KMA Machines Fuzzly Bear 2 Manual


Læs nedenfor 📖 manual på dansk for KMA Machines Fuzzly Bear 2 (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 8 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Quick Start Guide
Made in Berlin, Germany since 2013
Please follow us on social: @kmamachines
E-mail: hello@kma-machines.com | Website: www.kma-machines.com
© 2022 KMA Audio Machines UG & Co.KG
Quick Start Guide
Thank you for purchasing this FUZZLY BEAR 2 Sub Octave Generator.
We hope you get many years of pleasure and use from this device and
if this is your rst product from our brand, welcome!
This simple connecting guide should help start you on your journey to
sonic creativity. However, if you wish to know all of the pedal’s hidden
secrets, you can nd more info on the product page at:
kma-machines.com
Some quick usage examples:
Do you crave that sludgy, chunky FuzzTortion sound? Set the GAIN
control to 3 o’clock and adjust the Bias (SKIN/MEAT) control to noon,
then dial in the VOL to taste. For increasingly more compressed and
gated Fuzz tones, increase the BIAS control further towards the MEAT
or give the FUZZLY BEAR 2 an even thicker coat of fur, by turning the
GAIN further up, allowing the magic to happen when it is set fully
clockwise.
On the other hand, if synthy sputtery Fuzz is what you desire, the
FUZZLY BEAR 2 also has you covered. When the GAIN is set to max
and the Bias set fully to MEAT, it will rip your face off and you’ll get
almost a ghost octave, pseudo trumpety kinda vibe, perfect for the
classic tunes of yesteryear. Decrease the Bias setting for more gnarly
aggressiveness.
With its incredible range of tones, the FUZZLY BEAR 2 is also capable of
old school Overdrive sounds. Set the Bias towards SKIN and dial in the
GAIN around noon. If this is too much, instantly clean up the signal by
rolling off the instrument volume.
FUZZLY BEA R 2 QSG V1.02
FUZZLY BEAR 2 Main Specications
Modern re-imagining of the classic ‘Jordan Boss Tone’ Silicon-Fuzz
Vintage ‘70s Fuzz sounds
Tones ranging from sizzling and chunky overdriven tone
to a furry wall of fuzz
SKIN/MEAT knob - provides control over Bias
GAIN control - delivers a whole range of different fuzz shapes
Compact enclosure with top-mounted jacks - will t into any setup
True Bypass, with silent relay-based soft switching
Power requirements:
9 V DC, centre -, 2.1 mm, 35 mA max. current draw


Produkt Specifikationer

Mærke: KMA Machines
Kategori: Ikke kategoriseret
Model: Fuzzly Bear 2

Har du brug for hjælp?

Hvis du har brug for hjælp til KMA Machines Fuzzly Bear 2 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret KMA Machines Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Atlona

Atlona AT-DVIF30S-IR Manual

29 December 2024
Atlona

Atlona AT-PRO3HD66M Manual

29 December 2024
Atlona

Atlona AT-3GSDI500 Manual

29 December 2024
BlueBuilt

BlueBuilt BBMAG2M Manual

29 December 2024
Atlona

Atlona AT-3GSDI-14 Manual

28 December 2024
Atlona

Atlona AT-COMP10SS Manual

28 December 2024
Atlona

Atlona AT-2VGA300SL Manual

28 December 2024
Atlona

Atlona AT-HD-V216 Manual

28 December 2024
Atlona

Atlona AT-VGA11S Manual

28 December 2024
True

True TC900 Manual

28 December 2024