Lancom LX-7500 Manual


Læs nedenfor 📖 manual på dansk for Lancom LX-7500 (4 sider) i kategorien Adgangspunkt. Denne guide var nyttig for 17 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/4
Hardware Quick Reference
Mounting & connecting
LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their
owners. This document contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors
and / or omissions. 0824
Before initial startup, please make sure to take notice of the information regarding the intended use in the
enclosed installation guide!
Please note that support for third-party accessories is not provided.
Please observe the following when setting up the device
Donotplaceanyobjectsonthetopofthedeviceorstackseveraldevices
Lockablewallandceilingmountingusingthesuppliedwallmount
i
LANCOM LX-7500
Wall mounting
Depending on the wall material structure, select 4 suitable pan
head screws M4x35 and, if necessary, suitable dowels for
mounting the retaining plate on a sufficiently load-bearing
wall.
Mount the retaining plate ➁ ➀ with the screws through the
holes marked in the illustration to the wall.
The access point is already prepared for mounting on the
mounting plate.
Insert the access point into the mounting plate so that the locking
mechanisms on the device and mounting plate are opposite each
other and the screws M6x10 already pre-assembled on the
device reach into the keyhole-shaped recesses of the retaining
plate. Then push the device towards the locking mechanism up
to the stop.
Ensure that the appliance is locked by tightening the locking
screw in the direction of the device and then turn it 9
clockwise.
To remove the device, turn the locking screw 90°
counterclockwise and pull it away from the device. The device
can now be removed from the retaining plate in the opposite
direction to the locking direction.
Ceiling mounting
Depending on the ceiling material structure, select 4 suitable
pan head screws M4x35 and, if necessary, suitable dowels
for mounting the retaining plate on a sufficiently load-bearing
ceiling.
Mount the retaining plate ➁ ➀ with the screws through the
holes marked in the illustration to the ceiling.
The access point is already prepared for mounting on the
mounting plate.
Insert the access point into the mounting plate so that the locking
mechanisms on the device and mounting plate are opposite each
other and the screws M6x10 already pre-assembled on the
device reach into the keyhole-shaped recesses of the retaining
plate. Then push the device towards the locking mechanism up
to the stop.
Ensure that the appliance is locked by tightening the locking
screw in the direction of the device and then turn it 9
clockwise.
To remove the device, turn the locking screw 90°
counterclockwise and pull it away from the device. The device
can now be removed from the retaining plate in the opposite
direction to the locking direction.
➃ ➂
USB 3.0 interface
Connect compatible USB devices to the USB interface either
directly or via a suitable USB cable.
Kensington Lock holder
For mechanical theft protection of the access point
Reset button
Pressed up to 5 seconds: Device restart
Pressed longer than 5 seconds:
Configuration reset and device restart
RESET
TP-Ethernet interfaces ETH1 / ETH2
Connect the ETH1 or ETH2 interfaces to other network
components using suitable Ethernet cables.
➁ ➃


Produkt Specifikationer

Mærke: Lancom
Kategori: Adgangspunkt
Model: LX-7500

Har du brug for hjælp?

Hvis du har brug for hjælp til Lancom LX-7500 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Adgangspunkt Lancom Manualer

Lancom

Lancom LX-7500 Manual

6 September 2024
Lancom

Lancom LX-7300 Manual

6 September 2024
Lancom

Lancom LN-862 Manual

30 August 2024
Lancom

Lancom LX-6400 Manual

16 August 2024
Lancom

Lancom LW-500 Manual

16 August 2024
Lancom

Lancom OW-602 Manual

15 August 2024
Lancom

Lancom LN-1702B Manual

15 August 2024
Lancom

Lancom OX-6400 Manual

14 August 2024
Lancom

Lancom LW-600 Manual

13 August 2024
Lancom

Lancom LX-6402 Manual

10 August 2024

Adgangspunkt Manualer

Nyeste Adgangspunkt Manualer