Midea MSXE-19CRDN8 Manual

Midea Klimaanlæg MSXE-19CRDN8

Læs nedenfor 📖 manual på dansk for Midea MSXE-19CRDN8 (116 sider) i kategorien Klimaanlæg. Denne guide var nyttig for 11 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/116
MODEL NUMBER:
MSXE-10CRDN8
MSXE-13CRDN8
MSXE-19CRDN8
MSXE-25CRDN8
USER MANUAL
Room Air Conditioner
War oning n tices: fore u n Be si g t is ph rodu ,ct please read this manual nd a SAFETY
M UA anAN L(if y) carefully and keep it for future reference. Th ee d sign and
specifications are su cbje t to cha e ng wit t prihou or notice for pro rduct imp ove n me t.
C yoonsult with ur de eal r o ufacture fo ar man r r det ils.The diagra above usm is j t for
reference. Please take h t e appearanc oe f the actual product a hs t e standard.
01
THANK YOU LETTER
Thank you for choosing Midea! Before using your new Midea product, please
read this manual thoroughly to ensure that you know how to operate the
CONTENTS
01
02
06
07
08
10
20
29
25
31
32
34
34
39
49
54
54
51
55
33
THANK YOU LETTER
SAFETY PRECAUTIONS
SPECIFICATIONS
PRODUCT OVERVIEW
PRODUCT INSTALLATION
Install Your Indoor Unit
Install Your Outdoor Unit
Refrigent Piping Connection
Air Evacuation
Electrical And Gas Leak Checks
Test Run
Packing And Unpacking The Unit
OPERATION INSTRUCTIONS
Indoor Unit Display
Remote Control Operation
CARE AND MAINTENANCE
TROUBLESHOOTING
TRADEMARKS, IG COPYR HTS AND LEGAL STATEMENT
DISPOSAL AND RECYCLING
DATA PROTECTION NOTICE
04
WARNINGS FOR PRODUCT INSTALLATION
Installation must be performed by an authorized dealer or specialist. Defective
installation can cause water leakage, electrical shock, or fire.
Installation must be performed according to the installation instructions.
(In North America, installation must be performed in accordance with the
requirement of NEC and CEC by authorized personnel only).
Improper installation can cause water leakage, electrical shock, or fire.
Contact an authorized service technician for repair or maintenance of this unit.
This appliance shall be installed in accordance with national wiring regulations.
Only use the included accessories, parts, and specified parts for installation.
Using non-standard parts can cause water leakage, electrical shock, fire, and
can cause the unit to fail.
Install the unit in a firm location that can support the unit’s weight. If the chosen
location cannot support the unit’s weight, or the installation is not done properly,
the unit may drop and cause serious injury and damage.
Install drainage piping according to the instructions in this manual. Improper
drainage may cause water damage to your home and property.
For units that have an auxiliary electric heater, do not install the unit within 1
meter (3 feet) of any combustible materials.
Do not install the unit in a location that may be exposed to combustible gas
leaks. If combustible gas accumulates around the unit, it may cause fire.
Do not turn on the power until all work has been completed.
When moving or relocating the air conditioner, consult experienced service
technicians for disconnection and reinstallation of the unit.
How to install the appliance to its support, please read the information for
details in "indoor unit installation" and "outdoor unit installation" sections .
TAKE NOTE OF FUSE SPECIFICATIONS
The air conditioners circuit board (PCB) is designed with a fuse to provide
overcurrent protection. The specifications of the fuse are printed on the circuit
board , such as : T3.15AL/250VAC, T5AL/250VAC, T3.15A/250VAC, T5A/250VAC,
T20A/250VAC, T30A/250VAC,etc.
NOTE: For the units with R32 refrigerant , only the blast-proof ceramic fuse can be
used.
UV-C lamp(Applicable to the unit contains an UV-C lamp only)
This appliance contains a UV-C lamp. Read the maintenance instructions before
opening the appliance.
Do not operate UV-C lamps outside of the appliance.
Appliances that are obviously damaged must not be operated.
Unintended use of the appliance or damage to the housing may result in the
escape of dangerous UV-C radiation. UV-C radiation may, even in small doses,
cause harm to the eyes and skin.
Before opening doors and access panels bearing the ULTRAVIOLET RADIATION
hazard symbol for the conducting USER MAINTENANCE, it is recommended to
disconnect the power.
The UV-C lamp can not be cleaned, repaired and replaced.
UV-C BARRIERS bearing the ULTRAVIOLET RADIATION hazard symbol should
not be removed.
This appliance contains an UV emitter. Do not stare at the
light source.
WARNING
05
Turn o the air conditioner and disconnect the power if you are not going to use
it for a long time.
Turn o and unplug the unit during storms.
Make sure that water condensation can drain unhindered from the unit.
Do not operate the air conditioner with wet hands. This may cause electric shock.
Do not use device for any other purpose than its intended use.
Do not climb onto or place objects on top of the outdoor unit.
Do not allow the air conditioner to operate for long periods of time with doors or
windows open, or if the humidity is very high.
Do not clean the air conditioner with combustible cleaning agents. Combustible
cleaning agents can cause fire or deformation.
Turn o the device and disconnect the power before cleaning. Failure to do so
can cause electrical shock.
Do not clean the air conditioner with excessive amounts of water.
CAUTION
CLEANING AND MAINTENANCE WARNINGS
Note about Fluorinated Gasses(Not applicable to the unit using R290 Refrigerant)
This air-conditioning unit contains fluorinated greenhouse gasses. For specific
information on the type of gas and the amount, please refer to the relevant label
on the unit itself or theOwner's Manual - Product Fiche in the packaging of the
outdoor unit. (European Union products only).
Installation, service, maintenance and repair of this unit must be performed by a
certied technician.
Product uninstallation and recycling must be performed by a certified technician.
For equipment that contains fluorinated greenhouse gases in quantities of 5
tonnes of CO2 equivalent or more, but of less than 50 tonnes of CO2 equivalent,
If the system has a leak-detection system installed, it must be checked for leaks at
least every 24 months.
When the unit is checked for leaks, proper record-keeping of all checks is strongly
recommended.
WARNING FOR USING R32/R290 REFRIGERANT
2
2
2
2
2
When flammable refrigerant are employed, appliance shall be stored in a well -
ventilated area where the room size corresponds to the room area as speciec
for operation.
For R32 frigerant models:
Appliance shall be installed, operated and stored in a room with a floor area larger
than 4m .
For R290 refrigerant models, appliance shall be installed, operated and stored in a
room with a floor area larger than:
<=2.6kW units: 17.33m
>2.6kW and <=3.5kW units: 25.4m
>3.5kW and <=5.2kW units: 34.67m
>5.3kW and <=7.1kW units: 47.33m
Reusable mechanical connectors and flared joints are not allowed indoors.
07
Gloves Screwdriver &
wrench
Goggles & masks Vinyl tape
It would be perfect you had these tools
Wall Mounting Plate
(1) (2)
Power Cable(some units)
Refrigerant Piping
Signal Cable
Remote Controller
Drainage Pipe
Louver
Remote controller Holder
(some units)
Functional Filter (On Back of
Main Filter - Some Units)
Front Panel
Outdoor Unit Power Cable
(some units)
1
2
3
4
5
6
7
8
9
10
11
910
Illustrations in this manual are for explanatory purposes. The actual shape of your indoor unit may
be slightly dierent. The actual shape shall prevail.
NOTE ON ILLUSTRATIONS:
3
6
7
8
11
1
5
2
4
PRODUCT OVERVIEW
Air-break
switch
3
1
5
6
7
8
11
2
4
Hammer
drill
Core drill
09
INSTALLATION SUMMARY - INDOOR UNIT
Drill Wall Hole
Mount Indoor Unit
Wrap Piping and Cable
(Not applicable for some locations in North America )
Connect Piping
Prepare Drain Hose
Connect Wiring
(Not applicable for some
locations in North America )
4 5 6
7
9
8
Select Installation Location
1
Determine Wall Hole Position
2
Attach Mounting Plate
3
12cm
(4-3/4")
12cm
(4-3/4")
2.3m (7/8")
15cm (5-7/8")
11
Determine wall hole location
Correct orientation of Mounting Plate
Remove the screw that attaches the
mounting plate to the back of the
indoor unit.
Secure the mounting plate to the wall
with the screws provided. Make sure
that mounting plate is flat against the wall.
Drill wall hole for connective piping
2
Screw
Step 1Step 4
Step 2
Step 3
Confirm the mounting plate you own. Determine the
location of the wall hole based on the position of the
mounting plate.The dotted rectangular box above
shows the size of your product.
Type A Type B
Dierent models have dierent mounting plates.
For the dierent customization requirements, the
shape of the mounting plate may be slightly
dierent. But the installation dimensions are the
same for the same size of indoor unit.
See Type A and Type B for example .
230mm(9.1in)
165mm(6.5in) 527mm(20.7in)
247mm(9.7in)
106mm(4.2in)
48mm(1.9in)
29mm(1.1in)
37mm
(2.1in)
139mm
(5.5in)
W
W
W
179mm(7.1in)
348.4mm(13.7in)
231mm(9.1in)
403mm(15.9in)
H
H
H
49mm(1.95in)
47mm(1.8in)
47mm(1.8in)
37mm
(1.45in)
36mm
(1.4in)
36mm
(1.4in)
49mm
(1.95in)
H
53mm
(2.1in)
53mm
(2.1in)
48mm
(1.9in)
101mm(4.0in)
W
190mm(7.5in)
190mm(7.5in)
136mm(5.4in)
121mm(4.8in)
121mm(4.8in)
244mm(9.6in) 246mm(9.7in)
418mm(16.5in)
Indoor unit dimensions(WxH):
729mm(28.7in)x292mm(11.5in)
Indoor unit dimensions(WxH):
805mm(31.7in)x295mm(11.6in)
Indoor unit dimensions(WxH):
835mm(32.9in)x295mm(11.6in)
Indoor unit dimensions(WxH):
971mm(38.2in)x321mm(12.6in)
Φ65mm (2.5in)
Φ65mm (2.5in)
Φ65mm (2.5in)
Φ65mm (2.5in)
16
4. Facing the back of the unit, remove the plastic
panel on the bottom left-hand side.
5. Feed the signal wire through this slot, from
the back of the unit to the front.
6. Facing the front of the unit, connect the wire
according to the indoor unit’s wiring diagram,
connect the u-lug and rmly screw each wire
to its corresponding terminal.
7. After checking to make sure every connection
is secure, use the cable clamp to fasten the
signal cable to the unit. Screw the cable clamp
down tightly.
8. Replace the wire cover on the front of the
unit, and the plastic panel on the back.
In North America
Terminal block
Wire cover
Screw
Cable clamp
NOTE: Choose the cable type according to the local
electrical codes and regulations. Please choose the
right cable size according to the Minimum Circuit
Ampacity indicated on the nameplate of the unit.
1. Facing the back of the unit, remove the big plastic
konck-out panel to create a slot through which the
conduit tube can be installed.
NOTE:For the units with ve-core cable, remove
the middle small plactic knock-out panel to create
a slot through which the cable can exit.
Use needle nose pliers if the plastic panel is too
dicult to remove by hand
2. As shown in the illustration, insert the wires
including the ground wire into the conduit
and secure them with lock nut onto the conduit
mounting plate.
3. Match wire colors with terminal numbers on indoor
and outdoor unit’s terminal blocks andrmly
screw wires to the corresponding terminals.
4. Connect the ground wires to the corresponding
terminals.
5. Pull the wires and check that the wires are
securelyxed to the terminal block.
DO NOT MIX UP LIVE AND NULL WIRES
This is dangerous, and can cause the air
conditioning unit to malfunction.
Conduit
Knock-out panel
Back view
18
Mount indoor unit
6
If you have already passed the refrigerant piping through the hole in the wall, proceed to Step 4.
Otherwise, double-check that the ends of the refrigerant pipes are sealed to prevent dirt or foreign
materials from entering the pipes.
Slowly pass the wrapped bundle of refrigerant pipes, drain hose, and signal wire through the hole
in the wall.
Hook the top of the indoor unit on the upper hook of the mounting plate.
Check that unit is hooked firmly on mounting by applying slight pressure to the left and right-hand
sides of the unit. The unit should not jiggle or shift.
Using even pressure, push down on the bottom half of the unit. Keep pushing down until the unit
snaps onto the hooks along the bottom of the mounting plate.
Again, check that the unit is firmly mounted by applying slight pressure to the left and the right-hand
sides of the unit.
Put pipes in wall hole Hook it and press down
lightly to secure
Check that the unit is
firmly mounted
Drain
hose
Connecting
cable
Hook it
If you installed new connective piping to the outdoor unit, do the following:


Produkt Specifikationer

Mærke: Midea
Kategori: Klimaanlæg
Model: MSXE-19CRDN8

Har du brug for hjælp?

Hvis du har brug for hjælp til Midea MSXE-19CRDN8 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Klimaanlæg Midea Manualer

Midea

Midea MSFAAU-10CRFN8 Manual

18 Februar 2025
Midea

Midea MAW10U1QWT Manual

18 Februar 2025
Midea

Midea MSXE-19CRDN8 Manual

17 Februar 2025
Midea

Midea MAW08S1DWBL Manual

12 Februar 2025
Midea

Midea MAW10S1DWBL Manual

12 Februar 2025
Midea

Midea MAW12S1DWWT Manual

12 Februar 2025
Midea

Midea MSMF-13CRN8 Manual

11 Februar 2025
Midea

Midea MPPD30C Manual

24 December 2024
Midea

Midea MAP08S1JWT-B Manual

5 December 2024
Midea

Midea MAP07S1AWT Manual

5 December 2024

Klimaanlæg Manualer

Nyeste Klimaanlæg Manualer