TP-Link Archer BE550 Pro Manual

TP-Link Router Archer BE550 Pro

Læs nedenfor 📖 manual på dansk for TP-Link Archer BE550 Pro (4 sider) i kategorien Router. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/4
LED Explanation
You can check the router’s working status by
following the LED Explanation.
Button Explanation
1. Connect your device to the router wirelessly or
with an Ethernet cable.
Let’s Get Started
http://tplinkwi.net
Method TWO: Via a Web Browser
2. Launch a web browser and enter
http://tplinkwifi.net http://192.168.0.1 or in
the address bar. Create a password to log in.
3. Follow the step-by-step instructions to set up
the internet connection and register for the
TP-Link Cloud service.
Note: If the login window
does not appear, please
refer to Q2 of Need Help?
in this guide.
Method ONE: Via the TP-Link Tether App
1. Download the Tether app.
Scan for Tether Tether
or
3. Tap the button in the Tether app, select
Wireless Router, and find your model.
Follow the steps to complete the setup
and connect to the internet.
2. Open the Tether app and log in with your
TP-Link ID.
Note: If you don’t have an account, create one first.
To enjoy a more complete
service from TP-Link, bind
your TP-Link ID to the router.
The default wireless
network names (SSIDs) and
password are printed on
the label at the back of the
router.
Wireless Password/PIN:XXXXXXXX
SSID:TP-Link_X XXX
SSID:TP-Link_X XXX_5G
SSID:TP-Link_X XXX_6G
Set Up the Network
2
Three physical buttons are located on the front
of the router.
Press the WPS button, and immediately press the WPS
button on your client device to start the WPS process.
Press the LED button to turn on or off the LED of your router.
Press and hold this button for about 2 seconds to turn on or
off the wireless function of your router.
LED ButtonWi-Fi ButtonWPS Button
Wait until the LED is solid on
(LED Exclamation Point or All
LEDs).
4
O Power is o or the LED is turned
o.
Blinking Wi-Fi is o.
Blinking The router is disconnected from
the internet, and Wi-Fi is o.
Solid The router is disconnected from
the internet.
Blinking Establishing a WPS connection.
Solid The router is working normally.
Cycling
The system is starting up or the
router is being upgraded. Do not
disconnect or power o your router.
All LEDs
Top 10 LEDs
LED Exclamation Point
LED Exclamation Point
All LEDs
Connect the powered-off modem to one of the WAN/LAN ports with an Ethernet cable.
1
Power on the modem, and then wait about
2 minutes for it to restart.
Unplug the power to turn o your modem, if any, and remove the backup battery if it has one.
• Keep the router vertical while working. Refer to Q5 of Need Help? to place the router for optimal
Wi-Fi performance. Modem
Unplug the power
If your internet comes from an Ethernet outlet instead of a DSL / Cable / Satellite modem, connect the router’s
WAN/LAN port to it, and then follow steps 3 and 4 to complete the hardware connection.
*Images may dier from your actual
products.
Internet
3Connect the power adapter to the router.
Then press the turn Power button to
on the router.
Choose Your Device Type
Gaming Router
Range Extender
Wireless Router
Note: Due to Tether app updates, your actual user
interface and pathway may differ from those
depicted here.
1Connect the Hardware
Or
Note: If you want to change the WAN/LAN port for internet service, refer to in this guide.Q1 of Need Help


Produkt Specifikationer

Mærke: TP-Link
Kategori: Router
Model: Archer BE550 Pro

Har du brug for hjælp?

Hvis du har brug for hjælp til TP-Link Archer BE550 Pro stil et spørgsmål nedenfor, og andre brugere vil svare dig




Router TP-Link Manualer

Router Manualer

Nyeste Router Manualer