Lorus Y704E Manual

Lorus Ur Y704E

Læs nedenfor 📖 manual på dansk for Lorus Y704E (2 sider) i kategorien Ur. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
NREY704E 11-2005
CAL. Y704 (R23 SERIES)
C H A R A C T E R I S T I C S
1. Time/Calendar Display
Hour, minute, second, month, date and the
day of the week
Automatic Calendar Function
The calendar adjusts automatically for odd
and even months including Februaries of
leap years.
Time Display Format
12-hour display format with AM/PM indicator
and 24-hour display format are available.
2. Stopwatch
The stopwatch can measure up to 9 hours
59 minutes and 59 seconds in 1/100-second
increment s.The st opwat ch fe at ure s t he
following functions.
Standard measurement
Accumulated Time measurement
Lap time measurement
Split time measurement
M a x i m u m 9 9 l a p / s p l i t t i m e s c a n b e
displayed, among which the first 30 lap/split
times can be recorded.
Memory Recall Function
Ea c h r e co r d e d lap/split t imes can be
recalled after measurement is finished.
3. Daily Alarm
The alarm can be set to sound on a 24-hour
basis.
4. Illuminating light
The built-in electroluminescent backlight
illuminates the display for viewing in darkness.
B U T T O N S A N D D I SP L AY S
LAP
[ ]
AM
AM
T im e / Calendar Mode L ap M o d e
Alarm Mode Spli t Mode
SPLIT
[ ]
Press Button C to select a display mode. The
display mode changes over in the following
order.
H O W T O S E T T H E T I ME/ C ALEND A R
1. Press Button C to go to the Time/Calendar
Mode.
2. Press Button B for 2 seconds, the display
changes to the Time/Calendar Setting Mode.
The second numeral starts flashing, and the
year appears in place of the day of the
week.
3. Press Button A to select an it em to be
adjusted. The item changes over in the
following order.
While the second numeral is flashing,
press Button D in accordance with a time
signal. The second numeral is reset to00
and starts counting immediately.
When the se cond numeral re ad any
number between 30 and 59, and Button
D is pressed, one minute is added.
Second setting
M on t h
D at e
Second
M in ut e
Hour
AM/PM indi c at o r for
12-hour di s play only
Day of the week
4. Use Button D to adjust each item.
For the minute, hour, month, date and
year settings, e ach press of Button D
advances the displayed numeral by one.
Keep Button D pressed to advance the
numeral quickly.
For the choice of t ime display format,
each press of Button D selects alternatively
12-hour display or 24-hour display.
Press Button A to confirm the adjustment
of the selected item and move on to the
next item.
5. U p o n c o m p l e t i o n o f a l l n e c e s s a r y
adjustments, press Button B to return to the
Time/Calendar Mode.
Under 12-hour display, an AM indicator
in the morning and a “PM indicator from
the afternoon are displayed.
Once year, month and date are set, the
day of the we e k is autom atically set
accordingly.
H O W TO U S E T HE S T OPWAT CH
The stopwatch can measure up to 9 hours,
59 minutes and 59 seconds in 1/100-second
increments. When the measurement is over
9 hours 59 minutes 99, the stopwatch will be
reset t o 0:000000 and start counting
again.
Standard Measurement
Standard time can be measured either in the
Lap Mode or in the Split Mode.
1. Press Button C to go to the Lap Mode or Split
Mode.
2. Pr e s s B ut t on D t o s t a r t a nd st o p t h e
stopwatch.
3. Press Button A to reset the stopwatch.
Accumulated Elapsed Time Measurement
Accumulated Elapsed Time can be measured
either in the Lap Mode or in the Split Mode.
1. Press Button C to go to the Lap Mode or Split
Mode.
2. Press Button D to start, stop and restart the
stopwatch as many times as required.
3. Press Button A to reset the stopwatch
Lap/Split Time Measurement
Up t o 99 lap/split times can be displayed,
among which the first 30 lap/split times can be
recorded during each measurement. In order
t o r e ca ll t h e r e c o r d e d l a p t i m e s a f t e r
measurement, use Memory Recall Funct ion
before resetting the stopwatch.
Lap Time Measurement
1. Press Button C to go to the Lap Mode.
2. Press Button D to start the stopwatch.
3. Press Button A to check lap times. The lap
time and its lap number are displayed in the
upper low of the display, while the total
running t ime, which is still in progress, is
displayed in the lower low of the display.
4. Press Button D to stop the measurement.
In order to check the recorded lap times,
refer to Memory Recall Function.
5. Press Button A to reset the stopwatch.
AM
LAP
[ ]
C
L a p
num ber Lap time
T otal r unni n g
t ime in pro g ress
D
C
B
When an item is selected for adjustment,
it starts flashing.
S ec o nd M in ut e Hour
Y ea r M on t hD at e 1 2- / 2 4- h o ur
display
‹ ‹
D
A
D D A
S t ar t S t op Reset
D D D A
D
R es e tS t ar t S t op Restart S t op
D A A D
St o pSt a r t Lap 1 Lap 2 Lap 3
A
A
Reset
Memory
Recall
F un c t ion
Up to L ap 99
L A P/ R ES E T
L I GH T
MODE
ST ART /ST OP
R EC A L L
AM/PM
i nd i ca t o r
Day of the
week
Hour
Minute
Second
M on t h
D at e
E
AB C D


Produkt Specifikationer

Mærke: Lorus
Kategori: Ur
Model: Y704E

Har du brug for hjælp?

Hvis du har brug for hjælp til Lorus Y704E stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ur Lorus Manualer

Lorus

Lorus VX7P Manual

22 August 2024
Lorus

Lorus VX9P Manual

20 August 2024
Lorus

Lorus Z021 Manual

19 August 2024
Lorus

Lorus Z004 Manual

19 August 2024
Lorus

Lorus Z015 Manual

18 August 2024

Ur Manualer

Nyeste Ur Manualer