Mamiya ZD Manual

Mamiya Ikke kategoriseret ZD

Læs nedenfor 📖 manual på dansk for Mamiya ZD (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 13 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/2
NOTE
The memory card (SD memory card or compact flash card) that allows the
storage of photographed images is sold separately.
What’s in the box?
Take the camera and accessories out of the box and check that all items are included.
1
•Eye cup AE301
•Correcting lens standard DE301
•Finder screen type A SA301
•IR Cut filter YB301
•Body front cap KV401
2Names of parts
3Before you begin
1. Attach the provided strap on the hook (2 places) of the camera according to the
diagram.
4Preparing the camera
1. Set the date and time of the camera.
Place the shutter release mode switch lever to S (Single-Frame
Mode) and move the selection key lock lever to the ON position.
Display the menu by pressing the menu button and select
[ ] (Set up menu) using the [ ] of the selection key
and press [ ] on the selection key.
5Taking a photograph
1. Place the shutter release mode switch lever to S (Single-Frame Mode) and move
the focus mode switch “S” (single focus) position.
NOTE
When the charging lamp stops flashing and stays lit, charging is complete.
The first charging session after purchase will be complete in approximately
2 hours.
Mamiya ZD Camera
•Neck strap CN301
•IEEE1394 cable BL301
Lithium ion battery BA701Battery charger DE-975A
Power cord
Mamiya Digital PhotoStudioBS301
(RAW Data development software)
IR Cut filter case Filter replacement guide
Mamiya ZD
Setup Guide (this document)
Mamiya Digital PhotoStudio
User’s Manual
Mamiya ZD
User’s Manual
2. Charge the provided battery.
Connect the power cord into the battery charger and then the power plug to the
outlet. The Power lamp will light.
When the battery is set in the battery charger as shown in the diagram, the charging
lamp will flash and the battery charging will start automatically.
Shutter release mode switch lever Focus mode switch lever
2. Turn the front dial (or rear dial) while pressing the
light adjustment mode button and set to “Average /
partial area automatic switching metering”.
Front dial
Metering mode button
Upper LCD
3. Turn the front dial while pressing the exposure
mode button and set to “P (program mode)”.
Exposure mode button
Front dial
Upper LCD
4. Turn the rear dial while pressing the Image quality selection
button and set the stored image quality to “RAW”.
Screen quality selection button Rear dial
Digital LCD panel
5. Turn the rear dial (or front dial) while pressing
the ISO button and set ISO reception to “50”. ISO button Rear dial
Digital LCD panel
6. Turn the front dial while pressing the white balance
button and set to “AWB” (auto white balance).
7. Hold the camera so that the subject is within the focus frame and press the
shutter release button halfway. Once the focus match mark is lit, fully press
the shutter release button and take the photograph.
6Displaying and deleting images
(Displayed on the LC monitor)
Displaying images
1. Push the monitor button after taking the
photograph.
The most recently photographed image will be
displayed on the LC monitor.
Pressing the shutter release button will automatically
return the camera setting to photography mode.
Deleting images
1. Push the monitor button.
The most recently photographed image will be displayed on the LC monitor.
2. Display the image to be deleted using the [ ] of the selection key.
3. Push the delete button.
4. Using the [ ] of the selection key, select “1 frame” or “All images” and press
the OK button. A message confirming image deletion will be displayed. Select
OK to perform deletion.
Monitor button Delete button
NOTE
Deleted images cannot be displayed again.
White balance button
Front dial
Digital LCD panel
●The reverse side illustrates how to develop the photographed images by
uploading the images onto the computer using the attached “Mamiya Digital
PhotoStudio” photo developing software.
●Please read the following. Reverse side
C u r r e n t 2 0 0 6 / 0 3 / 1 9 1 4 : 4 6
O K : S e t
9 D a t e / T i m e
S e t D a t e / T i m e
S e l e c t
Y e a r 2 0 0 6
M o n t h 3
D a t e 1 9
H o u r 1 4
M i n u t e 4 6
9 D a t e / T i m e
O K
Y e a r 2 0 0 6
M o n t h 3
D a t e 1 9
H o u r 1 4
M i n u t e 4 6
9 D a t e / T i m e
O K
OK button
Selection key lock lever
1 Using the [ ] of the selection key,
select the [9] “Set Date/Time” and
press the OK button.
2 The current time and date will be displayed. Press the OK
button to complete.
3 Set the year using the [ ] of the selection key.
4 Once the year is set, use the [ ] of the selection key in order
to set the month. Set the day/hour/minute accordingly. Press
the OK button to confirm the settings.
2. Insert the separately sold memory card.
Open the memory card slot cover of the camera and firmly insert the memory card as
shown in the diagram. Close the memory card slot cover.
NOTE
The SD memory card and the compact flash card (CF card/MD: Micro drive)
can be used as memory cards. Use a memory card with a capacity of 256
MB or over.
3. Format the inserted memory card.
Display the menu by pressing the menu button and select [ ] (Set up menu)
using the [ ] of the selection key and press [ ] on the selection key.
1 Using the [ ] of the selection key, select the [11] “Format” (card formatting)
and press the OK button.
2 Using the [ ] of the selection key, select the slot with the memory card
inserted (SD card or CF card) and press the OK button.
3 A message confirming formatting will be displayed. Press the OK button. Press
the cancel button in order to cancel formatting. Pressing the cancel button will
direct the screen to step 2.
Charging lamp
Power lamp
Top
Top
Compact flash card
(CF card/MD: Micro drive) slot.
SD memory card slot
0 S l o t 1 S D
1 S l o t 2 C F
1 1 F o r m a t
O K
NOTE
All images within the memory card will be deleted when formatted.
4. Remove the camera front cap and lens front/rear
caps.
The body front cap of the camera is removed by turning
the body front cap in the direction of the arrow while
pressing the lens removal button.
5. Attach the lens.
Match the lens attachment index and camera lens
attachment/removal index and turn until a clicking noise
is heard.
Lens removal button
Lens attachment / removal guideline
●This setup guide illustrates how to use this product with the most
basic settings.
●The reverse side illustrates how to develop the photographed
images by uploading the images onto the computer using the
attached photo developing software.
●Refer to the User’s Manual for details.
LCD monitor
ISO button
Screen quality
selection button
Strobe light adjustment and correction
button / Cancel button / Self timer timing
setting button
AE lock button / OK button
Rear dial
White balance button
Digital LCD panel
Selection key
Selection key lock lever
Menu button / Day mode/
night mode switch button
Delete button
Image protect button
Memory card slot cover
Monitor button
Zoom button
Information button
Card access lamp
AE lock
button Mirror Lens removal
button
Focus mode
switch lever
Preview button
Lens attachment / removal guideline
Mirror up
button
Digital dial
lock button
Upper LCD
Auto bracket
mode button
Hot shoe
Exposure
correction button
Eye piece shutter
LCD back light
button
Front dial
Shutter release
button
Shutter release mode
switch lever
Metering
mode button
View
adjustment
knob
Eye cup attachment /
removal lever Exposure mode
button
Support release point
●This s etup guide illus trates how to use this product with the mos t
bas ic settings.
●The revers e side illus trates how to develop the photo graphed
images by uploading the images onto the co mputer us ing the
attached pho to dev eloping s o ftware.
●Refer to the User’
ils.
Mamiy a Digital Camera
User’s Man ual
User’s Man
• Battery charger DE-975A User’s Manual
• Lithium ion battery BA701 User’s Manual
• IR Cut filter/Low Pass filter User’s Manual
English

Produkt Specifikationer

Mærke: Mamiya
Kategori: Ikke kategoriseret
Model: ZD

Har du brug for hjælp?

Hvis du har brug for hjælp til Mamiya ZD stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Mamiya Manualer

Mamiya

Mamiya MSX Manual

13 August 2024
Mamiya

Mamiya 645 AFD II Manual

13 August 2024
Mamiya

Mamiya 645 ZD Back Manual

12 August 2024
Mamiya

Mamiya ZD Manual

11 August 2024
Mamiya

Mamiya ZD Back Manual

11 August 2024
Mamiya

Mamiya DSX Manual

10 August 2024
Mamiya

Mamiya 645 E Manual

9 August 2024
Mamiya

Mamiya Credo 2.5 Manual

8 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Native Instruments

Native Instruments Plasma Manual

4 November 2024
Wagner

Wagner 2K Smart Manual

4 November 2024
Moen

Moen EB500-E Manual

3 November 2024
Moen

Moen Aspen 5824CH Manual

3 November 2024
Luxman

Luxman MQ-88uSE Manual

3 November 2024
Luxman

Luxman CL-38uSE Manual

3 November 2024
Luxman

Luxman CL-1000 Manual

3 November 2024
Moen

Moen Aspen 5802CH Manual

3 November 2024
Luxman

Luxman SQ-38u Manual

3 November 2024
Moen

Moen Aspen 5818CH Manual

3 November 2024