Marshall Electronics RS7-HR Manual

Marshall Electronics AV forlænger RS7-HR

Læs nedenfor 📖 manual på dansk for Marshall Electronics RS7-HR (11 sider) i kategorien AV forlænger. Denne guide var nyttig for 18 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/11

RS7-HR

Installation Guide

HARDWARE OVERVIEW

RS7-HR CONNECTION

34 5 6 7

Power Indicator

Controller Input

Connection refresh

Output Connection

RS232 / RS422 Selector

Firmware Service Port

DC Power Connection

The RS7-HR can be set on a desk top or you can use the included 1RU rack ears to install a rack.

Please note the following:

• Before connecting your equipment please select RS232 or RS422 on the back of the unit

• Connect your controller to the Input connection on the front of the RS7-HR using a Cat 5/6 cable

• On the back of the RS7-HR connect your Cat 5/6 cables from the RS7-HR to each camera (you

may need optional CV620-CABLE-07 Adapters for RS232)

• You will now connect power to the RS7-HR, you will see a red indicator light appear on the front

of the unit, now you will push the refresh button once

• If you disconnect a camera or add a camera you will need to push the refresh button again

RS232 / RS422 Pin Instructions

VS-PTC-IP

RS7-HR

RS422

Cat 6

RS422

Produkt Specifikationer

Mærke:	Marshall Electronics
Kategori:	AV forlænger
Model:	RS7-HR
Type:	AV sender & modtager
Tænd-/slukkontakt:	Ja
Produktfarve:	Sort
Maksimal opløsning:	- pixel
Forbindelsesteknologi:	Ledningsført
Strømkilde:	DC
LED-indikatorer:	Nulstil
Maksimal overførselsafstand:	200 m
Kapabilitet:	Marshall Electronics CV610-U3/W-V2, CV620-BK4/WH4, CV612HT-4K, CV630-IP/IPW, CV630-NDI/NDIW, CV730-BK/WH, CV730-NDI/NDIW
10G understøttelse:	Ingen
Stativ-montering:	Ja
Seriel grænsefladetype:	RS-422
RS-232 indgangsporte:	1
Antal serielle porte:	7
Transmissionsafstand:	100 m
Stabelbar:	Ja
RS-232 udgangsporte:	7
Understøttede kabeltyper:	Cat6