Megaman L0502CB Manual

Megaman Lettelse L0502CB

Læs nedenfor 📖 manual på dansk for Megaman L0502CB (7 sider) i kategorien Lettelse. Denne guide var nyttig for 24 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/7
We apologise for any text or photo errors and any changes of
technical data.
If you have any questions concerning technical problems please
contact our Customer Service Department.
GREAT BRITAIN
For consumer contact, please visit www.clasohlson.co.uk and click
on customer service.
Internet: www.clasohlson.co.uk
Lamp module x 2
Connecting parts x 3
Mains lead (2 metres)
Connecting adaptor
Attachment clips
Lightning Set
Art.no. 36-2425
Model: L0502CB
Please read the entire instruction manual before using and save
it for future use.
Product Description
Lightning Set with energy saving lamps.
- The modules can be connected with the included adaptor.
- Several possible combinations.
- For 230 V Mains cord
Comes with
2 lamps (not pictured)
Switch module x 1
Safety
- All installation of electrical products must be preformed
correctly to avoid danger to life. The installation should
only be performed by persons with knowledge of electrical
wiring. If unsure, contact a qualied electrician.
- The product is made only for use indoors.
- The product may not be mounted so it is exposed to
moisture or humidity.
- Use only the included or recommended power cable.
Installation
The modules can be combined by desire according to gure A
and B.
4. Secure the modules with help of the included attachment
clips stored underneath the modules (see gure D).
Remove the attachment clips that are not being used.
5. Install the module in desired place. Screw the included
screws in the holes underneath the lamps.
6. Insert the lamps in the light module. Place the lamps
according to gure A and turn gently anticlockwise until the
lamps lock.
7. Put the power cable in the switch module according to
gure C.
Figure A
Figure B
8. Connect the power cable plug into a wall socket.
9. Light up the lamp by pressing the switch on the switch
module.
Care and Maintenance
- Use a soft damp cloth to wipe the product.
- Always unplug when cleaning or moving the light module.
Disposal
Follow local ordinances when disposing of this product. If you
are unsure about how to dispose of this product contact your
municipality.
Specications
Total length: 545 mm
Width: 80 mm
Thickness: 24 mm
Colour: White
Material: Plastic
Sealing class: IP20
Operating voltage: 230 V AC, 50 Hz
Lamp: Max 9 W GX53 low energy lamp
1. Always disconnect the power cable from the mains and light
tting before the installation.
2. Remove the included adaptors from the bottom side of the
modules.
3. Connect desired modules together with the adaptors
according to gure C. Remove the adaptors not being used.
Figure C
Figure D
EN
F
Ver. 001-200710


Produkt Specifikationer

Mærke: Megaman
Kategori: Lettelse
Model: L0502CB

Har du brug for hjælp?

Hvis du har brug for hjælp til Megaman L0502CB stil et spørgsmål nedenfor, og andre brugere vil svare dig




Lettelse Megaman Manualer

Lettelse Manualer

Nyeste Lettelse Manualer

Gemini

Gemini GDL13T Manual

16 December 2024
Gemini

Gemini GDL250 Manual

16 December 2024
Fuzzix

Fuzzix Orion Manual

16 December 2024
Sea&Sea

Sea&Sea YS-D3 Manual

16 December 2024
Cateye

Cateye TL-LD600 Manual

16 December 2024
Cateye

Cateye Orb SL-LD160-R Manual

16 December 2024