Msonic MI8650KW Manual

Msonic Tastatur MI8650KW

Læs nedenfor 📖 manual på dansk for Msonic MI8650KW (2 sider) i kategorien Tastatur. Denne guide var nyttig for 6 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/2
1
2 3 4
5 7 7
ENG
ENGENG ENG
MI8650KW
6
PL ENG ENGENG
Items of Note Faceplate Control an External Connecon Port
Pre-Play Preparaon Basic Playing Methods
Please carefully review these items of note prior to use
Cauon：
Front-facing faceplate controls:
Use of AC power supply adapter
Side-facing faceplate control:
Please use dedicated power cables. If the power cable is damaged, please immediately
replace it.
Only specialists may dismantle the electronic keyboard. Do not make any changes to
internal parts. If abnormalies occur during usage, please immediately cease usage
and provide to professional repair personnel for repair.
When the electronic keyboard is connected to other devices, connecon must be
conducted with both devices powered off.
Do not play the electronic keyboard at maximum volume or at uncomfortable levels
for long periods of me
Please avoid heat sources, as excessive heat will result in damage to electronic
keyboard components.
Prevent materials such as liquids, dust, and small parcles from entering the electric
keyboard and causing corrosion or component short-circuits.
Prior to cleaning the electronic keyboard, please disconnect it from the power socket.
Do not plug-in or unplug the power socket with wet hands.
When cleaning the electronic keyboard, please wipe using a dry and so cloth. To
prevent damage to the keyboard surface, do not use paint, alcohol, or other chemical
solvents to wipe the keyboard body.
When finished playing, or when not in use for long periods, please turn off the power
and unplug from the socket.
When using an AC power supply adapter, the dedicated AC power adapter for the electric
keyboard should be used. When using it, plug one end of the power adapter into the back
of the keyboard faceplate power supply socket, and the other one into the municipal
power grid. (Please note that adapter input voltage must be the same as municipal power
voltage).
Baery installaon
Open the boom baery trough cover and install 6 1.5V D-size baeries (SUM-1, R20 or
equivalent). Please be absolutely sure of the baery indicaon of posive (+) and
negave (-) polarity direcon for installing the baeries, then replace the baery trough
cover.
Note: When baery power is insufficient and leads to abnormal condions such as the
electric keyboard being unable to produce normal sound or the display appearing faint,
a new set of baeries should be mely installed. Never mix new and old baeries or
different variees of baeries. When not using the keyboard for long periods, please
remove the baeries to prevent baery leakage damaging the electric keyboard.
Connecng an amplifier / speaker
This electric keyboard has an onboard loudspeaker system, and can also connect other
external amplifiers or loudspeakers for use. First turn off the power for the electronic
keyboard and external device, then plug in one end of the stereo audio cable into
another speaker device LINE IN (line input) or AUX IN (auxiliary input) socket. The other
end is plugged into the keyboard OUT L/R socket behind the faceplate.
Using headphones
Plug in headphones into the keyboard HEADPHONE (earphone) socket behind the
faceplate. Once this is done, the electronic keyboard’s loudspeaker will automacally
shut off. Using headphones can avoid influencing other people, and is suitable for
personal listening and nighme pracce.
Press the “Power Switch” buon. The screen displays “120”, which is the electronic
keyboard’s current tempo speed. The machine is now ready to use. Pressing this buon
again will turn off the power to the electronic keyboard.
Selecng mbre
This keyboard has 100 mbres for you to select from, ranging between “t00” and “t99”.
(1) When powering on, the mbre preset is “t00” piano mbre. Press number keys to
select the required mbre.
(2) It is also possible to press the [+] or [-] keys to select your required mbre. If the
number key is mbre control, it is necessary to press the [mbre] key before selecng
the mbre.
Adjusng the main volume
This electronic keyboard has 16 levels of volume for you to select from “00” to “15”. Main
volume preset is “10”. Press the [main volume+] or [main volume -] keys to reduce or
increase the main volume level. Pressing both buons simultaneously returns volume to
the preset level. The main volume buon also controls accompaniment volume.
Accompaniment demo tracks
This keyboard has 12 demo tracks. When playing a demo track, the screen displays the
corresponding code for the demo track.
(1) Pressing the [demo connuous play] key makes the system successively play all
stored demo tracks. Pressing [demo track selecon] buon, the system will repeatedly
play the current demo track.
(2) When in [demo connuous play] or [demo track selecon] mode, to switch to
another demo track you can press the [demo connuous play] or [demo track selecon]
keys to make the keyboard stop, then press the key again to play the next demo track.
During the play process, pressing [demo connuous play] / [demo track selecon] /
[learning] [single key] keys, play will stop and the keyboard will return exit demo track
play mode.
Playing percussion music
Pressing the [keyboard key] key will make the screen display “PEr”, making the keyboard
temporarily turn into a percussion keyboard. Each key on the keyboard corresponds to a
different percussion instrument. Pressing the [keyboard key] key cancels keyboard
percussion music, changing the keyboard back into a normal keyboard.
Tempo selecon
This keyboard has 100 different tempos for you to select from ranging between “r00”
and “r99”. When powering on, the tempo preset code is “r00”. The screen displays the
current tempo code, and tempo can be selected based on tempo code by pressing the
number key or +/- keys. (Similar to mbre selecon)
Tempo control
(1) Start tempo
There are three methods to star tempo:
Pressing the [start/stop] key can begin tempo accompaniment.
Pressing the [synchronizaon] key shows the first beat flashing on the screen, and pressing
any one of the 19 keys on the le keyboard will have the tempo accompaniment and play
begin simultaneously.
Pressing the [prelude / coda] key will have the electronic keyboard play a prelude, then
enter an automac accompaniment tempo.
(2) Interlude
When entering the tempo accompaniment, press the [insert] key to have the electronic
keyboard automacally insert an interlude and then connue again to play the tempo
accompaniment.
(3) Stop tempo
Press the [start/stop] key to immediately end tempo accompaniment.
Press the [prelude/coda] key for the electronic keyboard to automacally play a code
accompaniment and then finish automac accompaniment.
Automac metronome
The system’s metronome has a total of eight different beat sengs, namely 1/8 beat,
2/8 beat….to 8/8 beat. Under normal condions, press the [metronome] key to begin a
ck-tock metronome sound. Pressing this key once will play a 1/8 beat, and pressing it
again will end the beat. Starng the [metronome] key again will play a 2/8 beat, and
stopping it again and then beginning once more will be a 3/8 beat, then 4/8…to 8/8 beat
in a cycle. When an automac accompaniment is started, the metronome feature
automacally exits.
Speed adjustment
The beat speed preset is 120 beats/minute, and can be adjusted to 46 different sengs
from 60 beats/minute to 240 beats/minute. Pressing the [speed+] or [speed -] keys will
accelerate or decelerate tempo speed. Pressing both the [speed+] and [speed -] keys
simultaneously will return speed to the preset level.
Accompaniment volume adjustment
When powering on, the accompaniment volume preset is “A13”, and this can be adjusted
from “A00” to “A15”. Pressing [accompaniment volume +] / [accompaniment volume -] can
increase or decrease accompaniment volume. The accompaniment volume is also
controlled by the main volume.
Press the [single finger] key and the screen will display [C-1] and single finger automac
bass chords are iniated. At this point, the 19 keys on the le side of the keyboard are
turned into a “single finger automac bass chord keyboard”. Playing based on single
finger chord fingering allows for playing of single finger automac bass chords. Pressing
the [chord off] key will make the screen display “OFF” and turns off single finger chord
accompaniment, and chord keyboard is returned back to a normal keyboard.
Single Finger Chord Fingering Tables
Mulple Players Chord Fingering Tables (C Note)
Mulple finger chords
Press the [mulple finger] key and the screen will display [C-2] and mulple finger
automac bass chords are iniated. At this point, the 19 keys on the le side of the
keyboard are turned into a “mulple finger automac bass chord keyboard”. Playing
based on mulple finger chord fingering allows for playing of mulple finger
automac bass chords. Pressing the [chord off] key will make the screen display “OFF”
and turns off mulple finger chord accompaniment, and chord keyboard is returned
back to a normal keyboard.
C note mulple finger chord fingering table is as follows (other tones for mulple
finger chord tables follow the same paern):
Manual control bass
Press the [manual control base] key and the screen will display [C-3] and manual control
bass funconality is iniated. The 19 keys on the le side of the keyboard are turned into
a bass keyboard, retaining their original mbre. At this point, mbre can be selected for
the right side keyboard. Pressing the [chord off] key can turn off the manual control bass
feature, and bass keyboard funconality is cancelled and the keyboard mbre will be the
most recently selected mbre. When automac bass chords are iniated, manual control
bass is cancelled, and the bass keyboard turns into a chord keyboard.
Transposion
Pressing the [transposion+] / [transposion -] keys can make the keyboard conduct
transposion, and the screen will display the current transposion value. Value available
for adjustment are from “-12” to “12”. Simultaneously pressing the [transposion+] and
[transposion -] keys will return the level to preset level of “00”, and the keyboard
returns to a normal standard keyboard.
Tenuto feature
Pressing the [tenuto] key will make the screen display ‘S-1”. At this point, the broadcast
notes when playing the keyboard will generate a sustained sound effect. Pressing the
[tenuto] key again will make the screen display “S-0” and the sustained sound effect is
cancelled and the keyboard returns to a normal standard keyboard.
Trill feature
Pressing the [trill] ley will make the screen display “on”. At this point, the broadcast
notes when playing the keyboard will generate a trill sound effect. Pressing the [trill]
key again will make the screen display “OFF” and the trill sound effect is cancelled and
the keyboard returns to a normal standard keyboard.
Pressing the [record] key will make the screen display “REC”. At the same me, the
electronic metronome is iniated, issuing a tempo “ck-tock” sound. If the metronome
beat is not required, press the [metronome] key to turn the electronic beat off. The
player can freely perform according to their own needs, and the notes broadcast by the
electronic keyboard will be saved. Press the [record] key again and the screen will
display “ICH”, meaning the record funcon has been halted. Then press the [playback]
key and the screen will display “PLY”, allowing playback of the recorded notes. Aer
playing, if you would like to hear it again, press the [playback] key again. During play,
press [playback] to stop playback.
This electronic keyboard has “Single Finger Automac Bass Chords”, “Mulple Finger
Automac Bass Chords”, and “Manual Control Bass” play systems.
Automac Tempo
Automac Bass Chords
Effect Controls
Recording and Playback Features
Contents
1
2
3
4
5
7
7
8
8
Speaker
Power switch
Main volume
Accompaniment volume
Speed
Transposion
Single finger
Tenuto
Trill
Record
Playback
Programming
Play
Digital display screen
Keyboard keys
Demo track selecon
Demo track connuous play
Single key
Learning
Digital control keys
Tempo
Timbre
Metronome
Chord close
Manual bass
Mulple fingers
Faceplate percussion music
Prelude / Coda
Insert
Synchronize
Start / Stop
Automac chord keyboard
DC 12V: DC 12V power input socket
Headphone: headphone socket
Out L/R: speaker le-right sound channel output socket
Mic: microphone socket
Faceplate Control and External Connecon Port
Pre-Play Preparaon
Basic Playing Methods
Automac Tempo
Automac Bass Chords
Effect Controls
Recording and Playback Features
Programming
Smart Learning Features
Musical Keyboard
Organy muzyczne
Single finger chords
展开尺寸： 双面单黑印刷　红色是刀线，不用印刷263x372mm
1-8
10-16
Instruction Manual
Instrukcja obsługi

Produkt Specifikationer

Mærke: Msonic
Kategori: Tastatur
Model: MI8650KW

Har du brug for hjælp?

Hvis du har brug for hjælp til Msonic MI8650KW stil et spørgsmål nedenfor, og andre brugere vil svare dig


Tastatur Msonic Manualer

Msonic

Msonic MI8650KW Manual

30 Juli 2024

Tastatur Manualer

Nyeste Tastatur Manualer

BlueBuilt

BlueBuilt BBWLUKQ23 Manual

20 November 2024
Krom

Krom Kluster Manual

19 November 2024
Evolveo

Evolveo WK32BG Manual

18 November 2024
Behringer

Behringer SPICE Manual

10 November 2024
Hamlet

Hamlet XKKU200-IT Manual

10 November 2024
Behringer

Behringer SURGES Manual

10 November 2024
Hamlet

Hamlet XKKMICEU200 Manual

9 November 2024
Behringer

Behringer JT-4000M MICRO Manual

8 November 2024
Native Instruments

Native Instruments Kontrol S-Series MK3 Manual

2 November 2024
Evolveo

Evolveo K1050 Manual

22 Oktober 2024