Lorus R2347CX9 Manual

Lorus Ur R2347CX9

Læs nedenfor 📖 manual på dansk for Lorus R2347CX9 (2 sider) i kategorien Ur. Denne guide var nyttig for 15 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

C H A R A C T ERI S T I C S

1. Time/calendar display: Hour, minute, second,

month, date and day of the week

2. Time indication: 12-hour display format with

PM indicator and 24-hour display format are

available.

3. Stop wat ch: The st opwat ch can measure

up t o 23 hours 59 m inutes and 59 seconds

i n 1 / 1 0 0- s e c o n d i n c r e m e n t s . L a p t i m e

measurement is available. Up to 15 lap times

can be stored in memory.

Memory recall function: Data obtained in

the Stopwatch mode can be recalled after

measurement.

4. C o u ntdo wn tim er : T he cou nt d own t im e r

can be set up to 23 hours 59 minutes and 59

seconds.

5. Daily alarm: The daily alarm can be set to

sound at the designated time on a 24-hour

basis. Three individual daily alarms can be set.

Single- time alarm: The Single -t ime alarm

sounds only once at a designated time and it

is disengaged automatically.　Five individual

single-time alarms can be set.

6. Second Time Zone: Time in a different time

zone can be displayed.

7. Chime: The chime can be set to sound every

hour on the hour with a single beep.

8. Illu m i n a t i n g l i g h t : T h e bu i l t - i n e l e c t r o -

luminescent (EL) light evenly illuminates the

display for easy viewing in darkness.

B U T T O NS AND D I S P L AY S

HOW T O S ET T H E T I ME/ C ALEN D A R

H O W T O USE S T O P WAT C H

The display mode changes in the following

order by pressing Button D.

1 Press Button A for 2 seconds to change the

display to the TIME/CALENDAR SETTING mode.

(The second digits start flashing.)

2 Selection of the digits to be adjusted (flashing)

is made in the following orde r by pressing

Button D.

3 One digit (flashing) is increased or decreased

w i t h e a c h p r e s s i n g o f B u t t o n B o r C ,

respectively. To move the digits quickly, keep

the Button pressed.

• Second setting

Press Button B or C in accordance with a

time signal. The second digits are reset to

“00” and start counting immediately.

When the second digits count any number

fr om “30” to “59” and But ton B or C i s

pressed, one mi nut e is added and t he

seconds are immediately reset to “00.”

Choice of 12-Hour/24-Hour format

• T he t i me dis pl ay f o rma t in e it he r 12- ho ur

indicat ion or in 24-hour indication can be

selected alternately by pressing button B or

C. Under the 12-hour indication format, “PM”

mark appears in the afternoon, but no AM

mark appears in the morning. Under the 24-

hour indication format, no mark appears on

the display.

* Measurement and release of lap t ime can be

repeated by pressing Button C.

* When Button C is pressed, the display changes

to show the current lap time and total time from

START for 3 seconds, and then it aut omat ically

returns to show the ongoing measurement.

* When the stopwatch is reset by pressing Button C,

the measured data is stored in memory.

Press Button D to go to the STOPWATCH mode.

The STOPWATCH mode indicator appears on the

display.

STOPWATCH OPERATION

Standard Measurement

Lap Time Measurement

BC C B C

Start Lap 1 Reset

Lap 2 Stop

BB C

Start Stop Reset

NREZ010 5-2015

CAL. Z010 23 (R SERIES)

During the measurement, the STOPWATCH signal

keeps flashing.

Press Button D to return to the TIME/CALENDAR

mode.

1. Press Button D to go to the Memory Recall

mode. The MEMORY RECALL moce indicator

appears on the display.

Memory Recall Function

2. Press Button C to show the data of the latest

measurement. T he elapsed time and the

date of measurement are displayed with a

RUN number.

3. Press Button B to read each recorded lap time.

Recorded lap time is shown in order of each

lap number.

4. Press B ut t on C t o e xit t he Memory Re call

Function. The display returns to the MEMORY

RECALL mode.

How to delete all of the memories

• Press Button A for 2 seconds. The “DELETE”

indicator appears on the display when the

watch starts deleting stored data. When the

deletion is finished, the display returns to the

MEMORY RECALL mode, and after 1 second, it

automatically goes to the STOPWATCH mode.

Data obtained in the Stopwatch mode can be

recalled after measurement. Each time data from

START to RESET is managed as a RUN. Press Button

D to return to the TIME/CALENDAR mode.

EN G A GEM ENT/D I S E NGA G E MEN T OF

C H I M E

With each press of Button C in the TIME/CALENDAR

mode, the chime can be alternately engaged

or disengage d. T he CHIME signal appe ars or

disappears on the display accordingly.

A (SET /LIGH T )

PM ind i-

c at o r

Hou r

Day of t he w ee k

Ch im e

s i gn al

St opw at c h

s i gn al

Da t e

M inu t e

Se cond

T ime r s ig na l

Al ar m

s i gn al

B (S TAR T /S T O P)

D (M O DE) C (L AP /RE SET )

4 After all the adjustments are completed, press

Butt o n A t o re turn to t he TIME/ CALEN DAR

mode.

T IM ER

T IM E/CAL E NDA R ST O PWA T CH

MEM O RY RECA LL

L O CAL CIT Y

S EC O ND S

DAT E

12 /2 4- HO U R FO R MAT

M O NT H

M IN UT E S HO U R S

L O CAL CIT Y

DATE SETTING MONTH SETTING

TIME/CALENDAR mode

12/24 FORMAT SETTING

LOCAL CITY SETTING

MINUTE SETTING

HOUR SETTING

SECOND SETTING

ST O PWA T CH mo de ind ic at or

ST O PWA T CH s ignal

L ocal c it y

M on t h Yea r

DA ILY ALA RM

SIN GL E-T IM E AL ARM

YEAR

YEAR SETTING

MEM O RY RECA LL moc e ind icat o r

After

1 second

L AP nu mbe r

Tot al t i me f r om STA RT

H O W T O USE C O U N T D O W N T I M ER

Press Button D three times to go t o the TIMER

mode. The TIMER mode indicator appears on the

display.

1. Press Button A for 2 seconds to change the

display to the TIMER SETTING mode. The hour

digits start flashing.

2. P r e s s B u t t o n B o r C t o s e t t h e s e c o n d

digits. One digit (f lashing) is incre ased or

decreased with each pressing of Button B or C,

respectively. To move the digits quickly, keep

the Button pressed.

3. Press Button D to confirm the second setting

and move on to the minute setting. The minute

digits start flashing.

4. Press Button B or C to set the minute digits.

One digit (flashing) is increased or decreased

w i t h e a c h p r e s s i n g o f B u t t o n B o r C ,

respectively. To move the digits quickly, keep

the Button pressed.

5. Press Button D to confirm the minute setting

and move on to the hour setting. T he hour

digits start flashing.

6. Press Button D to set the Timer number.

7. Press Button A to complete the timer setting.

L AP t ime

Produkt Specifikationer

Mærke:	Lorus
Kategori:	Ur
Model:	R2347CX9

Har du brug for hjælp?

Hvis du har brug for hjælp til Lorus R2347CX9 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ur Lorus Manualer

Lorus R23 SERIES - CAL Z013 Manual

23 August 2024

22 August 2024

20 August 2024

19 August 2024

19 August 2024

Lorus Dress RT333GX9 Manual

18 August 2024

Lorus Kids R2345MX9 Manual

18 August 2024

Lorus Z015 Manual

18 August 2024

Lorus Dress RM307DX9 Manual

17 August 2024

Lorus Sports RM367EX9 Manual

17 August 2024

Ur Manualer

Nyeste Ur Manualer

21 December 2024

21 December 2024

21 December 2024

21 December 2024

Casio GA-201-1A Manual

21 December 2024

Casio G-Shock GA-800-1AJF Manual

21 December 2024

Casio Vintage A1000RCB-1JR Manual

21 December 2024

Casio G-Shock GM-S2140 Manual

21 December 2024

Casio EFR-571MD Manual

21 December 2024

Casio Edifice EF-129D-2A Manual

21 December 2024