Klark Teknik PRO DI 20P Manual

Klark Teknik Ikke kategoriseret PRO DI 20P

Læs nedenfor 📖 manual på dansk for Klark Teknik PRO DI 20P (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/1

PRO DI 2 DI 20P

Passive Stereo DI Box with MIDAS Transformer and Extended Dynamic Range

IN/THRU – Connect your high-impedance source audio to the left and right ¼" TS jacks. Instrument-level, line-level and even speaker-level sources are accepted.

Each input jack has its own loop-through output. A common scenario allows an instrument to be connected to the input(s), and the Thru jack passes the signal to an ampli er while the

XLR output is sent to a mixing console.

A mono in / dual mono out can also be achieved by connecting a single ¼" cable to the left input, then using a short patch cable to connect the left thru jack to the right input. This will

send the single input source to both XLR outputs.

PAD – A -15 dB pad can be applied to each channel for very hot signals. This does not a ect the level of the thru jacks.

OUTPUTS – Send the inputs to a mixing console via balanced XLR cables.

EARTH LIFT – This switch may help reduce unwanted hum by removing the ground connection.

Speci cations

Inputs

Connectors 2 x ¼ " TS unbalanced

Impedance 10 kΩ/PAD , 500 kΩ/o

Max. input level 30 dBu @ 1 kHz

Outputs

Connector 2 x XLR, balanced

Impedance 150 Ω, 1 kHz

Max. output level 8.5 dBu @ 1 kHz

System

Frequency response 20 Hz to 30 kHz (± 1 dB)

THD + N (distortion) 0.01% @ 1 kHz, 0 dBu

Signal-to-noise ratio 108 dBu

Input pad -15 dB

Power requirement Passive

Physical

Dimensions (WxDxH) 118 x 112 x 64 mm

(4.6 x 4.4 x 2.5")

Weight 0.54 kg (1.2 lbs)

klarkteknik.com

LEGAL DISCLAIMER

MUSIC Group accepts no liability for any loss which may be su ered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein.

Technical speci cations, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. MIDAS, KLARK TEKNIK,

LAB GRUPPEN, LAKE, TANNOY, TURBOSOUND, TC ELECTRONIC, TC HELICON, BEHRINGER and BUGERA are trademarks or registered trademarks of MUSIC Group IP Ltd.

LIMITED WARRANTY

For the applicable warranty terms and conditions and additional information regarding MUSIC Group’s Limited Warranty, please see complete details online at

music-group.com/warranty.