Lorex ETP-01 Manual


Læs nedenfor 📖 manual på dansk for Lorex ETP-01 (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 16 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Package
ETP-01T (Transmitter)
ETP-01R (Receiver)
Quick Start
Guide
Hardware Overview
Overview
ETP-01 Series are High-Speed, long distance Ethernet & PoE extender
that makes possible to transmit the Ethernet signal and PoE up to
300m through single pair of twisted wires.
It is cost-effective and time saving solution to migrate existing
analog system to IP based system since ETP-01 series support easy
installation utilizing the existing UTP bundle cables or any single
twisted pair cables.
With long distance transmission feature, the device makes to
overcome 100 meters distance limitation easily and reduces the
construction cost significantly compared with fiber optic configuration.
Features
Long reach Ethernet & PoE extension over existing 2-Wire twisted
cable
Data + Power over twisted cable
Data and PoE distance up to 300 m
100Mpbs Full Duplex
PoE, PoE+, Extra PoE (Max. 60W PoE output, ETP-01T model only
with DC Power adapter)
LED Indication (Data, Power)
Plug & Play
Surge Protection
Support PoE, PoE+ Input (25.5W) from PoE Switch / PoE NVR
(ETP-01R model only)
Slim design
Quick Start Guide
ETP-01T / ETP-01R
Please read carefully the instruction manual before use.
Contents of this manual are subject to change without prior
notice for reasons such as functionality enhancements.
Installation Guide
1. Connect Ethernet cable (Cat5e or better) from PoE Switch/NVR to
ETP-01R. Check LEDs on ETP-01R.
Ethernet cable
(Cat5e or better)
PoE Switch/NVR
Check LEDs
2. Connect single twisted pair cable to ETP-01R.
Connect single twisted pair cable from ETP-01R to ETP-01T.
2-Wire Twisted cable
3. Connect Ethernet cable (Cat5e or better) from ETP-01T to IP
Camera. Check LEDs on ETP-01T.
Î
Set ETP-01T, PoE Switch ON to supply direct power to IP camera.
Set ETP-01T, PoE Switch OFF to connect PC or network switch
devices.
Check LEDs
Ethernet cable
(Cat5e or better)
LED Indicators
Indicator Color Function
LINK Ethernet Data Act
ACT Ethernet Connect Act
Attention polarity( , ).
Rev.4.0
Ri tgh
Left
Top
RJ45
Status LED Indicator
LINK
Status LED Indicator
ACT
DC Power JackTeminal connector
PoE Switch ON/OF
(ETP-01T only)
Mounting
Screw Hole
Mounting
Screw Hole


Produkt Specifikationer

Mærke: Lorex
Kategori: Ikke kategoriseret
Model: ETP-01

Har du brug for hjælp?

Hvis du har brug for hjælp til Lorex ETP-01 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Lorex Manualer

Lorex

Lorex AJLD-1B Manual

27 September 2024
Lorex

Lorex AX8 Manual

5 September 2024
Lorex

Lorex AEX16 Manual

5 September 2024
Lorex

Lorex ECP-01T Manual

2 September 2024
Lorex

Lorex ECP-01R Manual

2 September 2024
Lorex

Lorex ETP-01 Manual

2 September 2024
Lorex

Lorex ETP-01T Manual

2 September 2024
Lorex

Lorex EPR-111 Manual

2 September 2024
Lorex

Lorex ECP-2601R Manual

2 September 2024
Lorex

Lorex EUP-01T Manual

2 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Alpine

Alpine SBS-0515 Manual

8 November 2024
Alpine

Alpine KCE-103V Manual

8 November 2024
Alpine

Alpine KCE-104V Manual

8 November 2024
Advantech

Advantech ECU-1051TL Manual

8 November 2024
Alpine

Alpine DDC-R13A Manual

8 November 2024
Alpine

Alpine HCE-C200F Manual

8 November 2024
Alpine

Alpine CRM-1652RF Manual

8 November 2024
Alpine

Alpine KIT-8MBF Manual

8 November 2024
Alpine

Alpine APF-D200MB Manual

8 November 2024
Alpine

Alpine CDM-9803RR Manual

8 November 2024