Monoprice MHD 10159 Manual

Monoprice Sportscam MHD 10159

Læs nedenfor 📖 manual på dansk for Monoprice MHD 10159 (2 sider) i kategorien Sportscam. Denne guide var nyttig for 16 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

MHD Action Camera User Manual

Product ID: 10159

1. eatures FKey

• Record 1080pfull HD video up to resolution at 30 frames per second with audio

• Can record up to 3 hours of 1080p video on a 32GB MicroSD card (not included)

• 5 Capture still images with a 3, , or 16 megapixel resolution

• - - 3 The built in 1050mAh Li ion battery provides up to hours of continuous use

• Waterproof up to 10 meters depth without using any extra casing

2. Package Contents

Carefully unpack and ensure that you have the following items:the package

1 6 Camera B ody Mounting Clip Screw Key

2 7 Back Cover Mounting Clip Ball Joint

3 8 USB - A to mini B Cable Handlebar Mount

4 9 Security Strap Carry Pouch with Belt Loop

5 10 1/4"- 20 UNC Mounting Clip User Manual

3. Function al Parts

C amera Lens

High quality lens

LED I ndicator

Displays the camera status

3 Power / Shutter Button

1. Turns the camera on or off

2. Takes a single photograph

Record & Stop Slide Switch

Slide to start or stop video recording

Camera Cover Back

Rotate and lock to seal the camera

Tripod Socket

Standard 1/4" x 20 UNC attachment socket

Lanyard Through - Hole

Attachment point for security lanyard or strap

Cover Lock

Locks the back cover in place

Micro HDMI Port

Connect the camera to TV with an HDMI cable

10 Video Resolution Slide

Switch

Se F lect the video resolution: HD or HD

MicroSD Card Slot

Accepts a MicroSD card up to 32GB for storage

Reset

Resets the camera to the factory defaults

13 Mini USB Port

1. Connect to r for data transfer or a compute

camera setup

2. Charge the internal batterys

4 t . Using he Camera

4.1 Charging up Your Camera

Charge the camera by connecting it to a 5 VDC USB charging source. The red LED

illuminates to indicate the camera is charging and turns off as soon as the camera is fully

charged. It takes about 2 hours to fully charge the camera.

4 .2 Inserting a Memory Card

Insert a MicroSD card (not included) before using your camera. Ensure that the camera

power is turned OFF before inserting the card into the slot .or removing it

Notes

1. There is only one correct direction to insert the

MicroSD card into the slot. Do not force the card into

the card slot as it may damage both the camera and

the MicroSD card.

2. A new MicroSD card should be formatted before

using. For more information, please see section 5.

4 .3 Set up Date and Time

You can set the camera’s clock with the utility software to ensure that your video and photo

files are saved with the correct date/ time information.

To set up the camera clock

1. Connect the camera to your Windows or Mac computer using the supplied USB

cable.

2. Open the Windows or Mac software utility. Refer to section 5.2 for full details on how

to run the utility programs.

3. Locate the “Date and Time” options near the bottom of the window. Click the "Set"

button.

4. the Manually adjust the date and time or click “Sync with PC” button set the camera

to the same time as your PC.

5. Click “OK” to save the settings.

6. After you have made the change, immediately disconnect the camera from the PC.

This will cause the changes to take effect.

4 .4 Sealing Your Camera

The Waterproof Housing lets the camera perform at depths up

to 10 meters (about 30 feet) under water. You must seal the

camera with in order to protect the camera when B Cack over

using it in wet or moist conditions.

To secure the Back Cover

1. Attach the Back Cover to the back of the camera and

rotate clockwise the two dots are aligneduntil solid

2. Slide the latch on the Back Cover the lock to

position.

To open the back cover, slide the latch on the back cover

out of the "lock" position. Rotate the cover

counterclockwise until the hollow dot is aligned with the

solid dot.

Notes:

1. Failure to properly seal your camera can result in leaks that could damage or destroy

your camera. Your warranty does not cover water damage resulting from user error.

2. Cover The rubber seal on the Back forms the waterproof barrier to protect the

camera in wet and underwater conditions. You must keep this seal clean as even a

single strand of hair or grain of sand can cause a leak.

3. After every use in salt water, you will need to rinse the outside of the product and the

seal with non salt water and dry- it thoroughly. Failure to properly clean the camera

could cause corrosion in the product or failure in the seal, in turn, which would

damage the product.

4.5 Power On & Power Oﬀ

To power the camera ON :

Press and hold the button. The camera will vibrate and the Green LED will turn on.

To power the camera : OFF

Press and hold the button. The camera will vibrate for about two seconds and the

Green LED will turn oﬀ.

4.6 Recording Videos

Before starting any recording, select the video resolution 1080p 1920 1080) or 720p ( x

(1280x720) by switching the Video Resolution Switch. There are two ways to start video

recording. When starting a video recording a short vibration indicate, s recording has

commenced. The LED indicator illuminates RED throughout the recording.

1. Whether the camera power is ON or OFF, simply slide the switch towards the

camera front to start recording. The red REC mark will be visible and the LED will

glow red.

2. If your camera is OFF and the switch is already at the REC location, press

and hold the button to turn the camera ON and start recording.

Slide the switch backward to stop recording. You will see the green STOP mark,

the camera will vibrate, and the LED indicator will GREEN. The camera will then change to

automatically enter Standby mode.

Alternatively, you can simply hold the button for several seconds, which will stop the

recording and turn the camera off. The camera will vibrate for about two seconds and the

Red LED light will turn off.

Notes:

1. You cannot change the video resolution while recording is in progress.

2. There will be seconds delay before about a 2-3 the camera starts recording.

3. Ens ure there is sufficient memory available on the MicroSD card. If the card is full,

the camera will vibrate five seconds and the Green LED will flash continuously. for

4.7 Taking Photos

1. Power the button. on the camera by pressing

2. After the camera power has been turned on, press the button to take a photo. A

short vibration and a flash of the Green LED indicate the action was successful. that

Notes:

1. The Still Photo function is disabled during video recording.

2. If the card is full, the camera will vibrate for five seconds and the Green LED will flash

continuously.

4.8 Auto Rotation

The camera has in gyroscopic a built- sensor, which is able to detect the camera's

orientation. If the camera is mounted upside down, for example, the recording is rotated so

that it plays back with the proper orientation. This allows to mount you the camera in

different orientation without recording a rotated or inverted view. s

Notes

1. Auto Rotation only applies to video recording. Still photos use a fixed orientation.

2. The camera orientation will not change while recording is in progress. Ensure the

orientation is set properly before starting a recording.

3. You can disable the auto rotation function using the software utility.

Produkt Specifikationer

Mærke:	Monoprice
Kategori:	Sportscam
Model:	MHD 10159

Har du brug for hjælp?

Hvis du har brug for hjælp til Monoprice MHD 10159 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Sportscam Monoprice Manualer

Monoprice MHD 10159 Manual

29 Juli 2024

Sportscam Manualer

Nyeste Sportscam Manualer

Mio MiVue M350 Manual

17 September 2024

GoXtreme Vision Duo Manual

5 September 2024

GoXtreme Rebel Manual

5 September 2024

GoXtreme Impulse 4K Manual

5 September 2024

GoXtreme Manta 4K Manual

5 September 2024

Drift Ghost X Manual

5 September 2024

Drift Ghost 4K+ Manual

5 September 2024

Drift KHCAMBEACTA Manual

5 September 2024

Akaso SEEMOR-200 Manual

5 September 2024

Axis W120 Manual

3 September 2024