La Crosse Technology 5131311 Manual

La Crosse Technology Ur 5131311

Læs nedenfor 📖 manual på dansk for La Crosse Technology 5131311 (2 sider) i kategorien Ur. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

INTRODUCTION:

The Analog- Digital Atomic Clock features atomic (radio-Style

controlled) time and date, indoor temperature/humidity, week

of . Tap or wave your hand past the motion sensor the year

under LCD to change the . display options

ANALOG-STYLE DIGITAL CLOCK: ATOMIC

SETUP INSTRUCTIONS:

Note: Setup is most eective at night when the WWVB radio-

controlled time/date signal is strongest.

1. Slide the /ON/OFF switch to ON.

2. Remove battery cover from the back of the Analog-Style

Digital Atomic Clock. Slide tab down and pull out to remove

the cover.

3. Insert four NEW AA batteries (not included) into the Analog-

Style Digital Atomic Clock. Observe the correct polarity (see

marking inside the battery compartment).

4. Do not touch buttons for 15 minutes while the clock

searches for the WWVB time signal.

Important:

• Do NOT mix old and new batteries.

• Do Not Mix Alkaline, Standard, Lithium or Rechargeable

Batteries

PROGRAM MENU -BY- STEP STEP:

STEP 1:

TIME ZONE Hold the /SET button for 2 seconds to enter the

program menu.

Press and release the

+ button to select a dierent Time Zone:

o = Newfoundland NST

o = Atlantic AST

o = Eastern EST

o = Central CST

o = Mountain MST

o Pacic PST=

o AKST= Alaska

o = Hawaiian time zone. HAT

D SAVING TIME INDICATOR AYLIGHT : Press the– button to

select DST. The letters DST will appear in the upper right

corner. Conrm time zone and DST setting with the /SET

button and move to step 2.

STEP 2:

LANGUAGE: EN (English) will ash. Use the + or button to –

select the languag e for the day of the week:

o (English) EN

o DE (German)

o FR (French)

o (Italian) IT

o (Spanish) ES

o (Dutch) NE

o (Russian). RU

Conrm with the /SET button and move to step 3.

STEP 3:

YEAR: The year will ash. Press and release the + or button –

to select the correct year. Conrm with the /SET button and

move to step 4.

STEP 4:

MONTH/DATE: The month and date will ash. Press and

release the + or button to select the correct month and date. –

Hold the button to change the digits quickly. Conrm with the

/SE button and move to step 5. T

Note: The Day of the Week will set automatically after the

year, month and date are set.

STEP 5:

TIME: The hours and minutes together. Press and will flash

release the + or button to select the correct time. Hold the –

button to change the digits quickly. Conrm with the /SET

button and move to step 6.

STEP 6:

12/24 HOUR 12H will ash. Press and release the +button to

select 24-hour time.

Note: In 12-hour time, the PM indicator will show during

afternoon hours.

FAHRENHEIT/CELSIUS: Press and release the

- button to

select Fahrenheit of Celsius. Conrm with the /SET button

and exit.

Note: The Analog-Style Digital Atomic Clock will return to

active display after 30 seconds with no buttons pressed. The

clock will reflect whatever adjustments made before it timed

out.

CHANGE DISPLAY MODES: The clock will digitally display

dierent options in the lower portion of the LCD. A simple tap

or wave over the motion sensor on the front of the clock slow

below the LCD change the display. will

• : and release (1 One change of display mode Tap

second), or slowly Wave of your hand over the motion

sensor (must be within .75" / 2 cm of sensor) to change the

display one time.

• Repeat the tap or slow wave to change again. The display

will stay on the last change.

• : Display modes

o Calendar (weekday, month, date)

o Indoor temperature / humidity

o week of the year (Mon-Sun view) Work

o Digital time and weekday

Note: Tap or Wave very , within .75" (2 cm) slowly from motion

sensor to change the display.

Auto-scrolling display:

The clock will default to auto-scrolling through the display

options. When in auto-scroll this symbol will appear in >>>

front of the display.

Turn o the auto-scroll by (3 seconds) or slowly tap and hold

wave over the motion sensor for 3 seconds. The symbol >>>

will disappear and the clock will stay on the current display.

Analog- Style Digital Atomic Clock

with motion sensor that changes display options

Model: 513-1311 | Quick Setup Guide

WAVE TAP

Produkt Specifikationer

Mærke:	La Crosse Technology
Kategori:	Ur
Model:	5131311

Har du brug for hjælp?

Hvis du har brug for hjælp til La Crosse Technology 5131311 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ur La Crosse Technology Manualer

La Crosse Technology WT-8005U Manual

5 December 2024

La Crosse Technology WS-811561-W Manual

5 December 2024

La Crosse Technology WS-8117U-IT-C Manual

5 December 2024

La Crosse Technology WT-3144S Manual

5 December 2024

La Crosse Technology 512-807 Manual

5 December 2024

La Crosse Technology WT-3122A Manual

5 December 2024

La Crosse Technology WT-3161WHX1 Manual

3 Oktober 2024

La Crosse Technology 512-65937 Manual

3 Oktober 2024

La Crosse Technology 404-3841B Manual

1 Oktober 2024

La Crosse Technology 404-3556A Manual

21 September 2024

Ur Manualer

Nyeste Ur Manualer

Michael Kors Access Runway Gen 4 Display MKT5052 Manual

9 December 2024

Michael Kors Access Runway Gen 4 Display MKT5053 Manual

9 December 2024

Michael Kors Access Runway Gen 4 Display MKT5046 Manual

9 December 2024

Michael Kors Access Runway Gen 4 Display MKT5048 Manual

9 December 2024

Michael Kors Access Runway Gen 4 Display MKT5049 Manual

9 December 2024

Michael Kors Access Runway Gen 4 Display MKT5045 Manual

9 December 2024

Michael Kors Access Runway Gen 4 Display MKT5050 Manual

9 December 2024

Michael Kors Everest Manual

9 December 2024

Michael Kors Chronograph Brecken Manual

9 December 2024

Michael Kors Cortland Manual

9 December 2024