Lorus YK61 Manual

Lorus Ur YK61

Læs nedenfor 📖 manual på dansk for Lorus YK61 (2 sider) i kategorien Ur. Denne guide var nyttig for 24 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

n C H A R A C T E R I S T I C S

1. Current Time Mode

Hour, minute and second indication with <Time>

choice of 12- hour format or 24-hour format.

Month, da te a nd da y of the week < Calen dar >

ind ication wit h choice of month-day format or

day-month format.

2. Stopwatch Mode: Measuring range up to 9 hours

59 minutes and 59.99 seconds in 1/100 -sec ond

increments. Accumulated elapsed time and lap

time measurement functions. Maximum of 10 lap

times storable in memory.

3. Alarm Mode: Daily alarm and hourly chime. Alarm

sound demonstration function.

4. Pacer Mode: Regular beeps at a pre- defined

rate within a range between 30 and 180 beats per

minute (bpm).

5. Countdown Timer Mode: Measuring range up to

23 hours 59 minutes in 1-second increments.

6. D u a l T i m e Mo d e :

H ou r, m i nu t e a n d se c on d

indication of the time in a different time zone area.

7. Illuminating light: The built-in electro-luminescent

(EL) light evenly illu minates the displa y for ea sy

viewing in darkness.

n B u T T o n S A n d d I S p l Ay

A (LIGHT)

B (START/STOP)

D (MODE) C (LAP/RESET)

To change the display mode, press But ton D. The

display mode changes in the following order.

Stopwa tch

n C u R R E n T T I m E m o d E

Choice of 12-Hour/24-Hour format

The time display format in either 12-hour indication

or 24-hour indication can be selected alternately

by pressing Button B. Under the 12-hour indication

fo r m a t , A M / P M i n di c a t o r ap p e a r s o n t h e

display.

How to set the time

1 Keep holding down Button D for 2 seconds to

change t he di splay to the T IME/CALENDAR

S ET T I N G m o d e. T he se c o n d di g i t s st a r t

flashing.

2 <Second setting >

Press Button B in accordance wit h a time

signal. T he second digit s are reset to“00”

and start counting immediately.

When the second digits count any number

from “30” to “59” and Button B is pressed,

one minute is added and the seconds are

immediately reset to “0 0.”

3 Press But ton B to confirm the second setting

and move on to the next item.

Selection of the item to be adjusted (flashing)

is made in the following order when Button B

is pressed.

4 To set the digits for each item, press Button

C. One digit (flashing) is increased with each

pressing of Button C. To move the digits quickly,

hold down the But ton.

5 Af t er al l t h e ad j ustm e nt s are com p let ed ,

press But ton B to return to the TIME/CALENDAR

mode.

n A l A R m m o d E

Press Button D once to go to the ALARM mode. The

ALARM mode indicator appears on the display.

Al a rm t i m e

(h o u r, m i n u t e )

Cu r r e n t t i m e

(h o u r, m i n u t e )

AL A R M m o d e

i n d i c a t o r

How to set the alarm

1. In the ALARM mode, press Button D for 2 seconds

to change the display to the ALARM SET TING

mode. The minute digits start flashing.

2. Press Button C to set the minute digits. One

digit (flashing) is increased with each press of

Button C. To move the digits quickly, hold down

the Button.

3. Press Button B to confirm the minute setting and

move on to the hour setting. The hour digits start

flashing.

4. Press But ton C to set the hour digits. One digit

(flashing) is increased with each press of Button

C. To move the digit s quickly, hold down the

Button.

5. Press Button D to complete the alarm setting

and return to the ALARM mode.

Turning the alarm ON/OFF

To turn the alarm ON or OFF. press Button C in the

ALARM mode. When the alarm is turned ON, the

ALARM mode indicator appears on the display.

W h e n t he a l a r m i s O N , t h e wa t ch b e e p s

for 2 0 s econds at t he des ignated a larm time

everyday.

Alarm sound test function

To test the alarm sound, keep holding down Button

B in the ALARM mode. The alarm will sound as long

as the button is pressed.

n pA C E R m o d E

Pre ss B ut t on D t wo time s to go t o t h e PAC ER

mode. T he PACER mode indicator appears on

the display.

The pacer function generates regular beeps at a

pre-defined rate, which can be set within a range

between 30 to 180 beats per minute (bpm). The

pacer and stopwatch can be activated at t he

same time.

How to set the pacer beeping rate

1. In the PACER mode, press Button D for 2 seconds

to change the display to the PACER SET T ING

mode. The beeping rate digits start flashing.

2. Press Button C to set the beeping rate digits.

Five digits (flashing) are increased with each

press of Button C. To move t he digits quickly,

hold down the But ton.

3. Press But ton D to complete the pacer beeping

rate set ting and return to the PACER mode.

Pa c e r

b e e p i n g r a t e

(b p m )

PAC E R m o d e

i n d i c a t o r

Mode

hold D D

Press C

to increase

the number

Hold C

to increase

the number

quickly

hold D D

Pacer Mode

Press C

to increase

the number

Hold C

to increase

the number

quickly

hold D

Press C

to increase

the number

Hold C

to increase

the number

quickly

NREYK61 11-2010

CAL. YK61 (R23 SERIES)

24 - ho u r i n d i c a t i o n 12 - ho u r i n d i c a t i on

Choice of month-day/day-month format

The calendar display format in either day-month

in d i ca t i o n o r mo nt h -d a y in d i ca t io n ca n b e

selected alternate ly by keeping holding down

Button B.

hold

d ay -m o n t h i n d i c a t i o n mo nt h - da y i n d i c a t i o n

Turning the hourly chime ON/OFF

To turn the hourly chime ON or OFF. press Button

C. When the hourly chime is turned ON, the chime

indicator appears on the display.

Ch im e i n d i c a t o r

How to use the pacer

1 In the PACER mode, press Button C to start the

pacer.

2 Press Button C again to stop the pacer.

Combined use of the pacer and stopwatch

functions

1 In the PACER mode, press But ton C to activate

the pacer function.

2 Pre ss But ton D to switch t he dis play to t he

STOPWATCH mode.

3 Press Button B to simultaneously start the pacer

and stopwatch. While the stopwatch is running,

the watch beeps at the preset rate.

3 To stop the pacer and stopwatch, press Button

65 beeps/

minutes

65 beeps/

minutes

Stopwatch

Stopwatch and Pacer

Started

Stopwatch and Pacer

Stopped

Mo n t hDa y o f t h e we e k Da t e

AM/ PM i n d i c a t o r H o u r M in u t e

S e c o n d

Produkt Specifikationer

Mærke:	Lorus
Kategori:	Ur
Model:	YK61

Har du brug for hjælp?

Hvis du har brug for hjælp til Lorus YK61 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ur Lorus Manualer

Lorus R23 SERIES - CAL Z013 Manual

23 August 2024

22 August 2024

20 August 2024

19 August 2024

19 August 2024

Lorus Dress RT333GX9 Manual

18 August 2024

Lorus Kids R2345MX9 Manual

18 August 2024

Lorus Z015 Manual

18 August 2024

Lorus Dress RM307DX9 Manual

17 August 2024

Lorus Sports RM367EX9 Manual

17 August 2024

Ur Manualer

Nyeste Ur Manualer

21 December 2024

21 December 2024

21 December 2024

21 December 2024

Casio GA-201-1A Manual

21 December 2024

Casio G-Shock GA-800-1AJF Manual

21 December 2024

Casio Vintage A1000RCB-1JR Manual

21 December 2024

Casio G-Shock GM-S2140 Manual

21 December 2024

Casio EFR-571MD Manual

21 December 2024

Casio Edifice EF-129D-2A Manual

21 December 2024