Lintelek Smart Watch ID205G Manual

Lintelek Smartwatch Smart Watch ID205G

Læs nedenfor 📖 manual på dansk for Lintelek Smart Watch ID205G (3 sider) i kategorien Smartwatch. Denne guide var nyttig for 18 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/3
01 02 03 04 05 06 07
0908 10 11 12 13 14 15
Smart Watch
User Manual
Thank you for purchasing our products, read the
User Manual carefully before use
Model Number: ID205G
Bind Watch Synchronous Data
Product Parameters Safety and Product Information
Notes
Cleaning and Maintenance
FAQ
Instructions for use Operating Instructions Function Introduction
1. Download and install app
ID205G
You can set up the watch through the VeryFitPro app
for iOS or Android devices. The steps are shown as
follows.
Notes: The hardware platform of the equipment
system shall meet requirements.
lt is recommended to wear and maintain according to
the following three points:
1) Keep the product clean.
2) Keep the product dry.
3) Do not wear it too tight.
* Do not use household cleaners to clean the watch,
but use the soap free detergent.
* It is recommended to use alcohol to scrub stains
that are not easy to remove.
Q1 . Mobile APP search for the watch failed
1) It is recommended to update VeryFitPro to the
latest version.
2) It is recommended to close all programs, restart the
Bluetooth, and then connect.
3) Confirm whether the mobile phone system meets
Android 4.4 or IOS 8.0 or above.
Q2 . The watch received no alerts, text messages or
phone calls
1) You need to turn on the smart reminder function and
the call reminder switch in the APP, and synchronize to
the watch.
2) The iphone needs to be paired with the watch via
Bluetooth. (Please check the column of "Synchronous
Data" for details)
3) You need to keep your watch connected to Bluetooth.
Display location in the data bar
Women's health tracking function, which is used for
recording menstrual changes, tracks individual
menstrual cycle and predicts ovulation (it needs to
be enabled on the APP).
Range of charging temperature: 10°C - 45°C
Battery life: Actual battery life and charging time will vary
depending on usage and environment, etc.
Waterproof: Not suitable for diving, swimming in the sea or
sauna, but suitable for swimming in the swimming pool or in
the shower (cold watr) and shallow beach.
In daily wear, the watch
can detect all kinds of
exercise data. The user
needs to connect the
watch with bluetooth on
the APP before synchronous
operation. The detailed
operations are shown
as follows:
Open the mobile APP
>swipe down the page
> sync prompt appears
Connect and charge the watch according to the
picture. It needs to be charged to activate the watch
when it is started for the first time.
1) Turn on the Buetocth and GPS on your mcbile phone.
Find the binding request on the pull-down list on the
home page of the APP.
3) Click“Ok”to Complete binding
2. Bind process 1.Charging schematic
1) Enter sports
Click the sports icon > select the sports type > enter
the sports countdown automatically.
2) During sports
Pause sports: short press the right key.
Restore sports: short press the right key.
3) End sports
End sports: long press the right key > select the end
button on the screen.
2.Start sports
3.women’s health tracking
1.Definition of Key function 3. Main interface operation 1.Icon function introduction
2. Watch dial switch
2.Wear/install
Correct operation: Scan
the QR code below or on
the watch or download
“VeryFitPro”App through
the mobile App Store to
pair with the watch
Wrong operation: Pair the
watch directly with the
Bluetooth in your mobile
phone’s settings.
iOS 8.0 version
or above
Android 4.4
system or above
Support
Bluetooth 4.2
ID205G ID 205G
Notes:
* During binding process, VeryFitPro will prompt you
to enable GPS and Bluetooth, and authorize
VeryFitPro to get access to the GPS on you
mobile phone.
* iPhones will not prompt you with any information
unless you complete Bluetooth pairing on your
ID205G watch in the built-in Bluetooth in you
mobile phone after binding.
Notes!
* Please synchronize the data at least once within
7 days to avoid data loss at the watch end.
* The Apple phone also needs to be connected to the
paired watch in the bluetooth setting interface of
the mobile phone, so that the watch can be
alerted. The steps are shown as follows:
Open the IOS phone >set>bluetooth>search and
click pair
Wear Replace the strap
Wear the device a finger's
distance from the wrist bone
and adjust the tightness of
the wristband to a
comfortable position.
Flip the switch and take out
the wristband
Tip: Wearing too loosely may affect the accuracy of
heart rate data.
Notes: For more functions (sleeping) and operation,
please check the VeryFitPro software of the
mobile phone.
Short press the right key:
Return to previous interface
Long press the right key: start
Swipe the screen to enter different interfaces
(interactive interface tile diagram)
Notice bar
Data bar
Function list
interface
Status bar
Replacing the dial interface
will appear after long pressing
the dial.
1) Enter the sports window, and choose different
sports Modes. Change the sports mode on the APP.
2) Perform a heart rate test to check your heart rate
data for the day.
3) Help you regulate your breathing and relax
your mood.
4) View, turn off or turn on the alarm clock. You need
to add an alarm clock On the mobile App.
5) Control music play on your mobile phone
(watch cannot store music).
6) Have the timing and countdown function.
7) Record recent sports.
1 2
5 6 7
3 4
Model Screen type
Charging voltage
Battery life
Weight of
product
Bluetooth
version
Max. transmission
power consumption
ID205G
5V±0.2V
1.3inch color
screen
5-7 days
35g
BLE 4.2
0dBm
210mAh
5ATM
-10°C - 45°C
2402 - 2480MHz
about 2.5 hours
Battery
capacity
Charging
time
Waterproof
level
Operating
temperature
Product
frequency
Q3 . Bluetooth is often disconnected
1) If the distance between the watch and the mobile
phone is too far, the connection effect of more than 7m
bluetooth is obviously weakened.
2) Whether there is a shield between the watch and the
mobile phone, the human body, wearing metal jewelry,
etc. will interfere with the bluetooth connection signal.
3) Whether the bluetooth function of the mobile phone
is abnormal.
Q4 . About data backup
The data of the watch is synchronized at least once
every 7 days to the mobile phone (the watch end only
keeps the data of the last 7 days).
Q5 . How to restart and restore factory settings
Shutdown operation: Watch > set > shutdown/right-
key restart. Restore factory settings:connect watch to
APP>open APP > device model > more settings.
Q6 . Do I need to keep my bluetooth on when I wear
my watch?
1) For the three functions, i.e. counting steps, sleeping
and alarm clock, you do not need to connect the watch
to the mobile phone all the time. If you only need to wear
a watch when you exercise, you can connect the watch
and your mobile phone to view the data synchronously
after the exercise.
2) For the functions of call alert message alert, find the
phone, you need to turn on the mobile phone's bluetooth,
and maintain the connection with the mobile phone.
Do not disassemble, bore or damage the battery. Do
not disassemble the built-in batteries of non-
replaceable battery devices. Do not use sharp objects
to remove the battery.
If you are wearing a pacemaker or other implanted
electronic devices, please consult your doctor before
using the heart rate monitoring strap.
Battery warning
If you are wearing a pacemaker or other implanted
electronic devices, please consult your doctor before
using the heart rate monitoring strap.
The watch’s optical heart rate sensor glows green and
flashes. If you suffer from epilepsy or are sensitive to
blinking light sources, please consult your physician if
you can wear this product.
The device tracks your daily activities through sensors.
These data are intended to tell you about your daily
activities, such as steps, sleep, distance, heart rate and
calories, but may not be completely accurate.
The device, accessories, heart rate sensors and other
relevant data are designed for entertainment and
fitness, not for medical purposes. They are not
applicable to the diagnosis, monitoring, treatment or
prevention of any diseases or symptoms. The heart
rate data is for reference only. We are not responsible
for any consequences caused by any data deviation.
Health Warning
Cycling Warning
The damage or defect caused by misuse or improper
use is beyond the warranty scope. The device supports
the use under cold shower or swimming excluding diving.
* In daily use, the device should be avoided from
wearing too tight. Please keep the parts where the
device touches the skin dry.
* During heart rate detection, please keep your arm
stand still.
Notes:
Device data should be synchronized once every seven
days to avoid data loss.
The device has no waterproof effect on seawater,
acidic and alkaline solution, chemical reagent and
other corrosive liquids.
The device meets the EU ROHS criterion.
Please refer to IEC 62321, EU ROHS
Directive 2011/65/EU and revised directive.
Changes or modifications not expressly approved by
the party responsible for compliance could avoid the
user’s authority to operate the equipment. This
equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment
and receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS
Old electrical appliances must not be disposed of together
with the residual waste, but have to be disposed of separately.
The disposal at the communal collecting point via private
persons is for free. The owner of old appliances is responsible
to bring the appliances to these collecting points or to similar
collection points. With this little personal effort, you contribute
to recycle valuable raw materials and the treatment of toxic
substances.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
this device may not cause harmful interference, and
this device must accept any interference received,
including interference that may cause undesired
operation.
Switch

Produkt Specifikationer

Mærke: Lintelek
Kategori: Smartwatch
Model: Smart Watch ID205G

Har du brug for hjælp?

Hvis du har brug for hjælp til Lintelek Smart Watch ID205G stil et spørgsmål nedenfor, og andre brugere vil svare dig


Smartwatch Lintelek Manualer

Lintelek

Lintelek Smart Watch GT01 Manual

16 August 2024
Lintelek

Lintelek Smart Watch ID205G Manual

15 August 2024

Smartwatch Manualer

Nyeste Smartwatch Manualer

Huawei

Huawei S-TAG Manual

21 December 2024
Casio

Casio Pro Trek Smart WSD-F21HR Manual

21 December 2024
Garmin

Garmin D2 Mach 1 standard Manual

17 December 2024
Fossil

Fossil Venture Gen 4 FTW6031 Manual

15 December 2024
Fossil

Fossil Q Modern Manual

15 December 2024
Fossil

Fossil Q Pursuit Manual

15 December 2024
Fossil

Fossil Collider Hybrid HR Manual

15 December 2024
Fossil

Fossil Gen 6 Display FTW407 Manual

15 December 2024
Fossil

Fossil Gen 6 Display FTW4070 Manual

15 December 2024
Fossil

Fossil Gen 6 Display FTW6078 Manual

15 December 2024