Lorus W100 Manual

Lorus Ur W100

Læs nedenfor 📖 manual på dansk for Lorus W100 (3 sider) i kategorien Ur. Denne guide var nyttig for 10 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/3
INSTRUCTION MANUAL
CAL. W100 (RBM SERIES)
NREW100 01-99
CHARACTERISTICS
1. Time/calendar display: Hour, minutes,
seconds, month, date and day of the week.
Fully automatic calendar: Calendar adjusts
automatically for odd and even months including
February of leap years from the year 1998 to
the end of 2048.
Time indication: Changeover between
12- and 24-hour indications is possible.
2. Stopwatch: Measures up to10 hours with 1/
100 second readout.
Lap time measurement: When the fastest
lap time is measured, a beep sounds and the
display is illuminated.
Auto start function: The stopwatch can be
set to start automatically at a desired time .
3. Countdown timer:
Preset timer: Five different lengths of time
(3, 10, 15, 30 and 45 minutes) have been
preset for the timer.
Adjustable timer: Up to 23 hours and 59
minutes can be set in minute increments.
4. Daily alarm: The alarm can be set to ring on
a 24-hour basis.
Hourly time signal: Can be set to ring
every hour on the hour.
5. Dual time: Time of a different time zone can
be set and displayed.
6. Illuminating light: The light illuminates
the display in the dark.
1. Press button “A” to show the time/calendar
display.
2. Press button “A” for 2 seconds to show the
time/calendar setting display. The second
digits start flashing.
3. Selection of the digits to be adjusted (flashing)
is made in the following order by pressing
button “B”.
Date Month
4. Press button “C” to set the flashing digits.
One digit is advanced with each press of
button “C”. Digits except seconds and 12-
/24-hour indication move quickly by keeping
button “C” pressed.
5. After all the adjustments are completed,
press button “A” to return to the time/
calendar display.
Notes:
1. When setting the hour digits in the 12-
hour indication, check that AM/PM is properly
set. In the 24-hour indication, there is no
indication.
2. Once the year, month and date have been
set, the day of the week is set automatically.
3. If the watch is left untouched in the time/
calendar setting display with the digits
flashing, it will automatically return to the
time/calendar display in 2 minutes.
Seconds setting
When the seconds digits are flashing, press
button “C” in accordance with a time signal.
The seconds are reset to “00” and start immediately.
When the seconds count any number from
“30” to “59” and button “C” is pressed, one
minute is added and the seconds are immediately
reset to “00”.
Year
Hour
Minutes
Seconds
12-/24-hour
indication
→→
HOW TO USE THE STOPWATCH
The stopwatch can measure up to 10 hours
in 1/100 seconds.
* Even if the stopwatch display is changed to
another while the measurement is in prog-
ress, it continues counting properly. After
the stopwatch is used, however, be sure to
reset it as the battery energy is consumed
enormously to shorten the battery life.
B
C
A
Minutes Seconds 1/100 seconds
Stopwatch
display mark
Stopwatch Operation
Press button “A” to show the stopwatch display.
BUTTONS AND DISPLAYS
MODE
START
LAP
LIGHT
AM/PM
mark
Hour Minutes
Light
button
Alarm
mark
Hourly time
signal mark
Day
Seconds
A
B
Month
Date
The selection of the display can be made in the
following order with each press of button “A”.
Timer
display
A
A
Stopwatch
display
Alarm
display
Time/calendar
display
AA
With each press of button “B” in the time/calen-
dar display, the display changes over between
the time/calendar and dual time alternately.
Time/calendar
display Dual time
display
B
I
NSTRUCTION
M
ANUAL
CAL. W100 (RBM SERIES)
NREW100 01-99
Month
Hour Minutes Seconds
B
C
Day Date
AM/PM
mark
A
HOW TO SET THE TIME/CALENDAR
Start Stop
Restart
Stop
Accumulated elapsed time measurement
BB BBC
Reset
Accumulate repeatedly by
pressing button “B”.
Lap time measurement
Start B
“Lap time” refers to an elapsed time required
to cover a given section of the whole distance.
Lap 1 CC
Stop
Reset
BC
Note: When a lap time measured is the fastest
among the lap times previously measured,
a beep rings and the display is illuminated.
** Can repeat by pressing button “C”.
Lap 2
**
C


Produkt Specifikationer

Mærke: Lorus
Kategori: Ur
Model: W100

Har du brug for hjælp?

Hvis du har brug for hjælp til Lorus W100 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ur Lorus Manualer

Lorus

Lorus VX7P Manual

22 August 2024
Lorus

Lorus VX9P Manual

20 August 2024
Lorus

Lorus Z021 Manual

19 August 2024
Lorus

Lorus Z004 Manual

19 August 2024
Lorus

Lorus Z015 Manual

18 August 2024

Ur Manualer

Nyeste Ur Manualer

Braun

Braun BN0024G Manual

21 December 2024
Braun

Braun BN0021L Manual

21 December 2024
Braun

Braun BN0021G Manual

21 December 2024
Braun

Braun BN0011L Manual

21 December 2024
Casio

Casio GA-201-1A Manual

21 December 2024
Casio

Casio EFR-571MD Manual

21 December 2024