Klark Teknik DN100 V2 Manual


Læs nedenfor 📖 manual på dansk for Klark Teknik DN100 V2 (5 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/5
Quick Start Guide
DN100
Active DI Box with Extended Dynamic Range
V 1.0
(EN) Controls
(1) BALANCED LINKED INPUTS – Connect instruments or
line-level equipment to either the ¼" TRS or XLR inputs.
The other ¼" connector can be used as a link-through to
pass the signal to an amplier. When only the XLR input is
used, an impedance of 20 kΩ optimizes use with line-level
sources, otherwise a nominal impedance of 1 MΩ is ideal for
instrument pickups.
(2) OUTPUT – Send the signal to a mixer or recording interface
via balanced XLR cable.
(3) PAD – Press to reduce the input signal by 20 dB for use with
hot signals.
(4) EARTH – Press to separate the input and output grounds,
potentially eliminating earth/ground loops between
equipment on dierent mains supplies.
(5) 48 V LED – Lights when the unit receives sucient phantom
power. Note that the DN100 must be powered to operate
correctly.
(1)
(2) (3) (4) (5)


Produkt Specifikationer

Mærke: Klark Teknik
Kategori: Ikke kategoriseret
Model: DN100 V2

Har du brug for hjælp?

Hvis du har brug for hjælp til Klark Teknik DN100 V2 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Klark Teknik Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer