LD Systems LDI02 Manual

LD Systems Ikke kategoriseret LDI02

Læs nedenfor 📖 manual på dansk for LD Systems LDI02 (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/1
EC DECLARATION OF CONFORMITY
These devices meet the essential requirements and further relevant specifications of Directive 2004/108/EC (EMC).
For more information, see www.adamhall.com.
CORRECT DISPOSAL OF THIS PRODUCT (ELECTRICAL WASTE)
(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes
at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste
disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of
material resources.
Household users should contact either the retailer where they purchased this product, or their local government of fice, for
details on where and how they can recycle this item in an enviromentally friendly manner.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product
should not be mixed with other commercial wastes for disposal.
WEEE-DECLARATION
Your LD Systems product was developed and manufactured with high quality materials and components wich can be
recycled and/or reused. This symbol indicates that electrical and electronic equipment must be disposed of separately
from normal waste at the end of its operational lifetime.
Please dispose of this product by bringing it to your local collection point or recycling centre for such equipment. This will
help to protect the environment in which we all live.
REQUESTING WARRANTY-SERVICE
To request warranty service for the product, contact Adam Hall or the Adam Hall authorized reseller from which
you purchased the product.
BATTERIES AND ACCUMULATORS
The supplied batteries or rechargeable batteries can be recycled. Please dispose of them as special waste or return
them to your specialist dealer. In order to protect the environment, only dispose exhausted batteries.
ECOLOGY AND ENERGY SAVING
Saving electric energy helps to protect the environment. Please turn off all electrical equipment when it is not in
use. To avoid power consuption in idle mode, disconnect all electrical equipment from mains when not in use.
LIMITATION OF LIABILITY
If your Adam Hall branded hardware product fails to work as warranted above, your sole and exclusive remedy
shall be repair or replacement. Adam Halls’ maximum liability under this limited warranty is expressly limited
to the lesser of the price you have paid for the product or the cost of repair or replacement of any hardware
components that malfunction in conditions of normal use.
Adam Hall is not liable for any damages caused by the product or the failure of the product, including any lost
profits or savings or special, incidental, or consequential damages. Adam Hall is not liable for any claim made by
a third party or made by you for a third party.
This limitation of liability applies whether damages are sought, or claims are made, under this Limited Warranty
or as a tort claim (including negligence and strict product liability), a contract claim, or any other claim. This limitation
of liability cannot be waived or amended by any person. This limitation of liability will be effective even if
you have advised Adam Hall of an authorized representative of Adam Hall of the possibility of any such damages.
This limitation of liability however, will not apply to claims for personal injury.
This Limited Warranty gives you specific legal rights. You may also have other rights that may vary from state to
state or from country to country. You are advised to consult applicable state or country laws for a full determination
of your rights.
WWW. .COMLD-SYSTEMS LDI02
Active DI-Box
THANK YOU FOR CHOOSING LD SYSTEMS!
We have designed this product to operate reliably over many years. Therefore LD Systems guarantees for high
quality products with its name and many years of experience as a producer.
Please take a few moments to read these instructions carefully, as we want you to enjoy your new LD Systems
products quickly and to the fullest.
For information about LD Systems check out our website WWW.LD-SYSTEMS.COM
PREVENTIVE MEASURES
1. Please read this information carefully.
2. Keep all information and instructions in a safe place.
3. Please follow the instructions.
4. Please observe all warnings. Don‘t remove safety instructions or any other information located on the device.
5. Use the device only in the intended manner.
6. Use only stable and appropriate stands and/or mounts when the device is permanently installed. Make certain
that wall brackets are firmly secured. Make certain that the unit is installed securely and cannot fall down.
7. When installing please observe the corresponding safety standards for your country.
8. Do not install the device near radiators, heat accumulators, ovens or other sources of heat. Make certain that
the device is always installed so that is cooled sufficiently and cannot overheat.
9. Do not place open sources of ignition, e.g., burning candles, on the device.
10. Do not cover ventilation slots.
11. Do not operate the device in the immediate vicinity of water. Do not expose this equipment to combustible
materials, liquids or gases.
12. Please make certain that dripping or splashing water cannot get inside the device. Do not put objects filled
with fluids, such as vases or drinking vessels, on top of the device.
13. Make certain that objects cannot fall into the device.
14. Use the device only with accessories with which the manufacturer intends the device to be used.
15. CAUTION: If this device has a mains connector equipped with protective earth, it must be connected to a
mains socket with a protective ground connection. Never disable the function of the protective ground connection
of the included power cord.
16. Do not turn on the device immediately if it was exposed to strong temperature fluctuations (for example after trans-
portation). Moisture and condensation may damage the device. Leave the device switched off until it has reached room
temperature.
17. Do not open the device and do not make any changes to the device.
18. Before connecting to mains power, make certain that the mains voltage and the mains frequency are the same as the
operating values of the device (see type label). If the device is equipped with a supply voltage selector switch, make certain
that the values of the device match the values of the mains power before connecting. If the plug on the included cord does
not fit your mains outlet, contact your electrician.
19. Make certain that the power cord is not stepped on. Protect the power cord against pinching, especially at the device
plug and the power plug.
20. In order to prevent damage or accidents, for example, due to tripping hazards, check all connections once you have
connected the device.
21. When connecting the device, make certain that the power plug remains readily accessible.
Always pull out the power plug when the device is not in use or when you clean the device. Disconnect the power cord by
pulling the plug not the cable. Never touch the power cable and power adapter with wet hands.
22. Avoid switching the device on and off at short intervals, because it may shorten the durability of the device.
23. IMPORTANT: Replace fuse only by fuse of same type and rating! If fuse blows repeatedly please contact
authorized service center!
24. In order to disconnect the device completely from the mains voltage, the power plug must be unplugged.
25. If your device is equipped with a Volex power connector, the matching Volex device plug must be unlocked in order to
disconnect it. This also means that a tug on the power cord can pull the device out of place, thus causing personal injuries
and/or property damage. Thus please make certain to route your cables carefully.
26. If there is a risk of lightning strike or during extended periods of disuse, unplug the power plug.
27. During transport, make certain that the equipment being transported cannot fall down and possibly cause personal
injuries and/or property damage.
28. If your device no longer works properly, if it has been exposed to liquids or an object has fallen inside it or if it has been
damaged in some other manner, turn the device off immediately und unplug the power plug. This device should be repaired
only by authorized experts.
29. Use only a dry cloth to clean the device.
30. Comply with all of the disposal laws that are applicable in your country. During disposal, please separate plastic and
paper/cardboard.
31. Plastic bags must be kept out of the reach of children.
LD SYSTEMS LDI02 ACTIVE DI-BOX
The LD Systems LDI02 active DI-Box takes high impedance, unbalanced signals, such as guitar and bass signals
and converts them to low impedance, balanced signals. As a consequence a balanced microphone input of a
mixing board or an audio interface can be used without unwanted background noise.
It provides a PAD switch, which reduces the gain by 20 dB if needed and a Ground Lift which can help to prevent
ground loops or humming noise. The LDI02 can be operated either with a 9 V battery or phantom power.
CONTROLS, INDICATORS AND CONNECTORS
1
23
4
5
6
7
89
1
Unbalanced XLR input.
2
Unbalanced 6.3 mm jack input.
3
Unbalanced link output 6.3 mm jack.
4
Activating the PAD switch results in a gain reduction of 20 dB.
5
Balanced XLR output.
6
Switching to LIFT breaks the ground connection between in- and output. This can help to prevent ground loops or
humming noise.
7
Power On / Off switch
8
LED blinks during operation with 9 V battery. LED is constantly on when operating with phantom power.
9
Battery compartment (9 V battery not included)
SPECIFICATIONS
Frequency response: 20 Hz - 20 kHz
THD: < 0.0015 % at 1 kHz
Signal-to-noise ratio: 107,5 dB
Input impedance: 1 MOhm
Output impedance: <100 Ohm
Input: (unbalanced): 6.3 mm mono jack, XLR (unbalanced)
Link output:(unbalanced): 6.3 mm mono jack (unbalanced)
Output: balanced XLR
Maximum input level: +10 / +30 dBu
FEATURES
· Unbalanced 6.3 mm jack and XLR input
· Link output
· -20 dB PAD
· Ground lift
· Balanced XLR output
· Battery or phantom power operation
CAUTION! HIGH VOLUME!
This product is designed for professional use. Therefore the commercial use of this equipment
is liable to the rules and regulations of the Accident Prevention & Insurance Association of your industry sector.
Adam Hall as a manufacturer is bound to inform you formally about the existence of eventual sanitary risks. Risk of hearing
damage due to prolonged exposure to excessive volumes: When using this product high sound pressure levels (SPL) can be
generated, sufficient to cause permanent hearing damage to performers, production crew and audience members. Caution
should be taken to avoid prolonged exposure SPL in excess of 90 dB.
LIMITED WARRANTY
This Limited Warranty applies to the Adam Hall, LD Systems, Defender, Palmer, Cameo and Eminence branded
products.
The statutory warranty rights towards the seller are not affected by this guarantee. In fact, it justifies, additional
independent warranty claims towards Adam Hall.
Adam Hall warrants that the Adam Hall product you have purchased from Adam Hall or from an Adam Hall autho-
rized reseller is free from defects in materials or workmanship under normal use for a period of 2 years from the
date of purchase.
The Limited Warranty Period starts on the date of purchase. In order to receive warranty services you are required
to provide proof of the purchase date. Your dated sales or delivery receipt, showing the date of purchase, is your
proof of the purchase date. Should products of the brands named above be in need of repair within the limited war-
ranty period, you are entitled to warranty services according to the terms and conditions stated in this document.
This Limited Warranty extends only to the original purchaser of this Adam Hall branded product and is not trans-
ferable to anyone who obtains ownership of the Adam Hall branded product from the original purchaser. During
the Limited Warranty Period, Adam Hall will repair or replace the defective component parts or the product. All
component parts or hardware products removed under this Limited Warranty become the property of Adam Hall.
In the unlikely event that your Adam Hall product has a recurring failure, Adam Hall, at its discretion, may elect to
provide you with a replacement unit of Adam Hall´s choice that is at least equivalent to your Adam Hall branded product
in hardware performance.
Adam Hall does not warrant that the operation of this product will be uninterrupted or error-free. Adam Hall is not
responsible for damage that occurs as a result of your failure to follow the instructions included with the Adam Hall
branded product.
This Limited Warranty does not apply,
- to wear parts (e.g. accumulator)
- to any product from which the serial number has been removed or that has been damaged or rendered defective
as the result of an accident
- in case of, misuse, abuse, or other external causes - by operation outside the usage parameters stated in the
user´s documentation shipped with the product by use of spare parts not manufactured or sold by Adam Hall
- by modification or service by anyone other than Adam Hall
These terms and conditions constitute the complete and exclusive warranty

Produkt Specifikationer

Mærke: LD Systems
Kategori: Ikke kategoriseret
Model: LDI02

Har du brug for hjælp?

Hvis du har brug for hjælp til LD Systems LDI02 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret LD Systems Manualer

LD Systems

LD Systems ICOA 15 PC Manual

5 August 2024
LD Systems

LD Systems LDI02 Manual

28 Juli 2024
LD Systems

LD Systems LDSPS16 Manual

21 Juli 2024
LD Systems

LD Systems U308 BPW Manual

5 Marts 2024
LD Systems

LD Systems FX 300 Manual

31 December 2023
LD Systems

LD Systems U 300 RK Manual

23 November 2023
LD Systems

LD Systems Maui G2 Manual

15 September 2023
LD Systems

LD Systems ICOA 12 PC Manual

8 September 2023
LD Systems

LD Systems ZONE 423 Manual

29 November 2022
LD Systems

LD Systems VIBZ 24 DC Manual

12 November 2022

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Snom

Snom HD300A Manual

4 November 2024
Atlona

Atlona NETGEAR-AXM Manual

4 November 2024
Sanus

Sanus VMF822 Manual

4 November 2024
Sanus

Sanus VLF828 Manual

4 November 2024
Sanus

Sanus VSF817 Manual

4 November 2024
BEKO

BEKO BHCP65422BCH Manual

4 November 2024
Blaupunkt

Blaupunkt GG3010 Manual

4 November 2024
Blaupunkt

Blaupunkt BP-YF07D Manual

4 November 2024
Blaupunkt

Blaupunkt GG6010 Manual

4 November 2024
Native Instruments

Native Instruments Kithara Manual

4 November 2024