the ejector
mechanism, or the heating element that releases
automatic ice making mechanism while the refrigerator
is plugged in.
WHEN YOU SHOULD TURN THE ICEMAKER OFF
for several
hours.
minutes.
NOTE: The ice bin should be emptied when the Ice
Maker button is set to OFF.
NORMAL SOUNDS YOU MAY HEAR
if it has not yet been hooked up to water. To stop the
the icemaker.
NOTE: Keeping the icemaker on before the water line
is connected can damage the icemaker.
lls.
PREPARING FOR VACATION
Set the Ice Maker button on the display to and shut OFF
the water supply to the refrigerator.
NOTE: The ice bin should be emptied any time the Ice
Maker button is set to .OFF
If the ambient temperature will drop below freezing, have
DTXDOLoHGWHFKQLFLDQGUDLQWKHZDWHUVXSSO\V\VWHPWR
by ruptured water lines or connections.
WARNING: Connect to a potable water supply only.
lcemaker
Automatic Shuto Arm
18
USING YOUR REFRIGERATOR
rst ice and water dispensed may include particles
or odor from the water supply line or the water tank.
rst few batches of ice (about 24
cubes). This is also necessary if the refrigerator has not
been used for a long time.
v Never store beverage cans or other items in the ice
bin for the purpose of rapid cooling. Doing so may
damage the icemaker or the containers may burst.
lter
and water supply. If the problem continues, contact a
ed service center. Do not use the
ice or water until the problem is corrected.
v Keep children away from the dispenser. Children may
play with or damage the controls.
v The ice passage may become blocked with frost if only
crushed ice is used. Remove the frost that accumulates
by removing the ice bin and clearing the passage with
a rubber spatula. Dispensing cubed ice can also help
prevent frost buildup.
v Never use thin crystal glass or crockery to collect ice.
Such containers may chip or break resulting in glass
fragments in the ice.
lling it with water
or other beverages. Splashing may occur if ice is
dispensed into a glass that already contains liquid.
v Never use a glass that is exceptionally narrow or
deep. Ice may jam in the ice passage and refrigerator
ected.
v Keep the glass at a proper distance from the ice outlet.
A glass held too close to the outlet may prevent ice
from dispensing.
v To avoid personal injury, keep hands out of the ice
door and passage.
v Never remove the dispenser cover.
the
water supply and contact Sears Home Service in
U.S.A. call 1-844-553-6667, and in Canada call
1-800-469-4663.
CAUTION
AUTOMATIC ICEMAKER (continued)
19
USING YOUR REFRIGERATOR
FOOD STORAGE GUIDE
Wrap or store food in the refrigerator in airtight and
moisture-proof material unless otherwise noted. This
prevents food odor and taste transfer throughout the
refrigerator. For dated products, check date code to
ensure freshness.
STORING FROZEN FOOD
NOTE: Check a freezer guide or a reliable cookbook
for further information about preparing food for
freezing or food storage times.
Freezing
Your freezer will not quick-freeze a large quantity of
food. Do not put more unfrozen food into the freezer
than will freeze within 24 hours (no more than 2 to 3
lbs. of food per cubic foot of freezer space). Leave
enough space in the freezer for air to circulate around
packages. Be careful to leave enough room at the
front so the door can close tightly.
Storage times will vary according to the quality and
type of food, the type of packaging or wrap used
(how airtight and moisture-proof) and the storage
temperature. Ice crystals inside a sealed package are
normal. This simply means that moisture in the food
and air inside the package have condensed, creating
ice crystals.
NOTE: Allow hot foods to cool at room temperature
for 30 minutes, then package and freeze. Cooling hot
foods before freezing saves energy.
Packaging
Successful freezing depends on correct packaging.
When you close and seal the package, it must not
allow air or moisture in or out. If it does, you could
have food odor and taste transfer throughout the
refrigerator and could also dry out frozen food.
Packaging recommendations:
tting lids
• Straight-sided canning/freezing jars
• Heavy-duty aluminum foil
• Plastic-coated paper
• Non-permeable plastic wraps
ed freezer-grade self-sealing plastic bags
Follow package or container instructions for proper
freezing methods.
Do not use
• Bread wrappers
• Non-polyethylene plastic containers
• Containers without tight lids
• Wax paper or wax-coated freezer wrap
• Thin, semi-permeable wrap
CAUTION: Do not keep beverage cans or plastic
food containers in the freezer compartment. They may
break or burst if they freeze.
Items How to
Butter or
margarine
Cheese
Milk
Eggs
Fruit
Leafy
vegetables
Vegetables
with skins
(carrots,
peppers)
Fish
Leftovers
Keep opened butter in a covered
dish or closed compartment.
When storing an extra supply,
wrap in freezer packaging and
freeze.
Store in the original wrapping
until you are ready to use it. Once
opened, rewrap tightly in plastic
wrap or aluminum foil.
Wipe milk cartons. For best
storage, place milk on interior
shelf, not on door shelf.
Store in original carton on interior
shelf, not in door bin.
Wash, let dry, and store in refrigerator
in plastic bags or in a drawer.
Do not wash or hull fruit until you
are ready to use it. Sort and keep
fruit in its original container, in a
refrigerator drawer, or store in a
completely closed paper bag on a
refrigerator shelf.
Remove store wrapping and trim
bruised and discolored
areas. Wash in cold water and
drain. Place in plastic bag or
plastic container and store in
refrigerator drawer.
Place in plastic bags or plastic
container and store in drawer.
sh the
same day purchased.
Cover leftovers with plastic wrap or
aluminum foil, or store in plastic
containers with tight lids.
Ice Cream When storing frozen food like ice
cream for a long period, place
it on the freezer shelf, not in the
door bins.
20
REFRIGERATOR SECTION
WATER AND ICE DISPENSER
To dispense cold water, push on the dispenser switch
with a glass.
WARNING: Do no t put your
ngers up the ice chute opening.
Doing so can result in severe injury.
CAUTION: Do not dispense ice
ne china or crystal glasses.
China or crystal can break.
Some dripping may occur after dispensing. Hold your
cup beneath the dispenser for a few seconds after
dispensing to catch all of the drops.
NOTE : The dispenser is equipped with a light that
turns on when the dispenser pad is engaged.
USING YOUR REFRIGERATOR
21
USING YOUR REFRIGERATOR
REFRIGERATOR/FREEZER DOOR BINS
The refrigerator and freezer feature bins which can
easily be arranged to store packaged products.
To remove, holding both sides, lift the door bin and pull it
out.
To replace the bin, slide it in above the desired support and
push down one side at a time until it snaps into place.
REFRIGERATOR DRAWERS AND COVER
The refrigerator drawers allow for better conservation of
fruits and vegetables.
To remove the refrigerator drawers—pull out the drawer
to full extension , lift the front up , and pull straight
out.
To install—slightly tilt up the front, insert the drawer into
the frame and push it back into place.
NOTE: When removing or installing the lower
refrigerator drawer, lift the cover to help remove or
insert the drawer.
CAUTION:
• Use both hands to assemble and disassemble the
refrigerator drawers. The compartments are heavy
lled with food and may cause injury if
dropped.
• Open the refrigerator door fully when disassembling
or reassembling the refrigerator drawers.
To remove the cover—hold the cover with both hands
and pull it out.
NOTE: Remove the refrigerator drawers before removing
the cover.
CAUTION: You will see the water tank while
removing the refrigerator drawer. Do not remove the
water tank or water leakage may occur. The water
tank is not a removable part.
Tank
22
USING YOUR REFRIGERATOR
REFRIGERATOR/FREEZER SHELVES
The shelves in your refrigerator and freezer are
adjustable to meet your individual storage needs.
Adjusting the shelves to t items of dierent heights
will make  nding the exact item you want easier. Doing
so will also reduce the amount of time the refrigerator
doors are open which will save energy.
IMPORTANT: Do not clean glass shelves with warm
water while they are cold. Shelves may break if exposed
to sudden temperature changes or impact.
NOTE: Glass shelves are heavy. Use special care when
removing them.
Detaching the shelf
Remove all items from the shelf. Lift the front of the shelf
slightly to disengage the rail stops.
Pull the shelf forward about halfway, keeping the front
of the shelf slightly lifted.
Holding the shelf with both hands, tilt the shelf and pull
it out.
Assembling the shelf
Tilt the front of the shelf up and guide the shelf into the
slots at a desired height. Slide the shelf in then lower the
front of the shelf.
CAUTION: Make sure that shelves are level from one
side to the other. Failure to do so may result in the shelf
falling or spilling food.
23
GRAB-N-GO
The GRAB-N-GO compartment allows for easy access
to commonly used food items. The outer GRAB-N-GO
door includes three additional door bins.
GRAB-N-GO Compartment
To access the GRAB-N-GO compartment,
lightly press the button on the right
refrigerator door handle until you hear a
click to open the door. There is no need to
grip the handle when opening the GRAB-N
-GO compartment.
GRAB-N-GO Case
To open the GRAB-N-GO case, pull evenly on the
marked area to pop it open. The GRAB-N-GO Case is
removable for easy cleaning and adjustment.
CAUTION: Remove contents from GRAB-N-GO case
before disassembly.
1 To remove the GRAB-N-GO case, lift up and pull out.
2 To replace the GRAB-N-GO case, line the tabs on
the GRAB-N-GO Case with the slots on the door and
push down until it snaps into place.
GRAB-N-GO Door Bins
The GRAB-N-GO inner and outer door bins are
removable for easy cleaning.
1 To remove the door bins, lift up and pull out.
2 To replace the door bins, slide the door bin in above
the desired support and push down until it snaps into
place.
Press until
you hear
the "Click"
sound
Press until
you hear
the "Click"
sound
USING YOUR REFRIGERATOR
TM
TM
TM
TM
24
FREEZER SECTION
ICE STORAGE BIN
The ice bin stores the ice cubes made by the icemaker.
If you need to remove the ice storage bin, do so as
follows:
NOTE: Use both hands to remove the ice bin to avoid
dropping it.
Lift the ice storage bin slightly and pull it out as
shown in the  gure.
USING YOUR REFRIGERATOR
25
WATER FILTER
WATER FILTER
lter:
v Approximately every 6 months.
lter indicator turns on.
v When the water dispenser output decreases.
v When the ice cubes are smaller than normal.
Rotate the water
lter up into
position and
close the cover.
The cover will
click when closed
correctly.
3. lter is replaced, dispense 2.5
ush for approximately 5 minutes)
to remove trapped air and contaminants from
the system. Do not dispense the entire 2.5 gallon
amount continuously. Depress and release the
dispenser pad for cycles of 30 seconds ON and 60
seconds OFF.
NOTE: lter, visit a
Sears store or call U.S.A. 1-844-553-6667, and in
Canada call 1-800-469-4663. You may also purchase
online at www.sears.com
1. Remove the old water olter.
Press the push button to open the
lter cover.
NOTE: lter
causes a small amount of water
(around 1 oz. or 25 cc) to drain. Place
lter cover to
lter upright,
once it is removed, to prevent any remaining water from
lter.
Pull the water
lter downward
and pull out.
Make sure to
lter
down completely
before pulling
it out of the
manifold hole.
lter.
lter out of its packing and remove
the protective
cover from the
o-rings. With the
lter tabs
in the horizontal
position, push the
lter
into the manifold
hole until it stops.
NOTE: $ZDWHUoOWHULVQRWQHFHVVDU\WRRSHUDWHWKLV
refrigerator.
,QVWDOODZDWHUoOWHUWRLPSURYHWKHTXDOLW\RIWKHLFHDQG
water dispensed.
26
Performance Data Sheet
Use Replacement Cartridge: ADQ7361340
The concentration of the indicated substances in water entering the system was reduced to a concentration less than or
equal to the permissible limit for water leaving the system as speci ed in NSF/ANSI Standard 42 and Standard 53.
* Based on the use of Cryptosporidium parvum oocysts
System tested and certi ed by NSF International against NSF/ANSI Standard 42 and Standard 53 for the
reduction of substances listed below.
WATER FILTER
Contaminant Reduction Average
In uent
NSF speci ed Challenge
Concentration
Avg %
Reduction
Average
Product Water
Concentration
Max Permissible
Product Water
Concentration
NSF Reduction
Requirements
Chlorine Taste and Odor 2.0 mg/L 2.0 mg/L ± 10% 97.5% 0.05 mg/L N/A  50%
Nominal Particulate Class I, ,
0.5 to < 1.0 m
5,600,000
pts/mL At least 10,000 particles/mL 99.3% 73,000 pts/ml N/A 85%
Asbestos 170 MFL 10
7 to 108 MFL;  bers greater
than 10 m in length >99% < 1 MFL N/A 99%
Atrazine 0.0087 mg/L 0.009 mg/L ± 10% 94.2% 0.003 mg/L 0.003 mg/L N/A
Benzene 0.017 mg/L 0.015 mg/L ± 10% 97% 0.005 mg/L 0.005 mg/L N/A
Carbofuran 0.073 mg/L 0.08 mg/L ± 10% 98.8% 0.001 mg/L 0.04 mg/L N/A
Lindane 0.002 mg/L 0.002 mg/L ± 10% 98.8% 0.00002 mg/L 0.0002 mg/L N/A
P-Dichlorobenzene 0.263 mg/L 0.225 mg/L ± 10% 99.6% 0.001 mg/L 0.075 mg/L N/A
Toxaphene 0.015 mg/L 0.015 mg/L ± 10% 93.5% 0.001 mg/L 0.003 mg/L N/A
2,4-D 0.25 mg/L 0.210 mg/L ± 10% 99.5% 0.012 mg/L 0.07 mg/L N/A
Lead pH @6.5 0.150 mg/L 0.15 mg/L ± 10% >99.3% 0.001 mg/L 0.010 mg/L N/A
Lead pH @8.5 0.150 mg/L 0.15 mg/L ± 10% >99.3% 0.001 mg/L 0.010 mg/L N/A
Mercury @ pH 6.5 0.006 mg/L 0.006 mg/L ± 10% 96.5 0.0002 mg/L 0.002 mg/L N/A
Mercury @ pH 8.5 0.0062 mg/L 0.006 mg/L ± 10% 86.9 0.0081 mg/L 0.002 mg/L N/A
Cyst* 120,000 cysts/L Minimum 50,000 cysts/L 99.99% <1 cyst/L N/A 99.95%
27
WATER FILTER
It is essential that the manufacturer’s recommended
lter replacement
requirements be carried out for the product to perform as
advertised.
NOTE: While the testing was performed under standard
laboratory conditions, actual performance may vary.
Replacement Cartridge:
T lter, visit your local Sears
store or in the U.S.A. call 1-844-553-6667, and in Canada
call 1-800-469-4663. You may also purchase online at
www.sears.com
Product distributed in the United States by Sears Brands
man Estates, IL 60179.
3M is a trademark of 3M Company.
NSF is a trademark of NSF International.
© 2009 3M Company. All rights reserved.
WARNING
CAUTION
To reduce the risk associated with choking: Do not
allow children under 3 years of age to have access to
small parts during the installation of this product.
To reduce the risk associated with ingestion
of contaminants: Do not use with water that is
microbiologically unsafe or of unknown quality without
adequate disinfection before and after the system.
ed for cyst reduction may be used on
lterable cysts. EPA
Establishment Number 070595-MEX-001
To reduce the risk associated with property damage
due to water leakage:
v Read and follow the Water Filter instructions before
installation and use of this system.
v Installation and use comply with all state and MUST
local plumbing codes.
v Do not install if water pressure exceeds 120 psi (827
kPa). Contact a plumbing professional if you are
uncertain of how to check your water pressure.
v Do not install where water hammer conditions may
occur. If water hammer conditions exist, you must
install a water hammer arrester. Contact a plumbing
professional if you are uncertain of how to check for
this condition.
v Do not install on hot water supply lines.
The maximum operating water temperature of this
lter system is 100°F (38°C).
lter from freezing. Do not operate
refrigerator in ambient conditions below 55°F. Drain
lter when storing unit in temperatures below
40°F (4.4°C).
lter must be replaced every
six months, at the rated capacity, or if a noticeable
ow rate occurs.
v Do not install systems in areas where ambient
temperatures may go above 110ºF (43.3ºC).
ow prevention device is installed on
a water system, a device for controlling pressure due
to thermal expansion must be installed.
ttings are secure and free
from leaks.
Application Guidelines/Water Supply Parameters
Service Flow 0.5 gpm (1.9 lpm)
Water Supply Community or private well -
Potable Water
Water Pressure 20-120 psi (138 - 827 kPa)
Water Temperature 33°F - 100°F (0.6°C - 38°C)
Capacity 200 gallons (757 liters)
cation 14-3015.
ed by California
Department of Public Health and replacement parts, see
Performance Data Sheet.
28
WATER FILTER
Water Treatment Device
Certificate Number
Date Issued: December 15, 2009
201909-
Manufacturer: Sears Roebuck and Co.
The water treatment device(s) listed on this certificate have met the testing requirements pursuant to Section
116830 of the Health and Safety Code for the following health related contaminants:
so ts eb sAst sy C
Lead
Mercury
2,4-D Reduction
Atrazine
Benzene
Carbofuran
Lindane
p-Dichlorobenzene
Toxaphene
Microbiological Contaminants and Turbidity Inorganic/Radiological Contaminants
Organic Contaminants
200 gal
Rated Service Capacity: 0.5 gpm
Rated Service Flow:
Conditions of Certification:
29
CARE AND CLEANING
WARNING
Explosion Hazard
Use non- ammable cleaner. Failure to do so can result
in  re, explosion, or death.
Both the refrigerator and freezer sections defrost
automatically; however, clean both sections about once a
month to prevent odors. Wipe up spills immediately.
GENERAL CLEANING TIPS
• Unplug refrigerator or disconnect power.
• Remove all removable parts, such as shelves, crispers,
etc. Refer to sections in Using Your Refrigerator for
removal instructions.
• Use a clean sponge or soft cloth and a mild detergent
in warm water. Do not use abrasive or harsh cleaners.
• Hand wash, rinse and dry all surfaces thoroughly.
• Plug in refrigerator or reconnect power.
OUTSIDE
Waxing external painted metal surfaces helps provide
rust protection. Do not wax plastic parts. Wax painted
metal surfaces at least twice a year using appliance wax
(or auto paste wax). Apply wax with a clean, soft cloth.
For products with a stainless steel exterior, use a clean
sponge or soft cloth and a mild detergent in warm water.
Do not use abrasive or harsh cleaners. Dry thoroughly
with a soft cloth.
INSIDE WALLS (allow freezer to warm up so
the cloth will not stick)
To help remove odors, you can wash the inside of the
refrigerator with a mixture of baking soda and warm
water. Mix 2 tablespoons of baking soda to 1 quart of
water (26 g soda to 1 liter water.) Be sure the baking soda
is completely dissolved so it does not scratch the surfaces
of the refrigerator.
DOOR LINERS AND GASKETS
Use a clean sponge or soft cloth and a mild detergent
in warm water. Do not use cleaning waxes, concentrated
detergents, bleaches, or cleaners containing petroleum on
plastic refrigerator parts.
PLASTIC PARTS (Covers and Panels)
Use a clean sponge or soft cloth and a mild detergent
in warm water. Do not use window sprays, abrasive
cleansers, or  ammable  uids. These can scratch or
damage the material.
CONDENSER COILS
Use a vacuum cleaner with
an attachment to clean the
condenser cover and vents.
Do not remove the panel
covering the condenser
coil area.
CAUTION: While cleaning the inside, do not spray
water.
30
LED LIGHT REPLACEMENT
NOTE: The refrigerator and freezer compartment lights
are LED interior lighting, and service should be performed
by a quali ed technician.
POWER INTERRUPTIONS
1. If the power will be out for 24 hours or less, keep all
refrigerator doors closed to help foods stay cold and
frozen.
2. If the power will be out for more than 24 hours, remove
all frozen food and store it in a frozen food locker.
WHEN YOU GO ON VACATION
If you choose to leave the refrigerator on while you are
away, follow these steps to prepare your refrigerator
before you leave.
1. Use up any perishables and freeze other items.
2. Turn o the icemaker and empty the ice bin.
If you choose to turn the refrigerator o before you leave,
follow these steps.
1. Remove all food from the refrigerator.
2. Depending on your model, set the thermostat control
(refrigerator control) to OFF. See the SETTING THE
CONTROLS section.
3. Clean the refrigerator, wipe it and dry well.
4. Tape rubber or wood blocks to the tops of both doors
to prop them open far enough for air to get in. This
stops odor and mold from building up.
WHEN YOU MOVE
When you are moving your refrigerator to a new home,
follow these steps to prepare it for the move.
1. Remove all food from the refrigerator and pack all
frozen food in dry ice.
2. Unplug the refrigerator.
3. Clean, wipe and dry thoroughly.
4. Take out all removable parts, wrap them well
and tape them together so they do not shift and
rattle during the move. Refer to the USING YOUR
REFRIGERATOR section for removal instructions.
5. Depending on the model, raise the front of the
refrigerator so it rolls more easily OR screw in the
leveling legs all the way so they do not scrape the
oor. See the section.DOOR ALIGNMENT
6. Tape the doors shut and tape the power cord to the
refrigerator cabinet.
When you get to your new home, put everything back and
refer to the REFRIGERATOR INSTALLATION section for
preparation instructions.
WARNING
Electrical Shock Hazard
Before service is performed on the interior LED lighting,
unplug the refrigerator or turn o power at the circuit
breaker or fuse box.
Setting either or both controls to the OFF position does
not remove power to the light circuit.
CARE AND CLEANING
31
CONNECTING THE WATER LINE
BEFORE YOU BEGIN
This water line installation is not covered by the refrigerator
warranty. Follow these instructions carefully to minimize the
risk of expensive water damage.
Water hammer (water banging in the pipes) in house
plumbing can cause damage to refrigerator parts and can
lead to water leakage or  ooding. Call a quali ed plumber
to correct water hammer before installing the water supply
line to the refrigerator.
CAUTION: To prevent burns and product damage, only
connect the refrigerator water line to a cold water supply.
Connect to a potable water supply only.
If you use your refrigerator before connecting the water
line, make sure the Ice Maker button is set to OFF.
Do not install the icemaker tubing in areas where
temperatures fall below freezing.
WATER PRESSURE
Connect to the cold water supply. The water pressure
must be between 20 and 120 psi (138 to 827 kPa) on
models without a water  lter and between 40 and 120 psi
(276 to 827 kPa) on models with a water  lter.
If a reverse osmosis water ltration system is connected
to your cold water supply, this water line installation is not
covered by the refrigerator warranty. Follow the following
instructions carefully to minimize the risk of expensive water
damage.
If a reverse osmosis water ltration system is connected
to your cold water supply, the water pressure to the reverse
osmosis system needs to be a minimum of 40 to 60 psi (2.8
kgf/cm2 ~ 4.2 kgf/cm2, less than 2.0~3.0 sec. to  ll a cup
of 7 oz capacity).
If the water pressure from the reverse osmosis system is less
than 21 psi or 1.5 kgf/cm2 (takes more than 4.0 sec to  ll a
cup of 7 oz capacity):
• Check to see if the sediment lter in the reverse osmosis
system is blocked. Replace the  lter if necessary.
• Allow the storage tank on the reverse osmosis system to
re ll after heavy usage.
• If the issue concerning water pressure from reverse
osmosis remains, call a licensed, quali ed plumber.
• All installations must be in accordance with local
plumbing code requirements.
CAUTION: Wear eye protection during installation to
prevent injury.
WHAT YOU WILL NEED
• Copper Tubing, ¼ in. outer
diameter, to connect the refrigerator
to the water supply. Be sure both
ends of the tubing are cut square.
• To determine how much tubing you
need: measure the distance from the water valve on the
back of the refrigerator to the water supply pipe. Then,
add 8 feet (2.4 m). Be sure there is su cient extra tubing
(about 8 feet [2.4 m] coiled into 3 turns of about 10 in.
[25 cm] diameter) to allow the refrigerator to move out
from the wall after installation.
• Power drill.
• ½ in. or adjustable wrench.
• Flat blade and Phillips head screwdrivers.
• Two ¼ in. outer diameter
compression nuts and
2 ferrules (sleeves) to
connect the copper tubing
to the shuto valve and the
refrigerator water valve.
• If your existing copper water
line has a  ared  tting at the
end, you will need an adapter
(available at plumbing supply
stores) to connect the water line
to the refrigerator OR you can
cut o the ared  tting with
a tube cutter and then use a
compression  tting.
• Shuto valve to connect
to the cold water line. The
shuto valve should have a water inlet with a minimum
inside diameter of / in. at the point of connection
to the COLD WATER LINE.
Saddle-type shuto valves
are included in many water
supply kits. Before purchasing,
make sure a saddle-type
valve complies with your local
plumbing codes.
NOTE: A Self Piercing Saddle Type Water Valve should
not be used.
WARNING
Electrical Shock Hazard
When using any electrical device (such as a power
drill) during installation, be sure the device is battery
powered, double insulated or grounded in a manner that
will prevent the hazard of electric shock.
32
INSTALLATION INSTRUCTIONS
Install the shuto valve on the nearest frequently used
drinking water line.
1. SHUT OFF THE MAIN WATER SUPPLY
Turn on the nearest faucet to relieve the pressure on the
line.
2. CHOOSE THE VALVE LOCATION
Choose a location for the valve that is
easily accessible. It is best to connect
into the side of a vertical water pipe.
When it is necessary to connect into
a horizontal water pipe, make the
connection to the top or side, rather
than at the bottom, to avoid drawing
o any sediment from the water pipe.
3. DRILL THE HOLE FOR THE VALVE
Drill a ¼ in. hole in the water pipe using a sharp bit.
Remove any burrs resulting from
drilling the hole in the pipe. Be
careful not to allow water to
drain into the drill. Failure to
drill a ¼ in. hole may result
in reduced ice production or
smaller cubes.
NOTE: The hookup line cannot be white, plastic
tubing. Licensed plumbers must use only copper
tubing NDA tubing #49595 or 49599 or Cross Link
Polyethylene (PEX) tubing.
4. FASTEN THE SHUTOFF VALVE
Fasten the shuto valve to the cold water pipe with
the pipe clamp.
NOTE: Commonwealth of Massachusetts Plumbing
Codes 248CMR shall be adhered to. Saddle valves are
illegal and use is not permitted in Massachusetts.
Consult with your licensed plumber.
5. TIGHTEN THE PIPE CLAMP
Tighten the clamp screws until the sealing washer
begins to swell.
NOTE: Do not overtighten clamp or you may crush the
tubing.
6. ROUTE THE TUBING
Route the tubing between the cold water line and the
refrigerator.
Route the tubing through a hole drilled in the wall or
oor (behind the refrigerator or adjacent base cabinet)
as close to the wall as possible.
NOTE: Be sure there is su cient extra tubing (about
8 feet coiled into 3 turns of about 10 in. diameter) to
allow the refrigerator to move out from the wall after
installation.
7. CONNECT THE TUBING TO THE VALVE
Place the compression nut and ferrule (sleeve) for
copper tubing onto the end of the tubing and connect
it to the shuto valve. Make sure the tubing is fully
inserted into the valve. Tighten the compression nut
securely.
NOTE:
IMPORTANT : Use only new water hose-sets,
do not reuse old water hose -sets
Commonwealth of Massachusetts Plumbing
Codes 248CMR shall be adhered to. Saddle valves are
illegal and their use is not permitted in
Massachusetts. Consult with your licensed plumber.
Pipe Clamp
Saddle-Type
Shuto Valve
Vertical Cold
Water Pipe
Pipe Clamp
Clamp Screw
Washer
Inlet End
Saddle-Type
Shuto Valve
Packing Nut
Outlet Valve
Compression Nut
Ferrule (sleeve)
CONNECTING THE WATER LINE
33
CONNECTING THE WATER LINE
8. FLUSH OUT THE TUBING
Turn the main water supply on and
ush out the tubing until the water
is clear.
Shut the water o at the water
valve after about one quart of
water has been ushed through the
tubing.
9. CONNECT THE TUBING TO THE
REFRIGERATOR
NOTE: Before making the connection to the
refrigerator, be sure that the refrigerator power cord is
not plugged into the wall outlet.
1. Remove the plastic  exible cap from the water valve.
2. Place the compression nut and ferrule (sleeve) onto the
end of the tubing as shown.
3. Insert the end of the copper tubing into the connection
as far as possible. While holding the tubing, tighten the
tting.
10. TURN THE WATER ON AT THE SHUTOFF VALVE
Tighten any connections that leak.
11. PLUG IN THE REFRIGERATOR
Arrange the coil of tubing so that it does not vibrate
against the back of the refrigerator or against the wall.
Push the refrigerator back to the wall.
12. START THE ICEMAKER
Set the Ice Maker button to ON.
The icemaker will not begin to operate until it reaches
its operating temperature of 15°F (–9°C) or below. It
will then begin operation automatically if the Ice Maker
button is set to ON.
CAUTION: Check to see if leaks occur at the water line
connections.
¼” (6.35 mm) Tubing
Refrigerator
Connection
Tubing Clamp
¼” (6.35 mm)
Compression
Nut
Ferrule
(Sleeve)
Back of refrigerator
34
Problem Possible Causes Solutions
Refrigerator and
Freezer section are
not cooling.
The power supply cord is unplugged. Firmly plug the cord into a live outlet with the proper
voltage.
Refrigerator is set to demo mode. Demo Mode allows the lights and control display to
work normally while disabling cooling to save energy
while on the showroom  oor. Refer to the Setting the
Controls section for instructions on how to disable
Demo Mode.
Refrigerator is in the defrost cycle. During the defrost cycle, the temperature of each
compartment may rise slightly. Wait 30 minutes and
con rm the proper temperature has been restored
once the defrost cycle has completed.
Refrigerator was recently installed. It may take up to 24 hours for each compartment to
reach the desired temperature.
Refrigerator was recently relocated. If the refrigerator was stored for a long period of time
or moved on its side, it is necessary for the refrigerator
to lay upright for 24 hours before connecting it to
power.
Cooling System runs
too much. Refrigerator is replacing an older
model. Modern refrigerators require more operating time but
use less energy due to more e cient technology.
Refrigerator was recently plugged in
or power restored. The refrigerator will take up to 24 hours to cool
completely.
Door opened often or a large amount
of food / hot food was added. Adding food and opening the door warms the
refrigerator, requiring the compressor to run longer in
order to cool the refrigerator back down. In order to
conserve energy, try to get everything you need out of
the refrigerator at once, keep food organized so it is
easy to  nd, and close the door as soon as the food is
removed. (Refer to the Food Storage Guide.)
Doors are not closed completely. Firmly push the doors shut. If they will not shut all the
way, see the Doors will not close completely or pop
open section in Parts & Features Troubleshooting.
Refrigerator is installed in a hot
location. The compressor will run longer under warm conditions.
At normal room temperatures (70°F or 21ºC) expect
your compressor to run about 40% to 80% of the
time. Under warmer conditions, expect it to run even
more often. The refrigerator should not be operated
above 110°F (43ºC).
Condenser / back cover is clogged. Use a vacuum cleaner with an attachment to clean the
condenser cover and vents. Do not remove the panel
covering the condenser coil area.
TROUBLESHOOTING GUIDE
Before conducting troubleshooting, make sure that the following basic requirements are met:
Service Flow 0.5 gpm (1.9 lpm)
Water Supply Potable Water
Water Pressure 40-120 psi (276 - 827 kPa)
Water Temperature 33°F - 100°F (0.6°C - 38°C)
Electrical Ratings 115 Volts, 60 Hz, AC only, and fused
at 15 amperes (minimum).
COOLING
35
COOLING
Problem Possible Causes Solutions
Refrigerator or
Freezer section is too
warm.
Refrigerator was recently installed. It may take up to 24 hours for each compartment to
reach the desired temperature.
Air vents are blocked. Rearrange items to allow air to  ow throughout the
compartment. Refer to the Air ow diagram in the
Using Your Refrigerator section.
Doors are opened often or for long
periods of time.
When the doors are opened often or for long periods
of time, warm, humid air enters the compartment.
This raises the temperature and moisture level within
the compartment. To lessen the e ect, reduce the
frequency and duration of door openings.
Unit is installed in a hot location. The refrigerator should not be operated in
temperatures above 110ºF (43ºC).
A large amount of food or hot food
was added to either compartment.
Adding food warms the compartment requiring the
cooling system to run. Allowing hot food to cool to
room temperature before putting it in the refrigerator
will reduce this e ect.
Doors not closed correctly. See the Doors will not close correctly or pop open
section in Parts & Features Troubleshooting.
Temperature control is not set
correctly.
If the temperature is too warm, adjust the control one
increment at a time and wait for the temperature to
stabilize. Refer to the Setting the Controls section for
more information.
Defrost cycle has recently completed. During the defrost cycle, the temperature of each
compartment may raise slightly and condensation may
form on the back wall. Wait 30 minutes and con rm
the proper temperature has been restored once the
defrost cycle has completed.
Interior moisture
buildup.
Doors are opened often or for long
periods of time.
When the doors are opened often or for long periods
of time, warm, humid air enters the compartment.
This raises the temperature and moisture level within
the compartment. To lessen the e ect, reduce the
frequency and duration of door openings.
Doors not closed correctly. See the section in the Doors will not close correctly
Troubleshooting section.
Weather is humid. Humid weather allows additional moisture to enter the
compartments when the doors are opened leading to
condensation or frost. Maintaining a reasonable level
of humidity in the home will help to control the amount
of moisture that can enter the compartments.
Defrost cycle recently completed. During the defrost cycle, the temperature of each
compartment may raise slightly and condensation may
form on the back wall. Wait 30 minutes and con rm
that the proper temperature has been restored once
the defrost cycle has completed.
Food is not packaged correctly. Food stored uncovered or unwrapped, and damp
containers can lead to moisture accumulation within
each compartment. Wipe all containers dry and store
food in sealed packaging to prevent condensation and
frost.
TROUBLESHOOTING GUIDE
36
Problem Possible Causes Solutions
Food is freezing
in the refrigerator
compartment.
Food with high water content was
placed near an air vent.
Rearrange items with high water content away from
air vents.
Refrigerator temperature control is set
incorrectly.
If the temperature is too cold, adjust the control one
increment at a time and wait for the temperature to
stabilize. Refer to the Setting the Controls section for
more information.
Refrigerator is installed in a cold
location. When the refrigerator is operated in temperature
below 41°F (5°C), food can freeze in the refrigerator
compartment. The refrigerator should not be operated
in temperature below 55°F (13°C).
Frost or ice crystals
form on frozen food
(outside of package).
Door is opened frequently or for long
periods of time. When the doors are opened often or for long periods
of time, warm, humid air enters the compartment. This
raises the temperature and moisture level within the
compartment. Increased moisture will lead to frost
and condensation. To lessen the e ect, reduce the
frequency and duration of door openings.
Door is not closing properly. Refer to the Doors will not close correctly or pop
open section in the Troubleshooting section.
Refrigerator or
Freezer section is too
cold.
Incorrect temperature control settings. If the temperature is too cold, adjust the control one
increment at a time and wait for the temperature to
stabilize. Refer to the Setting the Controls section for
more information.
Frost or ice crystals
on frozen food
(inside of sealed
package).
Condensation from food with a high
water content has frozen inside of the
food package.
This is normal for food items with a high water
content.
Food has been left in the freezer for
a long period of time.
Do not store food items with high water content in the
freezer for a long period of time.
Icemaker is not
making enough ice. Demand exceeds ice storage
capacity. The icemaker will produce approximately 100 cubes in
a 24 hour period.
House water supply is not connected,
valve is not turned on fully, or valve is
clogged.
Connect the refrigerator to a cold water supply with
adequate pressure and turn the water shuto valve
fully open.
If the problem persists, it may be necessary to contact
a plumber.
Water  lter has been exhausted. It is recommended that you replace the water lter:
• Approximately every 6 months.
• When the water  lter indicator turns on.
• When the water dispenser output decreases.
• When the ice cubes are smaller than normal.
Low house water supply pressure. The water pressure must be between 20 and 120 psi
(138 - 827 kPa) on models without a water  lter and
between 40 and 120 psi (276 - 827 kPa) on models
with a water  lter.
If the problem persists, it may be necessary to contact
a plumber.
Reverse Osmosis  ltration system is
used.
Reverse osmosis  ltration systems can reduce the
water pressure below the minimum amount and result
in icemaker issues. (Refer to Water Pressure section.)
Tubing connecting refrigerator to
house supply valve is kinked. The tubing can kink when the refrigerator is moved
during installation or cleaning resulting in reduced
water  ow. Straighten or repair the water supply line
and arrange it to prevent future kinks.
COOLING/ICE & WATER
TROUBLESHOOTING GUIDE
37
Problem Possible Causes Solutions
Icemaker is not
making enough ice
(continued).
Doors are opened often or for long
periods of time. If the doors of the unit are opened often, ambient
air will warm the refrigerator which will prevent the
unit from maintaining the set temperature. Lowering
the refrigerator temperature can help, as well as not
opening the doors as frequently.
Doors are not closed completely. If the doors are not properly closed, ice production
will be a ected. See the Doors will not close
completely or pop open section in Parts & Features
Troubleshooting for more information.
The temperature setting for the
freezer is too warm. The recommended temperature for the freezer
compartment for normal ice production is 0°F. If the
freezer temperature is warmer, ice production will be
a ected.
Dispensing water
slowly. Water  lter has been exhausted. It is recommended that you replace the water lter:
• Approximately every 6 months.
• When the water  lter indicator turns on.
• When the water dispenser output decreases.
• When the ice cubes are smaller than normal.
Reverse osmosis  ltration system is
used. Reverse osmosis  ltration systems can reduce the water
pressure below the minimum amount and result in
icemaker issues.
If the problem persists, it may be necessary to contact
a plumber.
Low house water supply pressure. The water pressure must be between 20 and 120 psi
(138 - 827 kPa) on models without a water  lter and
between 40 and 120 psi (276 - 827 kPa) on models
with a water  lter.
If the problem persists, it may be necessary to contact
a plumber.
Not dispensing ice. Doors are not closed completely. Ice will not dispense if any of the refrigerator doors
are left open.
Infrequent use of the dispenser. Infrequent use of the ice dispenser will cause the cubes
to stick together over time, which will prevent them
from properly dispensing. Check the ice bin for ice
cubes clumping/sticking together. If they are, break up
the ice cubes to allow for proper operation.
The delivery chute is clogged with
frost or ice fragments. Eliminate the frost or ice fragments by removing the
ice bin and clearing the chute with a plastic utensil.
Dispensing cubed ice can also help prevent frost or ice
fragment buildup.
The dispenser display is locked. Press and hold the button for three seconds to Lock
unlock the control panel and dispenser.
Ice bin is empty. It may take up to 24 hours for each compartment to
reach the desired temperature and for the icemaker
to begin making ice. Make sure that the shuto (arm/
sensor) is not obstructed.
Once the ice supply in the bin has been completely
exhausted, it my take up to 90 minutes before
additional ice is available, and approximately 24
hours to completely re ll the bin.
ICE & WATER
TROUBLESHOOTING GUIDE
38
Problem Possible Causes Solutions
Icemaker is not
making ice.
Refrigerator was recently installed or
icemaker recently connected.
It may take up to 24 hours for each compartment to
reach the desired temperature and for the icemaker to
begin making ice.
Icemaker not turned on. Locate the Ice Maker button on the display and
con rm that it is set to ON.
The ice detecting sensor is obstructed. Foreign substances or frost on the ice-detecting sensor
can interrupt ice production. Make sure that the sensor
area is clean at all times for proper operation.
The refrigerator is not connected to
a water supply or the supply shuto
valve is not turned on.
Connect refrigerator to the water supply and turn the
water shuto valve fully open.
Icemaker shuto (arm or sensor)
obstructed.
If your icemaker is equipped with an ice shuto arm,
make sure that the arm moves freely. If your icemaker
is equipped with the electronic ice shuto sensor,
make sure that there is a clear path between the two
sensors.
Reverse osmosis water  ltration
system is connected to your cold
water supply.
Reverse osmosis  ltration systems can reduce the
water pressure below the minimum amount and result
in icemaker issues. (Refer to the Water Pressure
section.)
Not dispensing
water.
New installation or water line recently
connected.
Dispense 2.5 gallons (9.5 l) of water ( ush for
approximately 5 minutes) to remove trapped air and
contaminants from the system. Do not dispense the
entire 2.5 gallon (9.5 l) amount continuously. Depress
and release the dispenser pad for cycles of 30
seconds ON and 60 seconds OFF.
The dispenser panel is locked. Press and hold the button for three seconds to Lock
unlock the control panel and dispenser.
The dispenser is not set for water
dispensing.
The dispenser can be set for ice or water. Make
certain that the control panel is set for the proper
operation. Press the Water button on the control panel
to dispense water.
Refrigerator or freezer doors are not
closed properly.
Water will not dispense if any of the refrigerator
doors are left open.
Water  lter has been recently
removed or replaced.
After the water  lter is replaced, dispense 2.5 gallons
(9.5 l) of water ( ush for approximately 5 minutes) to
remove trapped air and contaminants from the system.
Do not dispense the entire 2.5 gallon (9.5 l) amount
continuously. Depress and release the dispenser pad
for cycles of 30 seconds ON and 60 seconds OFF.
Tubing connecting refrigerator to
house supply valve is kinked.
The tubing can kink when the refrigerator is moved
during installation or cleaning resulting in reduced
water  ow. Straighten or repair the water supply line
and arrange it to prevent future kinks.
The house water supply is not
connected, the valve is not turned on
fully, or the valve is clogged.
Connect refrigerator to the water supply and turn the
water shuto valve fully open.
If the problem persists, it may be necessary to contact
a plumber.
ICE & WATER
TROUBLESHOOTING GUIDE
39
ICE & WATER
Problem Possible Causes Solutions
Ice has bad taste or
odor. Water supply contains minerals such
as sulfur. A water  lter may need to be installed to eliminate
taste and odor problems.
NOTE: In some cases, a  lter may not help. It may not
be possible to remove all minerals / odor / taste in all
water supplies.
Icemaker was recently installed. Discard the  rst few batches of ice to avoid discolored
or bad tasting ice.
Ice has been stored for too long. Ice that has been stored for too long will shrink,
become cloudy, and may develop a stale taste. Throw
away old ice and make a new supply.
The food has not been stored
properly in either compartment. Rewrap the food. Odors may migrate to the ice if
food is not wrapped properly.
The interior of the refrigerator needs
to be cleaned. See the Care and Cleaning section for more
information.
The ice storage bin needs to be
cleaned. Empty and wash the bin (discard old cubes). Make
sure that the bin is completely dry before reinstalling
it.
Dispensing warm
water. Refrigerator was recently installed. Allow 24 hours after installation for the water storage
tank to cool completely.
The water dispenser has been used
recently and the storage tank was
exhausted.
Depending on your speci c model, the water storage
capacity will range from approximately 20 to 30 oz
(0.6 - 0.9 liter).
Dispenser has not been used for
several hours. If the dispenser has not been used for several hours,
the  rst glass dispensed may be warm. Discard the
rst 10 oz (0.3 liter).
Refrigerator is connected to the hot
water supply. Make sure that the refrigerator is connected to a cold
water pipe.
WARNING: Connecting the refrigerator to a hot
water line may damage the icemaker.
Water has bad taste
or odor. Water supply contains minerals such
as sulfur. A water  lter may need to be installed to eliminate
taste and odor problems.
Water  lter has been exhausted. It is recommended that you replace the water lter:
• Approximately every 6 months.
• When the water  lter indicator turns on.
• When the water dispenser output decreases.
• When the ice cubes are smaller than normal.
Refrigerator was recently installed. Dispense 2.5 gallons (9.5 l) of water ( ush for
approximately 5 minutes) to remove trapped air and
contaminants from the system. Do not dispense the
entire 2.5 gallon (9.5 l) amount continuously. Depress
and release the dispenser pad for cycles of 30
seconds ON and 60 seconds OFF.
Icemaker is making
too much ice. Icemaker shuto (arm/sensor) is
obstructed. Empty the ice bin. If your icemaker is equipped with
an ice shuto arm, make sure that the arm moves
freely. If your icemaker is equipped with the electronic
ice shuto sensor, make sure that there is a clear path
between the two sensors. Reinstall the ice bin and wait
24 hours to con rm proper operation.
TROUBLESHOOTING GUIDE

Produkt Specifikationer

Mærke: Kenmore
Kategori: Køle-fryse-kombinationer
Model: 795.51869

Har du brug for hjælp?

Hvis du har brug for hjælp til Kenmore 795.51869 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Køle-fryse-kombinationer Kenmore Manualer

Kenmore

Kenmore 253.70419 Manual

13 Januar 2025
Kenmore

Kenmore 111.73022 Manual

12 Oktober 2024
Kenmore

Kenmore 106.51779 Manual

10 Oktober 2024
Kenmore

Kenmore 253.70413 Manual

14 Juli 2024
Kenmore

Kenmore 253.60082 Manual

14 Juli 2024
Kenmore

Kenmore 253.70502 Manual

14 Juli 2024
Kenmore

Kenmore 111.73302 Manual

13 Juli 2024
Kenmore

Kenmore 795.74105 Manual

12 Juli 2024
Kenmore

Kenmore 795.51869 Manual

10 Juli 2024
Kenmore

Kenmore 795.79022 Manual

10 Juli 2024

Køle-fryse-kombinationer Manualer

Nyeste Køle-fryse-kombinationer Manualer

Gorenje

Gorenje RCI4181AWV Manual

15 Januar 2025
Kelvinator

Kelvinator FR KDA 34 T Manual

15 Januar 2025
Indesit

Indesit TN 5 FNF (TK) Manual

15 Januar 2025
Kelvinator

Kelvinator FR KDA 29 S Manual

15 Januar 2025
Whirlpool

Whirlpool ET16JMXRWR3 Manual

15 Januar 2025
Samsung

Samsung RT29JSMSASZ Manual

14 Januar 2025
Hotpoint

Hotpoint LAO85 FF1I W Manual

14 Januar 2025
Samsung

Samsung SR-L709EV Manual

14 Januar 2025
Schaub Lorenz

Schaub Lorenz SL 210 SC DD Manual

14 Januar 2025
Bluesky

Bluesky BRC 318AS Manual

14 Januar 2025