Kondator 935-PM91W Manual


Læs nedenfor 📖 manual på dansk for Kondator 935-PM91W (1 sider) i kategorien Strømskinne. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Removable installation
935-PM91W
935-PM91
Revised: 21
Drill
Drill a hole
in the table
Drill
Drill a hole
in the table
Removable
installation
Removable
installation
Permanent
installation
Permanent
installation
OPTIONAL
ATTACH AND INSERT (NON REMOVABLE)
Attach clips by guiding them into the side tracks.
The clips will keep the product in place without
the fastening nut.
Push the Powerdot all the way down the hole.
Lastly, plug the Powerdot in to the wall socket.
NOTE! Removing the product once inserted
can damage the table and /or the product.
HOW TO REMOVE (WITH CLIPS)
To minimize the risk of damaging the table
and/or product, turn the grommet clockwise
until the clips re-position and loosen up.
NOTE! Removing the product once inserted
can damage the table and /or the product.
INSERT (without clips)
Insert Powerdot into the hole
and feed the power plug through
the plastic fastening nut.
TURN CLOCKWISE & PLUG IN
Turn the plastic fastening nut as far
up the thread as possible.
Make sure that it has been thoroughly
tightened.
Lastly, plug the Powerdot in to the
wall socket.
PULL UPWARD
When the clips are loose, pull
the Powerdot upward until fully removed.
Permanent installation
1
x 1
x 2
- 1 USB Charger
(QC2.0 : 5V 2A /
9V 1.2A / 12V 1A)
- 1 Type B socket
/w 1800 mm cable


Produkt Specifikationer

Mærke: Kondator
Kategori: Strømskinne
Model: 935-PM91W

Har du brug for hjælp?

Hvis du har brug for hjælp til Kondator 935-PM91W stil et spørgsmål nedenfor, og andre brugere vil svare dig




Strømskinne Kondator Manualer

Strømskinne Manualer

Nyeste Strømskinne Manualer