Lenco Sportcam-200 Manual

Lenco Videokamera Sportcam-200

Læs nedenfor 📖 manual på dansk for Lenco Sportcam-200 (4 sider) i kategorien Videokamera. Denne guide var nyttig for 22 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/4

Sportcam-200 Camera User Manual

1. Key Features

• Record max 1080p FHD video by using one easy slide switch

• Take 5 MP digital photographs

• Accept MicroSD card and allows you to take FHD videos for 2.5 hours with 32GB

memory.

• Built-in 1050mAh Li-ion battery for around 3 hours continuously use

• Waterproof up to 10 meters depth without using extra casing

2. Package Contents

Carefully unpack the package and ensure that you have the following items:

1 6 Camera body CamLocker Key

2 Back Cover 7 CamLocker Socket - Ball Joint

3 Mini USB cable 8 Bike Mount

4 Secure strap 9 Carry Bag

5 CamLocker 10 User Manual

3. Functional Parts

1 Cover Lens High quality lens

2 LED indicator Show the camera status

3 Power / Shutter Button 1. Turn the camera on or off

2. Take single photograph

4 Record & Stop Slide Switch Slide to start or stop video recording

5 Cam Back Cover Rotate to seal the camera

6 Tripod Socket Accept CamLocker or other mount using similar

tripod screw

7 Strap Vent Loop with wrist or secure strap

8 Cover latch Lock the back cover

9 Micro HDMI terminal Connect the camera to TV via HDMI cable

10 Video Resolution Slide

Switch Select video resolution: FHD or HD

11 MicroSD Card Slot Micro SD card storage location.

12 Reset Reset the camera

13 Mini USB Slot

1. Connect to computer for data transfer or

camera setup

2. Charge your camera

4. Using the Camera

4.1 Charging up Your Camera

Charge your camera with either USB cable or AC/DC adapter (not included). The red LED

lights up to indicate the camera is charging and turns off as soon as the camera has been

fully charged. It takes about 2 hours to fully charge the camera.

4.2 Inserting a Memory Card

Insert a MicroSD card (not included) before using your

camera. Assure that the camera power is turned OFF

before inserting the card to the slot.

Notes

1. There is only one correct direction to insert the

MicroSD card into the slot. Do not force the card in

the card slot as it may damage both the camera and

the MicroSD card.

2. A new MicroSD card should be formatted before using. For more information, please

see section 5.

4.3 Set up Date and Time

You can set the camera’s clock with the software to ensure that your video and photo files

are saved with the correct date/ time information.

To set up the camera clock

1. Connect your camera to a computer with the USB cable. Run setting_win.exe at your

MicroSD card folder. If you are a MAC user, run setting_mac.app instead

2. Find the “Date and Time” and click “SET”.

3. Adjust the date and time or click “Sync with PC” to set with your PC clock.

4. Click “OK” to save the settings.

5. After you complete the setting, disconnect the camera from your PC immediately to

make the date and time set correctly.

4.4 Sealing Your Camera

The Waterproof Housing lets the camera perform up to 10 meters

or 30 feet under water. You must seal the camera with Back

Cover in order to protect the camera when using it in wet or moist

conditions.

To secure the Back Cover

1. Attach the Back Cover to the back of the camera and rotate

clockwise until the two black dots are aligned

2. Slide the latch on the Back Cover to lock it.

To open the back cover, slide the latch on the back cover

to loosen it. Rotate the cover counterclockwise until the

white and black dots are aligned.

Notes

1. Failure to properly seal your camera can result in leaks that damage or destroy your

camera. Your warranty does not cover water damage resulting from user damage.

2. The rubber seal on the Cover forms the waterproof barrier to protect the camera in

wet and underwater conditions. You must keep this seal clean as a single strain of

hair or grain of sand can cause a leak into the product.

3. After every use in salt water, you will need to rinse the outside of the product and the

seal with non-salt water and dry. Not doing this can cause corrosion in the product or

failure in the seal, in turn, damaging the product.

4.5 Power On & Power Off

To power ON the camera:

Press and hold button. The camera will vibrate and the Green LED will turn on.

To power OFF the camera:

Press and hold button. The camera will vibrate two seconds and the Green LED will

turn off.

4.6 Recording Videos

Before starting recording, select the video resolution 1080p (1920x1080) or 720p

(1280x720) by switching the Video Resolution Switch

There are two methods available for starting the video record function. When starting a

video recording, a short vibration indicates recording started. The LED indicator illuminates

RED throughout the recording.

1. Whether the camera power is ON or OFF, simply slide switch towards the

camera front to start recording and you can see a red REC mark

2. When your camera is OFF and switch is at REC location, press and hold

the button to turn the camera ON and it will start recording.

Slide switch backward to stop recording and you can see a green STOP mark.

The camera will vibrate and the LED indicator will illuminate GREEN to indicate the

recording has stopped. The camera will then enter Standby mode.

An additional option is to hold button to stop the recording and turn the camera off.

The camera will vibrate two seconds and the Red LED light will turn off.

Notes

1. Changing video resolution is disabled during video recording.

2. There will be around 2-3 seconds delay before the camera starts recording.

3. Assure there is sufficient memory available on the MicroSD card. If the card is full,

the camera will vibrate for five seconds and the Green LED will flash continuously.

4.7 Taking Photos

1. Turn on the camera by pressing button.

2. After the camera power has been turned on, press button to take a photo. A

short vibration and a flash of Green LED indicate the action was successful.

Notes

1. The Still Photo function is disabled during video recording.

2. If the card is full, the camera will vibrate for five seconds and the Green LED will flash

continuously.

4.8 Auto Rotation

The camera has a built-in G-sensor which is able to detect the camera orientation. By

rotating your camera to 180o from the default position, the recorded view will be rotated in

the same angle. This allows the user to mount the camera in different orientation without

recording a rotated or inverted view.

Notes

1. The feature is available only for videos capturing, not for still photos.

2. Adjust your camera orientation before you start the video recording. The rotation

feature will not be activated throughout the recording.

3. You can disable the auto rotation function in the “General settings” with the software

Produkt Specifikationer

Mærke:	Lenco
Kategori:	Videokamera
Model:	Sportcam-200

Har du brug for hjælp?

Hvis du har brug for hjælp til Lenco Sportcam-200 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Videokamera Lenco Manualer

Lenco Sportcam-100 Manual

29 Juli 2024

Lenco Sportcam-200 Manual

26 Juli 2024

Lenco Sportcam-300 Manual

24 Juli 2024

Lenco Sportcam-600 Manual

18 Juli 2024

Lenco Sportcam-400 Manual

29 Oktober 2023

Lenco Sportcam-700 Manual

15 November 2022

Lenco Sportcam-500 Manual

12 November 2022

Videokamera Manualer

Nyeste Videokamera Manualer

Kogan KADS1030AACA Manual

19 December 2024

15 December 2024

15 December 2024

15 December 2024

15 December 2024

15 December 2024

Vimar 14565.SL Manual

15 December 2024

Vimar 14565 Manual

15 December 2024

Vimar 14560.SL Manual

15 December 2024

Steinberg SBS-EC-500 Manual

15 December 2024