Lorus VC10 Manual

Lorus Ure VC10

Læs nedenfor 📖 manual på dansk for Lorus VC10 (2 sider) i kategorien Ure. Denne guide var nyttig for 17 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
NREAQ1 12-2011
HOW TO USE NON-CALENDAR MODEL
HOW TO USE DAY/DATE MODEL
The day of the week can be displayed
bilingually (English/another language) and you
can select either.
1. How to set the day and date
Day setting for Cal. PC33
At the second click position,turn the hands
clockwise and counterclockwise repeatedly
between 11:15 pm and 3:45 am to select the
desired day and language.
Note: Do not attempt to set the day and date
between the times of
9:00 pm and 4:00 am
as this may cause the day and date
displays to change out of sequence.
2. How to set the time
LUMIBRITE WATCH
If your watch is a LORUS LUMIBRITE watch, it
has following features.
LORUS LUMIBRITE watches absorb and store light
energy from natural and artificial light sources
and emit light in the dark. They are made of
environmentally friendly material, and therefore,
are harmless to human beings and the
environment.
With a full charge, LORUS LUMIBRITE watches
glow in the dark hours longer than conven-
tional luminous watches of this type. If ex-
posed to a light of more than 500 lux (i.e.,
the brightness of a typical office) for approxi-
mately 10 minutes, or direct sunlight for 2
minutes, they will glow for hours.
Since LORUS LUMIBRITE watches emit the light
they store, the brightness will decrease
gradually over time. The length of time they
will glow may also differ slightly depending
on such factors as the brightness of and
distance from the light source used to charge
the watch.
Be sure to check that the AM/PM is correctly
set. (The day and date are designed to
change once every 24 hours.)
To adjust the correct time for a quartz watch,
it is necessary to advance the minute hand
4 or 5 minutes ahead of the correct time and
then turn it counterclockwise to set the
designated time.
Pull the crown OUT to the FIRST click and set the
time. Then push the crown IN.
Note: When you set the time, first set the minute
hand to a properly advanced time, then
return the minute hand to the correct time
by turning it COUNTERCLOCKWISE.
Normal position
First click
Pull out the
crown to the first
click position.
(The crown of
this watch can
be pulled out to
the second click
position.)
Turn the crown
and set the
previous day
and date. (The
day and date
can be selected
alternatively
and displayed in
English or the
other
language.)
(For Cal. PC33,
turn
clockwise to
set the date
only.)
Pull out the
crown to the
second click
position and
set the present
day and date
by turning the
minute hand.
Pull out the
crown to the
second click
position and the
second hand
stops. The
second hand
should be
stopped on 12
o’clock position.
Turn the crown
and set the
desired time.
Push the crown
in to the normal
position in
accordance
with a time
signal.
11.11.9, 11:34 AMPage 1 Adobe


Produkt Specifikationer

Mærke: Lorus
Kategori: Ure
Model: VC10

Har du brug for hjælp?

Hvis du har brug for hjælp til Lorus VC10 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ure Lorus Manualer

Lorus

Lorus 1N00 Manual

15 Oktober 2024
Lorus

Lorus R2327CX9 Manual

13 Oktober 2024
Lorus

Lorus NRFBX Manual

14 Juli 2024
Lorus

Lorus V52Y Manual

13 Juli 2024
Lorus

Lorus Z010 Manual

12 Juli 2024
Lorus

Lorus VC10 Manual

11 Juli 2024
Lorus

Lorus W136 Manual

10 Juli 2024
Lorus

Lorus W209 Manual

9 Juli 2024
Lorus

Lorus W620 Manual

8 Juli 2024
Lorus

Lorus V732 Manual

8 Juli 2024

Ure Manualer

Nyeste Ure Manualer