Marshall Electronics CV620-TWI Manual


Læs nedenfor 📖 manual på dansk for Marshall Electronics CV620-TWI (1 sider) i kategorien Videokonferencesystem. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Marshall Electronics, Inc. | 20608 Madrona Avenue, Torrance, CA 90503 USA
Phone: Toll Free: (310) 333-0606 | (800) 800-6608 | (310) 333-0688 | Fax: Support@marshall-usa.com
Quick Setup & Operation of Marshall IP Cameras
Please find quick setup instructions below for Marshall IP camera models; CV630-IP/IPW, CV730-BK/WH,
CV620-BI/WI, CV355-30X-IP, CV420-30X-IP and CV420-30X
1. Marshall IP Cameras are set to a Static (fixed) IP address from factory (DHCP turned OFF) as the
default. Static IP address is set to 192.168.100.100
2. May need to set your computer to a different static IP address for instance 192.168.100.99 (or
other), done to ensure that computer is set to the same fixed IP address as the camera. not
3. Open a web browser and enter the camera’s default IP
address: 192.168.100.100
4. Login Menu will appear where you will enter administrator’s
account and password. Default is set to Account: and admin
Password: 9999
5. You now have operational control of the camera with preview
and ability to change settings.
For use with , follow these instructions: DHCP
1. After performing the above steps, use the web browser to
enter the cameras settings, select under Settings Network u
and change the camera to DHCP then push . On Apply y
2. Change your computer to . DHCP
3. Computer IP address will automatically be assigned by your
router network, so you may not know what it gets changed to.
4. To find the Camera’s DHCP address there are
several methods of discovery, one way would be to
use Onvif Device Manager. Another would be to use the Video Management Software
(VMS) downloadable from website product page (see image to left).
5. If ONVIF devise manager is preferred, download the Onvif program from the link below and use it
to discover the IP address of your camera. : Onvif is not a Marshall Electronics product, but is NOTE
widely used, and considered to be a safe free download.
Onvif Device Manager: https://sourceforge.net/projects/onvifdm/
The connected camera model# should appear during discovery process, select and control.
PLEASE : If your camera model comes with an IR remote, you can make necessary IP changes in OSD Menu as well. If you NOTE
have any questions or need additional assistance with the setup, please call 800-800-6608 ext. 1129


Produkt Specifikationer

Mærke: Marshall Electronics
Kategori: Videokonferencesystem
Model: CV620-TWI

Har du brug for hjælp?

Hvis du har brug for hjælp til Marshall Electronics CV620-TWI stil et spørgsmål nedenfor, og andre brugere vil svare dig




Videokonferencesystem Marshall Electronics Manualer

Videokonferencesystem Manualer

Nyeste Videokonferencesystem Manualer

Yealink

Yealink UVC84 Manual

10 Oktober 2024
B-Tech

B-Tech BT8538 Manual

21 September 2024
B-Tech

B-Tech BT8710 Manual

21 September 2024
B-Tech

B-Tech BT8711 Manual

21 September 2024
B-Tech

B-Tech BT8712 Manual

21 September 2024
B-Tech

B-Tech BT8708 Manual

21 September 2024
B-Tech

B-Tech BT8706 Manual

21 September 2024
Sony

Sony FWA-CE100 Manual

10 September 2024
B-Tech

B-Tech BT8707 Manual

6 September 2024