LC-Power LC-CC-124-ARGB-TB Manual

LC-Power Processorkoeler LC-CC-124-ARGB-TB

Læs nedenfor 📖 manual på dansk for LC-Power LC-CC-124-ARGB-TB (1 sider) i kategorien Processorkoeler. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Step 1- Installation
1. Remove the transparent sheet from the cooler and the CPU bottom.
Now spread some thermal paste evenly on the CPU.
2. Clip two sides to each corresponding bracket.
3. Connect the cooler fan and the illuminated outer ring to the mainboard.
Step 2- Fan and wire connection
1. Connect the 4pin PWM connector to the mainboard -> “CPU FAN”
2. Connect the 3 pin digital RGB fan cable (B) with the mainboard.
Consult your mainboard manual to locate the position of the RGB connector on
your mainboard. Colours and modes can be controlled via the mainboard's RGB
software (digital RGB/ARGB).
B
CD
A
LGA775 LGA115X
CPU thermal paste
CPU
Intel
AMD AMD AM2/AM2+/AM3/AM3+/AM4 FM1/FM2/
TM
Silent Power Electronics GmbH,
Formerweg 8, 47877 Willich,
Germany, www.lc-power.com,
Email: support@lc-power.com
TM
LC-CC-124-ARGB-TB
thermal paste
3. Some mainboards need the digital RGB adapter cable (D) which must be connected
between the 3 pin RGB fan cable (B) and the mainboard itself.
So connect the adapter (C) to the 3 pin digital RGB fan cable (B). And now (D) to
the mainboard.


Produkt Specifikationer

Mærke: LC-Power
Kategori: Processorkoeler
Model: LC-CC-124-ARGB-TB

Har du brug for hjælp?

Hvis du har brug for hjælp til LC-Power LC-CC-124-ARGB-TB stil et spørgsmål nedenfor, og andre brugere vil svare dig