Lorex EUP-01T Manual


Læs nedenfor 📖 manual på dansk for Lorex EUP-01T (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 36 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Hardware Overview
Package
EUP-01T (Transmitter)
EUP-01R (Receiver)
Quick Start
Guide
Overview
EUP-01 Series are High-Speed, long distance Ethernet & PoE extender
that makes possible to transmit the Ethernet signal and PoE up to
400m through UTP cable. It is cost-effective and time saving solution
to migrate existing system to IP based system since EUP-01 series
support easy installation utilizing the existing UTP cables. With long
distance transmission feature, the device makes to overcome 100
meters distance limitation easily and reduces the construction cost
significantly compared with fiber optic configuration.
Features
Long reach Ethernet & PoE extention over UTP cable
Data + Power over UTP cable
Data & PoE distance up to 400m
Data up to 100Mbps
100Mbps Full Duplex
Multicast ready
PoE, PoE+, Extra PoE (Max. 60W PoE output, EUP-01T model only
with DC Power adaptater
PoE ON/OFF Switch (EUP-01T only)
LED Indication (Data, Power)
Plug & Play
Built-in surge protection
Support PoE, PoE+ Input (25.5W) from PoE Switch / PoE NVR
Slim design
Quick Start Guide
EUP-01T / EUP-01R
Please read carefully the instruction manual before use.
Contents of this manual are subject to change without prior
notice for reasons such as functionality enhancements.
Installation Guide
1. Connect Ethernet cable (Cat5e or better) from PoE Switch/NVR to
EUP-01R. Check LEDs on EUP-01R.
Ethernet cable
(Cat5e or better) PoE Switch/NVR
Check LEDs
2. Connect Ethernet cable to EUP-01R.
Connect Ethernet cable from EUP-01R to EUP-01T.
Ethernet cable
(Cat5e or better)
3. Connect Ethernet cable (Cat5e or better) from EUP-01T to IP
Camera (PoE Model Only). Check LEDs on EUP-01T.
Î
Set EUP-01T, PoE Switch ON to supply direct power to IP camera.
Set EUP-01T, PoE Switch OFF to connect PC or network switch
devices.
Check LEDs
Ethernet cable
(Cat5e or better)
LED Indicators
Indicator Color Function
LINK Ethernet Data Act
ACT Ethernet Connect Act
Rev.1.0
Ri tgh
Left
Top
RJ45
RJ45
Status LED Indicator
LINK
Status LED Indicator
ACT
DC Power Jack
PoE Switch ON/OF
(EUP-01T only)
Mounting
Screw Hole
Mounting
Screw Hole


Produkt Specifikationer

Mærke: Lorex
Kategori: Ikke kategoriseret
Model: EUP-01T

Har du brug for hjælp?

Hvis du har brug for hjælp til Lorex EUP-01T stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Lorex Manualer

Lorex

Lorex AJLD-1B Manual

27 September 2024
Lorex

Lorex AX8 Manual

5 September 2024
Lorex

Lorex AEX16 Manual

5 September 2024
Lorex

Lorex ECP-01T Manual

2 September 2024
Lorex

Lorex ECP-01R Manual

2 September 2024
Lorex

Lorex ETP-01 Manual

2 September 2024
Lorex

Lorex ETP-01T Manual

2 September 2024
Lorex

Lorex EPR-111 Manual

2 September 2024
Lorex

Lorex ECP-2601R Manual

2 September 2024
Lorex

Lorex EUP-01T Manual

2 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Kramer

Kramer VP-8X8 Manual

25 November 2024
Kramer

Kramer PT-2C Manual

25 November 2024
Lazer

Lazer Bob+ Manual

25 November 2024
Dometic

Dometic DPS 80 Manual

25 November 2024
Kramer

Kramer 102MX Manual

25 November 2024
Kramer

Kramer FC-18 Manual

25 November 2024
Kramer

Kramer DSP-62-UC Manual

25 November 2024
Tiger

Tiger SKF-H101 Manual

25 November 2024