Multimetrix DMM141 Manual
Multimetrix
Multimeter
DMM141
Læs nedenfor 📖 manual på dansk for Multimetrix DMM141 (3 sider) i kategorien Multimeter. Denne guide var nyttig for 17 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/3
You have just purchased a DMM141 digital multimeter
and p1-we thank you for your confidence.
For best results from your instrument:
read these operating instructions carefully,
comply with the precautions for use.
WARNING, risk of DANGER! The operator
must refer to this user’s manual whenever
this danger symbol appears.
Equipment protected by double insulation.
Earth.
Instruction that must be read and understood.
AC - Alternating current.
DC - Direct current.
Battery.
The CE marking indicates conformity with
European directives.
The rubbish bin with a line through it means
that in the European Union, the product
must undergo selective disposal for the
recycling of electric and electronic material,
in compliance with Directive WEEE 2002/96/
EC. This equipment must not be treated as
household waste.
PRECAUTIONS FOR USE
This instrument and accessories are compliant with
safety standards IEC 61010-1, IEC 61010-031 and
IEC 61010-2-033 for voltages up to 600V in category III.
Failure to observe the precautions for use and safety
instructions may cause an electric shock, fire, explosion,
or destruction of the instrument and of the installations.
The operator and/or the responsible authority must
carefully read and clearly understand the various
precautions to be taken in use.
If you use this instrument other than as specified, the
protection it provides may be compromised, thereby
endangering you.
Do not use the instrument on networks of which the
voltage or category exceeds those mentioned.
Observe the environmental conditions of use.
Do not exceed the rated maximum voltages and
currents between terminals or with respect to earth.
Do not use the instrument if it seems to be damaged,
incomplete, or poorly closed.
Before each use, check the condition of the insulation
on the leads, housing, and accessories. Any item of
which the insulation is deteriorated (even partially) must
be set aside for repair or scrapping.
Use only the leads and accessories supplied. Using
leads (or accessories) of a lower voltage or category
reduces the voltage or category of the combined
instrument + leads (or accessories) to that of the leads
(or accessories).
Use personal protective equipment when conditions
require.
When handling the leads, test probes, and crocodile
clips, keep your fingers behind the physical guard.
Keep your hands away from the terminals of the
instrument.
Replace the battery as soon as the symbol appears
on the display unit. Disconnect all leads before opening
the battery compartment cover.
PRESENTATION
The DMM141 is a device for measuring electrical
quantities:
AC or DC voltage measurement;
DC and AC current measurement;
Frequency measurement;
Capacitance measurement;
Resistance measurement, continuity measurement
with buzzer or diode test.
LCD display
unit
Keys
Input
terminals
Switch
Impact-resistant
jacket
Battery
compartment
cover
Definition of measurement categories
Me as u r em e n t cat egor y IV cor res pon d s t o
measurements taken at the source of low-voltage
installations.
Me as ur em en t ca t egor y III cor respon d s to
measurements on building installations.
M ea s u r em e n t c at eg or y II c or respon ds t o
measurements taken on circuits directly connected
to low-voltage installations.
USE
INSERTING THE BATTERIES
See § Maintenance.
TEST OF OPERATION
SELECT
CHANGING RANGES
OFF
OFF
Hz
%
HOLD OF THE DISPLAY
Hz %
Hz %
HZ AND % FUNCTIONS
For AC voltage and current measurements, they are used
to display the frequency and the duty cycle of the signal
measured, respectively.
REL FUNCTIOND
The REL key is used to subtract the value displayed D
at the time the key is pressed from all subsequent
measurements values and to display the result of the
subtraction. This function is not available when “OL” is
displayed.
The automatic power down function of the device is
reactivated when the device is switched back on.
CHANGING MODES
Several modes may be available for a given function
(existence of additional modes indicated by a yellow
symbol). Press the SELECT key to change which mode
is active.
+
SELECT
OFF
OFF
Hz
Diode test
Ω
OFF
OFF
Hz
%
Continuity test
OFF
OFF
Hz
%
+
Ω
R < 90 Ω =
+
Measurement of the frequency of the signal ( )
OFF
OFF
Hz
Measurement of the duty cycle ( )
RANGESELECT HOLD
OFF
OFF
REL
Hz %
Hz
%
RANGESELECT HOLD
OFF
OFF
REL
Hz %
Hz
%
30 min
Hz
+
RANGESELECT HOLD
MULTIMETER
10A
OFF
OFF
TRMS
REL
Hz %
Hz
%
DMM 141
Prop
Hz %
%
Battery
compartment
cover screws
REL
Resistance measurement
BACK-LIGHTING
De-activating the automatic power down
MEASUREMENTS
The input voltage must not exceed 600V.
DC voltage measurement
Capacitance measurement
SWITCHING OFF THE MULTIMETER
Manual switching off
Set the switch to OFF.
Automatic power down
OFF
OFF
Hz
%
AC voltage measurement
+
+
Resistance and capacitance measurements and
diode and continuity tests must be performed
on voltage-free circuits.
DMM141
True RMS Multimeter
RANGESELECT HOLD
MULTIMETER
10A
OFF
OFF
TRMS
REL
Hz %
Hz
%
DMM 141
SELECT
RANGE
REL
HOLD
OFF
OFF
Hz
%
OFF
OFF
Hz
SELECT
SELECT
SELECT
+
SELECT
Ω
SELECT
+
SELECT
GB
OFF
OFF
Hz
%
>2s
AUTO RANGE
AUTO RANGE
RANGE
RANGE
RANGE
HOLD
Hz %
80 sec.
RANGESELECT HOLD
REL
Hz %
RANGESELECT HOLDREL
Hz %
RANGESELECT HOLD
REL
Hz %
RANGESELECT HOLDREL
Hz %
RANGESELECT HOLDREL
Hz %
RANGESELECT HOLD
REL
Hz %
RANGESELECT HOLD
REL
Hz %
Hz
%
OFF
OFF
Hz
%
Hz
%
OFF
OFF
Hz
%
Hz %
RANGESELECT HOLD
REL
Hz %
Produkt Specifikationer
| Mærke: | Multimetrix |
| Kategori: | Multimeter |
| Model: | DMM141 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Multimetrix DMM141 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Multimeter Multimetrix Manualer
28 August 2024
25 August 2024
1 August 2024
25 Juli 2024
27 Januar 2024
23 December 2023
11 Maj 2023
26 November 2022
Multimeter Manualer
- Multimeter Bosch
- Multimeter Hager
- Multimeter Owon
- Multimeter Extech
- Multimeter Silverline
- Multimeter Emos
- Multimeter Metrix
- Multimeter TFA
- Multimeter Pyle
- Multimeter Biltema
- Multimeter Abus
- Multimeter Keithley
- Multimeter Hama
- Multimeter Milwaukee
- Multimeter BENNING
- Multimeter Clas Ohlson
- Multimeter Metrel
- Multimeter Kyoritsu
- Multimeter Laserliner
- Multimeter Parkside
- Multimeter FERM
- Multimeter Stanley
- Multimeter Elro
- Multimeter REV
- Multimeter Elworks
- Multimeter Powerfix
- Multimeter Digitus
- Multimeter Alecto
- Multimeter Schneider
- Multimeter Basetech
- Multimeter Voltcraft
- Multimeter Testboy
- Multimeter Greenlee
- Multimeter Velleman
- Multimeter Somogyi
- Multimeter FLIR
- Multimeter Perel
- Multimeter JUNG
- Multimeter APPA
- Multimeter Amprobe
- Multimeter Fluke
- Multimeter Monacor
- Multimeter Brennenstuhl
- Multimeter Projecta
- Multimeter Maxwell
- Multimeter Testo
- Multimeter GW Instek
- Multimeter Brandson
- Multimeter Ideal
- Multimeter Mastech
- Multimeter Högert
- Multimeter Brüder Mannesmann
- Multimeter Vimar
- Multimeter Klein Tools
- Multimeter PeakTech
- Multimeter Rigol
- Multimeter Uni-T
- Multimeter Joy-It
- Multimeter Wiha
- Multimeter HT Instruments
- Multimeter Chauvin Arnoux
- Multimeter Megger
- Multimeter Qian
- Multimeter Aim TTi
- Multimeter Steren
- Multimeter Gossen Metrawatt
- Multimeter Yato
- Multimeter Beha-Amprobe
- Multimeter Bearware
- Multimeter Sonel
- Multimeter Profile
- Multimeter Aldi
- Multimeter Amiko
- Multimeter Workzone
- Multimeter Tacklife
- Multimeter Etekcity
- Multimeter Digi-tool
- Multimeter Skandia
- Multimeter Elma
- Multimeter Hubinont
- Multimeter Kewtech
- Multimeter Strex
- Multimeter MBS
- Multimeter MGL Avionics
- Multimeter PCE Instruments
- Multimeter Micronta
- Multimeter CEM
- Multimeter Horex
- Multimeter Cosinus
- Multimeter Kurth Electronic
- Multimeter Weltron
- Multimeter Sanwa
- Multimeter Rohde & Schwarz
- Multimeter EEVBlog
- Multimeter Kingcraft
- Multimeter Weidmüller
- Multimeter Caltek
- Multimeter Noyafa
Nyeste Multimeter Manualer
16 November 2024
16 November 2024
15 November 2024
17 Oktober 2024
17 Oktober 2024
17 Oktober 2024
17 Oktober 2024
16 Oktober 2024
9 Oktober 2024
6 Oktober 2024