Kicker 47KMFC11W Manual

Kicker Højttaler 47KMFC11W

Læs nedenfor 📖 manual på dansk for Kicker 47KMFC11W (9 sider) i kategorien Højttaler. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/9
EOP2020-CS2
5/17/2021
REV-A.2
47KMFC Mount Conguration Guide
Page of 1 9
The 47KMFC xed mounting system is designed to mount to at surface applications. The
four by 64mm) bolt pattern accepts multiple styles of fasteners providing ease of tment to 2.5” (
existing vehicles while also speeding assembly. The KMFC mount accepts either 5/16” or 8mm
bolts and nuts. Three bolting congurations are designed into the mount providing the customer
with options to best t their application:
Bolt-thru-mounting
Bolt- -mounting to
Stud mounting
This document addresses these congurations to provide insight into the capability of the KMFC
mounting system.
MOUNTING YOUR NEW ENCLOSURE
The use of at washers is suggested between the mounting surface and tightening
fastener. Loctite Threadlocker 271 (red) is not included but required for installation. The
following parts identied are included and required for mounting your new enclosure.
1. Electrical Connector
2. -18UNC hex nuts 5/16”
3. -18UNC hex head bolts 1½” long 5/16”
4. -18UNC socket head bolts 7/8” long 5/16
5. Vehicle Mount
6. Speaker Enclosure


Produkt Specifikationer

Mærke: Kicker
Kategori: Højttaler
Model: 47KMFC11W

Har du brug for hjælp?

Hvis du har brug for hjælp til Kicker 47KMFC11W stil et spørgsmål nedenfor, og andre brugere vil svare dig




Højttaler Kicker Manualer

Højttaler Manualer

Nyeste Højttaler Manualer