Logik L17JBS17 Manual

Logik Kedel L17JBS17

Læs nedenfor 📖 manual på dansk for Logik L17JBS17 (4 sider) i kategorien Kedel. Denne guide var nyttig for 11 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/4
1 2 3 4
1.7L
1.5L
1.0L
0.5L
MAX
1.7L
1.5L
1.0L
0.5L
MAX
Thank you for purchasing your new Kettle.
We recommend that you spend some time reading this
instruction manual in order that you fully understand all
the operational features it oers. You will also nd some
hints and tips to help you resolve any issues.
Read all the safety instructions carefully before use and
keep this instruction manual for future reference.
Unpacking
Remove all items from the packaging. Retain the packaging. If you
dispose of it please do so according to local regulations.
The following items are included:
Do not insert any foreign objects or allow any liquid to
spill into the Power Connector Hole.
• Never open the lid while the water is boiling. The
steam coming out from the kettle is very hot.
• If there is insucient water in the kettle, the
automatic safety cut-out will operate. If this happens,
allow the kettle to cool for 10 minutes before relling
with cold water and re-boiling.
• Ensure that the switch is not obstructed and the lid is
rmly closed. The kettle will not turn o if the switch
is obstructed or if the lid is open.
• After removing the kettle, there may be some water
on the surface of the stand. This is condensation from
the steam causing the kettle to automatically switch
o after boiling. This is normal and should not be a
cause for alarm.
If the kettle is overlled, boiling water may be ejected
from the spout and cause scalding.
This kettle must only be used with the stand provided.
Main Unit Kettle Stand Instruction Manual
Product Overview
First Time Use
Clean your kettle by boiling a full kettle of water twice and then
discarding the water.
Keeping the Mains Cable Tidy
Extend the mains cable in the kettle stand to the required length.
Locate the mains cable in the slot in the stand. For safety it is
recommended that the length of exposed mains cable is kept as
short as possible.
Filling the Kettle
Push the Open Button down.
• Fill the kettle with the required amount of water.
• Do not exceed the maximum ll level (MAX. 1.7L) as indicated
by the “MAX” mark on the interior of the kettle.
• Always ensure the kettle is lled passed the minimum ll level
(MIN 0.5L).
• Gently push the lid closed. It will click shut to indicate it is fully
and securely closed.
Instruction
Manual
Open Button
Lid
Power Switch
Mains Cable
Kettle Stand
Spout
Indicator
Switching On
1. Place the kettle on its stand. Connect
the stand’s mains cable to the mains
socket.
When the Water has Boiled
The kettle will automatically switch o.
Cleaning the Kettle
The kettle exterior should be cleaned with a soft damp cloth. Do
not use abrasive cleaners or scouring pads which may damage the
nish of the kettle.
Remember to clean the lter at intervals. Detach the lter by
pressing down the tab of the lter inside the kettle.
Never immerse the kettle or the stand in water and always keep
the electrical contacts and the power connector hole dry. Always
disconnect from the mains before cleaning the stand.
Descaling the Kettle
Depending on the hardness of the water in your area, limescale
may be deposited on the heating element and the inside of
the kettle. This normal build-up is not harmful to health but an
excessive amount of scale may aect the performance of the
kettle.
To descale, ll the kettle with distilled water up to three-quarters
of the Max level and bring the water to boil. After the kettle has
switched o, add a descaling solution following the manufacturers
instructions. Never attempt to descale the kettle by chipping or
scraping with a sharp implement.
Alternatively, you can ll the kettle with 3 cups of white vinegar.
Add water to cover the bottom of kettle completely. Leave the
water in the kettle overnight. Do not boil.
Empty the solution from the kettle. Any stains remaining in the
kettle can be removed by rubbing with a damp cloth.
Fill the kettle with clean water to maximum level, bring to boil and
then discard the water. Repeat and the kettle will be ready to use.
2. Push the power switch down to turn
on the kettle.
3. The indicator on the power switch
will light up to indicate that the kettle
is heating.
Power Connector Hole
1.7L
1.5L
1.0L
0.5L
MAX
1.7L
1.5L
1.0L
0.5L
MAX

Produkt Specifikationer

Mærke: Logik
Kategori: Kedel
Model: L17JBS17

Har du brug for hjælp?

Hvis du har brug for hjælp til Logik L17JBS17 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Kedel Logik Manualer

Logik

Logik L17SKGR14 Manual

26 August 2024
Logik

Logik L17KPS12 Manual

26 August 2024
Logik

Logik L17SKC14 Manual

26 August 2024
Logik

Logik L17KBS11 Manual

26 August 2024
Logik

Logik LC17PKB12 Manual

26 August 2024
Logik

Logik L17SKBK14 Manual

26 August 2024
Logik

Logik L17JBS17 Manual

26 August 2024
Logik

Logik L10KBS13E Manual

15 September 2023
Logik

Logik L17TKS13 Manual

7 August 2023
Logik

Logik L17JKW10 Manual

22 Maj 2023

Kedel Manualer

Nyeste Kedel Manualer

Russell Hobbs

Russell Hobbs 20160 Manual

20 December 2024
Morphy Richards

Morphy Richards Prism 108251 Manual

20 December 2024
Russell Hobbs

Russell Hobbs Aston RHK50 Manual

20 December 2024
Tiger

Tiger PTV-A080 Manual

19 December 2024
Proctor Silex

Proctor Silex K2070G Manual

19 December 2024
Concept

Concept RK0091 Manual

19 December 2024
Oster

Oster BVSTKT3101 Manual

19 December 2024
Oster

Oster BVSTKT673SS Manual

19 December 2024
Continental Edison

Continental Edison CEBL15LB Manual

19 December 2024
Tiger

Tiger PIS-G220 Manual

18 December 2024