Lancom 1900EF-5G Manual

Lancom Router 1900EF-5G

Læs nedenfor 📖 manual på dansk for Lancom 1900EF-5G (2 sider) i kategorien Router. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

T E C H N I C A L D E T A I L S

M O U N T I N G A N D C O N N E C T I N G T H E D E V I C E

LANCOM 1900EF-5G

Quick Reference Guide

C ud eadylo -r

*) The additional power LED statuses are displayed in 5-seconds

rotation if the device is configured to be managed by the LANCOM

Management Cloud.

Please observe the following when setting up the device

AThe mains plug of the device must be freely accessible.

AFor devices to be operated on the desktop, please attach the adhesive rubber

footpads.

ADo not rest any objects on top of the device and do not stack multiple devices.

A Keep the ventilation slots on the side of the device clear of obstruction.

AMount the device into a 19” unit in a server cabinet using the provided screws and mounting brackets.

Pay attention to the “R” and “L” marks on the brackets for accurate mounting.

POWER

LANCOM 1900EF-5G

SIM

a db c

d ETH 1 - ETH 4

Green, orange off No networking device connected

Green, permanently Connection to network device operational,

no data traffic

Green, flickering Data transmission

Orange off 1000 Mbps

Orange, permanently 10 / 100 Mbps

c WAN 1 / WAN 2

Green, orange off No networking device connected

Green, permanently Connection to network device operational,

no data traffic

Green, flickering Data transmission

Orange off 1000 Mbps

Orange, permanently 10 / 100 Mbps

b RESET

Reset button short press > Restart the device

long press > Reset the device

Hardware

Power supply Internal power supply unit (100–240 V, 50-60 Hz)

Power consumption Max. 27 W

Environment Temperature range 0–40 °C, humidity 0–95 %; non-condensing

Housing Robust metal housing, 1 HU with mounting brackets for 19“ installation,

345 x 44 x 253 mm (W x H x D)

Number of fans 1 quiet fan

Interfaces

WAN 1 / WAN 2 WAN 1 SFP: Compatible with optional LANCOM SFP modules. Set as a WAN port ex-factory,

can be configured as a LAN port.

WAN 1 / WAN 2 TP: 10 / 100 / 1000 Base-TX, autosensing full duplex (WAN 1) / autosensing

(WAN 2), auto node hub

ETH1 - ETH 4 4 individual ports, 10 / 100 / 1000 Mbps Gigabit Ethernet, by default set to switch mode.

Up to 3 ports can be operated as additional WAN ports. Ethernet ports can be electrically

disabled in the LCOS configuration.

Config (Com) / V.24 Serial configuration interface / COM-port: 9,600 - 115,200 baud

USB USB 2.0 hi-speed host port for connecting USB printers (USB print server), serial devices (COM-

port server) or USB drives (FAT file system)

5G Four SMA connectors for the supplied dipole rod antennas, compatible LANCOM AirLancer

antennas for 5G, 4G, or from other manufacturers. Please respect the restrictions which apply

in your country when setting up an antenna system (particularly antenna gain / transmission

power).

WAN protocols

Ethernet PPPoE, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and IPoE (with or without DHCP), RIP-1, RIP-

2, VLAN, GRE, EoGRE, L2TPv2 (LAC or LNS), IPv6 over PPP (IPv6 and

IPv4/IPv6 dual stack session), IP(v6)oE (autoconfiguration, DHCPv6 or static)

Data transmission in cellular networks - supported standards and power (dBm)

LTE /

LTE Advanced

Band 1: 24.0; band 3: 24.8; band 7: 24.8; band 8: 24.0; band 20: 24.0; band 34: 24.0;

band 38: 24.8; band 40: 24.8; band 42: 24.8

5G NR n1: 24.0; n3: 24.0; n28: 24.0; n41: 24.0; n77: 24.5; n78: 24.5

Declaration of Conformity

Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in

compliance with Directives 2014/30/EU, 2014/53/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006.

The full text of the EU Declaration of Conformity is available at the following Internet address:

www.lancom-systems.com/doc

Package content

Documentation Quick Reference Guide (DE/EN), Installation Guide (DE/EN)

Cables 1 Ethernet cable, 3 m (kiwi colored connectors); 1 Ethernet cable, 3 m (green connectors);

1 IEC power cord 230 V (not for WW devices)

Antennas Four 5G/4G antennas for 5G/LTE

Mounting brackets Two 19” brackets for rack mounting

a5G antenna connectors

Connect the supplied cellular antennas to the connectors

MAIN / AUX or MIMO1 / MIMO2 at the front of the device.

bWAN 1 interfaces (SFP / TP combo port)

Insert a suitable SFP module (e.g. 1000Base-SX or 1000Base-LX)

into the SFP port. Choose a cable compatible with the SFP module

and connect it as described in the module’s documentation. SFP

modulel and cable are not included.

If desired, alternatively connect the WAN 1 TP interface to a WAN

modem using the provided Ethernet cable with green connectors.

cWAN 2 interface (TP)

Connect the WAN 2 interface to a WAN modem using the provided

Ethernet cable with green connectors.

dEthernet interface

Use the cable with the kiwi-colored connectors to connect one of

the interfaces ETH 1 to ETH 4 to your PC or a LAN switch.

eSIM card slot

Slide the SIM card into the SIM card slot using the marker to

ensure that the card is the right way round. Ensure that the SIM

card clicks into place on insertion. To remove the card from the

device, press the card lightly into the device.

Let go to release the SIM card from the slot. SIM

fConfiguration interface

Use the included serial configuration cable to connect the serial

interface (COM) to the serial interface of the device you want to

use for configuring / monitoring.

gUSB interface

You can use the USB interface to connect a USB printer or a

USB storage device.

Power connector and grounding point (device back side)

Supply power to the device via the power connector. Please

use the IEC power cable supplied (separately available for WW

devices).

ATTENTION: High touch current possible! Connect to earth

before connecting the power supply.

Warning! High touch current.

Connect to earth before

connecting the power supply.

LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. This docu-

ment contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors and / or omissions. 111994/12/21