La Crosse Technology 513-63867V2 Manual

La Crosse Technology Ur 513-63867V2

Læs nedenfor 📖 manual på dansk for La Crosse Technology 513-63867V2 (2 sider) i kategorien Ur. Denne guide var nyttig for 8 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Page 3 Page 4Page | 2
EXECUTIVE
ATOM I C CLO CK 2.0
MODEL: 51363867V2
DC: 080422
POWER UP
WWVB ATOMIC TIME SIGNAL
For more product information visit: bit.ly/laxtech_support
• The station will automatically search for the Atomic Time Signal
at power up and again at UTC 7:00, 8:00, 9:00, 10:00, and 11:00.
• Press and release the button to manually search for the
WWVB Atomic Time Signal.
• The Tower Icon will flash while searching, and be solid on
screen when the signal is received.
• For information about WWVB Atomic Time visit:
http://bit.ly/AtomicTime
FAHRENHEIT/CELSIUS SELECTION
Press the ºF/ºC button to select Fahrenheit or Celsius Temperature
display.
1. Install 2 AA batteries into your Outdoor Sensor.
2. Install 6 AA batteries into your Atomic Clock.
3. Once the sensor is reading to your clock, place it outside
in a shaded location to protect it from the sun’s heat.
See our mounting information: bit.ly/temp_mounting
TX141TH-Bv4
Outdoor Sensor 513-1429THv2
Atomic Clock
DESIRED H O UR ( TIME AD JUST)
SETTINGS
TIME ZONE
ATLANTIC
EASTERN
CENTRAL
MOUNTAIN
PACIFIC
ALASKA
HAWAII
1. Hold the button to enter the Settings Menu.
2. Use the + or - button to adjust values.
3. Press the button to confirm and move to next item.
4. Press the F/C button at any time to exit.
Settings order:
Language (English, Spanish, French, German)
Beep ON/OFF
Atomic ON/OFF
DST AUTOMATIC / DST ALWAYS OFF / DST ALWAYS ON
(Change Spring/Fall) (No change in Spring) (No change in Fall)
Time Zone
12/24 Format
• Hour
• Minutes
• Year
• Month
• Date
Month/Date or Date/Month
Notes:
The language selected in this menu will adjust the Weekday
readout and menu items.
If “Atomic OFF: is selected, menu will skip DST and Time Zone
settings and move straight to the 12/24 Hour Format setting.
Weekday sets automatically when Year, Month and Date are set.
Have your clock match other times around the world by setting a
Desired Hour, kept accurate by the Atomic time signal. only Note:
the hour can be changed.
Set Desired Hour:
1. Hold the button until the Hour flashes, “
Desired Hour
” will
show.
2. Press the + (PLUS) button to adjust the hour. Press the - (MINUS)
button to reset hour to “Local Time”.
3. Press the button to confirm and exit.
Switch between Desired Time and Local time:
• Press the button to switch between Desired Time and Local
Time.
• Desired Time is indicated with the icon.
Note: In the event of battery change or reset, these settings will
need to be readjusted.
VIEW LOCAL TIMESET DESIRED HOUR VIEW DESIRED HOUR


Produkt Specifikationer

Mærke: La Crosse Technology
Kategori: Ur
Model: 513-63867V2

Har du brug for hjælp?

Hvis du har brug for hjælp til La Crosse Technology 513-63867V2 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ur La Crosse Technology Manualer

Ur Manualer

Nyeste Ur Manualer