Marshall Electronics CV620-TBI Manual

Marshall Electronics Videokonferencesystem CV620-TBI

Læs nedenfor 📖 manual på dansk for Marshall Electronics CV620-TBI (1 sider) i kategorien Videokonferencesystem. Denne guide var nyttig for 3 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/1

Marshall Electronics, Inc. | 20608 Madrona Avenue, Torrance, CA 90503 USA

Phone: Toll Free: (310) 333-0606 | (800) 800-6608 | (310) 333-0688 | Fax: Support@marshall-usa.com

Quick Setup & Operation of Marshall IP Cameras

Please find quick setup instructions below for Marshall IP camera models; CV630-IP/IPW, CV730-BK/WH,

CV620-BI/WI, CV355-30X-IP, CV420-30X-IP and CV420-30X

1. Marshall IP Cameras are set to a Static (fixed) IP address from factory (DHCP turned OFF) as the

default. Static IP address is set to 192.168.100.100

2. May need to set your computer to a different static IP address for instance 192.168.100.99 (or

other), done to ensure that computer is set to the same fixed IP address as the camera. not

3. Open a web browser and enter the camera’s default IP

address: 192.168.100.100

4. Login Menu will appear where you will enter administrator’s

account and password. Default is set to Account: and admin

Password: 9999

5. You now have operational control of the camera with preview

and ability to change settings.

For use with , follow these instructions: DHCP

1. After performing the above steps, use the web browser to

enter the cameras settings, select under Settings Network u

and change the camera to DHCP then push . On Apply y

2. Change your computer to . DHCP

3. Computer IP address will automatically be assigned by your

router network, so you may not know what it gets changed to.

4. To find the Camera’s DHCP address there are

several methods of discovery, one way would be to

use Onvif Device Manager. Another would be to use the Video Management Software

(VMS) downloadable from website product page (see image to left).

5. If ONVIF devise manager is preferred, download the Onvif program from the link below and use it

to discover the IP address of your camera. : Onvif is not a Marshall Electronics product, but is NOTE

widely used, and considered to be a safe free download.

Onvif Device Manager: https://sourceforge.net/projects/onvifdm/

The connected camera model# should appear during discovery process, select and control.

PLEASE : If your camera model comes with an IR remote, you can make necessary IP changes in OSD Menu as well. If you NOTE

have any questions or need additional assistance with the setup, please call 800-800-6608 ext. 1129

Produkt Specifikationer

Mærke:	Marshall Electronics
Kategori:	Videokonferencesystem
Model:	CV620-TBI

Har du brug for hjælp?

Hvis du har brug for hjælp til Marshall Electronics CV620-TBI stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Videokonferencesystem Marshall Electronics Manualer

Marshall Electronics CV730-NDIW Manual

9 September 2024

Marshall Electronics CV620-WI Manual

9 August 2024

Marshall Electronics CV420E Manual

4 August 2024

Marshall Electronics CV355-10X Manual

4 August 2024

Marshall Electronics CV620-TWI Manual

2 August 2024

Marshall Electronics CV6050-WH Manual

30 Juli 2024

Marshall Electronics CV630-NDI Manual

29 Juli 2024

Marshall Electronics CV620-BI Manual

28 Juli 2024

Marshall Electronics CV620-BK4 Manual

28 Juli 2024

Marshall Electronics CV620-WH4 Manual

27 Juli 2024

Videokonferencesystem Manualer

Nyeste Videokonferencesystem Manualer

Viewsonic TeamJoin TRS10 Manual

4 November 2024

10 Oktober 2024

21 September 2024

21 September 2024

21 September 2024

21 September 2024

21 September 2024

21 September 2024

Sony FWA-CE100 Manual

10 September 2024

B-Tech BT8707 Manual

6 September 2024