Muse M57BT Manual

Muse CD-afspiller M57BT

Læs nedenfor 📖 manual på dansk for Muse M57BT (1 sider) i kategorien CD-afspiller. Denne guide var nyttig for 34 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/1

This micro system supports Bluetooth audio function. You can play the audio le in your mobile phone

via the micro system.

1. Press SOURCE button to select Bluetooth mode. “ ” is displayed. Press button for 4

seconds and release the button.

2. Turn on the Bluetooth function of your mobile phone. Select the item of searching the Bluetooth

device and enter it. Your mobile phone starts to search for Bluetooth devices within range (10

meters). Select this micro system “M-55BT” and conrm it, then you are asked to input a 4-digit

password that is 0000. Enter the password and conrm it.( If you have made Bluetooth connectivity

before, a list of the previous search results is displayed. Select “M-55BT” and conrm.) “ ”

appears when pairing is successful.

3. When pairing is successful, you can control music player of your phone by pressing , , VOL+/-

, , button on the unit. MUTE

4. Turn off the Bluetooth function of your mobile phone to do disconnection.

M-55 BT

User Manual

MICRO SYSTEM CD/MP3 WITH BLUETOOTH

Please read the instruction carefully before operating the unit.

English

GB - 5

Intro playback

Press INTRO button on remote control and “INTRO” appears on display. It will start to play the rst

10 seconds of each track. Press button again to cancel this function and “INTRO” disappears INTRO

on display.

Repeat playback

Press REPEAT button on remote control repeatedly to select a play mode:

- Repeat One : display shows “REP”.

- Repeat folder :display shows “REP ALB”. (MP3 only)

- Repeat All : display shows “REP ALL”.

To cancel repeat playback, press button repeatedly until repeat indicator disappears.REPEAT

Random playback

Press RANDOM button on remote control and “RND” appears on display. It will play all tracks in

random order. Press RANDOM button again to cancel this function and “RND” disappears.

Program playback

1. In stop mode, press button on remote control. The display will show “00 P01” (“000 P01” PROG

for MP3 ).

2. Use number buttons to input the track number and press button to conform. PROG

3. Repeat above steps to program up to 20 tracks for CD and 99 tracks for MP3.

4. Press to start program playback.

5. Press once to stop the program playback. Press twice to cancel STOP on remote control STOP

this function.

GB - 1

1. LED display

2. STANDBY indicator

3. Remote sensor

4. button STANDBY

5. PLAY/PAUSE button

6. SOURCE button

7. , buttons:

Skip / search / Tuning

8. VOL+/- buttons

9. Earphone jack

10. USB port

11. Disc door open button

12. Disc compartment

13. FM antenna

14 AC cord.

15. Speaker terminals

16. Speaker box

17. Speaker wire

GB - 2

R1. button STANDBY

R2. button MUTE

R3. number buttons0-9,10+

R4. button : To program playback sequences.PROG

R5. buttons : Folder down /upALB-/+

R6. buttonsVOL-/+

R7. / / button: M- (MEMORY -)

Skip / search / Preset down

R8. / / button: M+ (MEMORY +)

Skip / search / Preset up

R9. PLAY/PAUSE button

R10. buttons: TuningTUN-/+

R11. buttonCD

R12. buttonUSB

R13. buttonFM

R14. button SOURCE

R15. buttonINTRO

R16. buttonREPEAT

R17. button RANDOM

R18. buttonAUTO/ STOP

R19. buttonSLEEP

R20. buttonEQ

R21. buttonMEMORY

R22. buttonST/MONO

Before throwing any batteries away, consult your distributor who may be able to take them

back for specic recycling.

REMOTE CONTROL

Installing Battery

Insert 2 “AAA/ UM4” batteries to the remote control prior to use. Make sure to match their polarities

(+/-) to the markings inside the compartment.

NOTES:

- Never recharge the batteries, apply heat to them or take them apart.

- If the remote control is not going to be used for a long time, remove the battery to avoid damage

caused by battery leakage corrosion.

- Attention should be drawn to the environmental aspects of battery disposal.

- Do not throw batteries in re!

- Battery shall not be exposed to excessive heat such as sunshine, re or the like.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or

equivalent type.

1. Press STANDBY button to turn on the unit.

2. Open the CD door by pushing the CD door Open button .

3. Place the CD with label side up inside the CD compartment and close the CD door.

4. Press button to select CD function. After a few seconds, the total number of track SOURCE CD or

and total play time will appear on display. The “CD” icon is displayed. Playback starts automatically.

GB - 3

1. Press STANDBY button to turn on the unit.

2. The function (CD / USB / FM / BLUETOOH) is selected by pressing button repeatedly, or SOURCE

pressing , button on remote control respectively. CD USB FM or

VOLUME

Press VOL-/+ to adjust the sound to comfortable level. The volume level will be displayed for a few

seconds.

MUTE

To cut off the sound from the speakers temporarily, press button on remote control. The “MUTE” MUTE

icon is shown on the display. Press button again to cancel Mute mode and restore the sound MUTE

from the speakers.

Press EQ button on remote control to toggle among the different sound effects (FLAT / JAZZ/

CLASSIC / ROCK / POP). The selection will show on display for few seconds.

This set operates on AC 100-240V~ 50/60Hz.

Connect the power cord to a convenient AC wall outlet.

1. Insert the speaker cables by pushing down the terminal lever of the Left Speaker Terminal and the

Right Speaker Terminal.

2. Connect the speaker to Speaker Terminals, with BLACK wire to BLACK terminals and WHITE/

BLACK wire to WHITE terminals.

Example 2, to select the 25

th track:

Method 1: Press button twice, “02-“ blinks on display, then press button when “02-“ is blinking. 10+ 5

After that, “025” will blink on display for 2 seconds and playback starts automatically.

Method 2: Press 2 5 and then . “025” will blink on display for 2 seconds and playback starts

automatically.

GB - 4

1. Press STANDBY button to turn on the unit.

2. Connect an USB device to the USB port on unit.

3. Press SOURCE or USB button to select USB mode. After a few seconds, the total number of folder

and track will appear on display. Playback starts automatically.

Notes:

- Do not put anything other than a USB device to the port of this unit. Other objects may damage the

USB mechanism.

- The USB socket must not be connected to the computer directly, for that may damage the unit.

- There are many USB devices in the market. We cannot guarantee to support all different models

Please try another USB device if your device is not supported.

Fast search backward/forward

Press and hold / to search quickly within a track.

Select a folder (mp3 only)

• Press on remote control to select the rst track of next folder of your current disc or USB. ALB+

• Press ALB- on remote control to select the rst track of previous folder of your current disc or USB.

Listening to the radio

1. Press STANDBY button to turn on the unit.

2. Press SOURCE or FM button to select FM Radio mode. “FM” appears on display.

3. Tune to a desired station with / on unit or TUN-/+ on remote control.

Note:

- For a better reception in FM, extend the antenna.

- If a stereo broadcast is received, “ST” is displayed. Press button on remote control to ST/MONO

switch between Mono and Stereo mode.

Presetting radio stations

The unit can store up to 30 FM stations in its memory.

Manual preset

1. Tune to a desired station.

2. Press MEMORY button on remote control. “P01” ashes on display.

3. Press M-/+ on remote control to select a desired preset location. Press MEMORY again to save the

radio station as the selected preset station.

4. Repeat above steps to preset a maximum of 30 stations.

Auto preset

In mode, press on remote control to start automatic preset programming. FM AUTO

Radio frequencies will be browsed and radio stations stored automatically. When all the available radio

stations are stored or all memory locations are full, the auto preset programming function will stop.

Retrieving the preset stations

In radio mode, press M-/+ on remote control to access a preset station.

In sleep mode, the unit will turn off automatically after a specied time.

You can select duration in minutes before the unit turns off automatically.

1. Press SLEEP button on remote control repeatedly to select 90-80-70-60-50-40-30-20-10- 00.

Release button. “SL” icon remains on display. SLEEP

Notes:

- Sleep time can only be set when the unit is turned ON.

- The sleep function is cancelled when “00” is selected, and “SL” icon disappears.

2. If you want to switch off the radio before sleep ends, press button. STANDBY

GB -6

Power supply: AC 100-240V~ 50/60Hz

Power consumption: 20W

Speaker: 8 ohms

Cleaning

WARNING: Disconnect the unit from the mains supply before cleaning.

- Use a soft, dry, clean cloth. Regularly dust the vents at the back or sides.

- Using solvents, abrasive or alcohol-based products risks damaging the appliance.

- If an object or liquid enters inside the appliance, unplug it immediately and have it checked by an

authorized engineer.

Notes on disc

* Do not use irregular shape CDs (example: heart-shaped, octagonal ones). It may result in

malfunctions.

* Do not place more than one disc in the disc compartment.

* Do not try to open the disc compartment during playing.

* Do not touch the lens. Doing so may cause malfunction.

* If there is a scratch, dirt or ngerprints on the disc, it may cause tracking error. Before playing, clean

the disc with a cleaning cloth. Wipe the disc from the center out. Don't store discs in places with high

temperatures or high humidity, they can become warped. After playing, store the disc in its case.

Important Note

• Before transporting the unit, remove the disc from the disc compartment.

CAUTION: To reduce the risk of electric shock, do not remove the cover (or

back). There are no user serviceable parts inside the unit. Refer all servicing to

qualify personnel.

The lightening ash with arrowhead symbol within the triangle is a warning sign alerting the

user of “ dangerous voltage” inside the unit.

The exclamation point within the triangle is a warning sign alerting the user of important

instructions accompanying the product.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO

RAIN OR MOISTURE.

GB -7

IMPORTANT!

- The ventilation should not be impeded by covering the ventilation openings with items such as

newspapers, table-cloths, curtains, etc.

- No naked ame sources, such as lighted candles, should be placed on the apparatus.

- The use of apparatus in moderate climates.

- The apparatus should not be exposed to dripping or splashing.

- Ensure a minimum distance of 5cm around the apparatus for sufcient ventilation.

- Do not place objects lled with liquids, such as vases, on the apparatus.

- The marking plate is located on the back of unit.

- Mains plug is used as the disconnect device and it shall remain readily operable. To be completely

disconnected the power input, the mains plug of the apparatus shall be disconnected from the mains

completely. The mains plug should not be obstructed or should be easily accessed during intended

use.

- Under the inuence of electrical fast transient or/and electrostatic phenomenon, the product may

malfunction and require user to power reset.

- Excessive sound pressure from earphones and headphones can cause hearing loss.

CAUTION: Invisible laser radiation when open and interlocks defeated. Avoid exposure to beam.

Class 1 laser product.

If at any time in the future you should need to dispose of this product please note that

Waste electrical products should not be disposed of with household waste. Please recycle

where facilities exist. Check with your Local Authority or retailer for recycling advice.(Waste

Electrical and Electronic Equipment Directive).

Note: Design and specication are subject to change without notice.

Inserting the plug of your headphones into the headphone jack will enable you to listen in private. When

using headphones, the speaker will be disconnected.

NOTE: READ THIS IMPORTANT INFORMATION BEFORE USING YOUR HEADPHONES.

1. Avoid extended play at very high volume as it may impair your hearing.

2. If you experience ringing in your ears, reduce the volume or shut off your unit.

3. Keep the volume at a reasonable level even if your headset is an open-air type designed to allow you

to hear outside sounds. Please note that excessively high volume may still block outside sounds.

16 16

15 14

109

Pu sh S pe ak er terminal tab

down to insert wire.

Release tab to lock wire in the

terminal.

BASIC OPERATION

Play/pause

Press to pause playback. Press again to resume.

Select a track

- By /

Press / to select a track.

- By number buttons , 10+ 0-9

Use the number buttons to input the track number, and it will start playback from the selected track

automatically.

If you want to input the track number bigger than 9, use the , button. 10+ 0-9

Example 1, to select the 10

th track:

Method 1: Press 10+ button once, “01-“ will blink on display for 2 seconds and playback starts

automatically.

Method 2: Press 1 0 and then . “010” will blink on display for 2 seconds and playback starts

automatically.

12 3

4 5

10+

PROG

STANDBY MUTE

ALB-

ALB+

VOL+

TUN- TUN+

VOL-

INTRO REPEAT

RANDOM

AUTO / STOP

CD USB

SO RCEU

SLEEP EQ MEMO ST/MONORY

R11

R15

R16

R19

R12

R10

R13

R18

R17

R14

R22

R21

R20

R10

LOCATION OF CONTROLS

SPEAKER CONNECTION

SLEEP FUNCTION

MAINTENANCE

SPECIFICATION

MORE INFORMATION

POWER SUPPLY

AUDIO CONTROLS

DISC OPERATION

RADIO

USING HEADPHONES (NOT INCLUDED)

BLUETOOTH FUNCTION

PLAY MODES(CD/MP3 ONLY)

USB OPERATION

To prevent possible hearing damage, do not listen at high volume levels for long

periods.

Maximum output voltage ≤ 150mV

NEW ONE S.A.S

10, Rue de la Mission, 25480 Ecole Valentin, France

Hereby, NEW ONE S.A.S, declares that this MUSE M-55 BT is in compliance with the essential

requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity

may be consulted at

http://www.muse-europe.com/conformity/M-55BT.pdf

HX-3187T IB MUSE 001 REV3 -GB.indd 1 2014/5/29 10:14:54

Produkt Specifikationer

Mærke:	Muse
Kategori:	CD-afspiller
Model:	M57BT
Bredde:	- mm
Dybde:	- mm
Højde:	- mm
Produktfarve:	Sort
Indbyggede højttaler(e):	Ja
Udgangseffekt (RMS):	10 W
Udgange til hovedtelefoner:	1
Skærm:	LCD
Indgangsspænding for vekselstrømsadapter:	100 - 240 V
Frekvens for vekselstrømsadapter:	50/60 Hz
Fjernbetjening inkluderet:	Ja
Strømkilde type:	Vekselstrøm
AC-adapter inkluderet:	Ja
Understøttede disktyper:	CD
Baggrundsfarve:	Ravfarvet
Antal indbyggede højttalere:	2
Baggrundsbelysning:	Ja
AUX-indgang:	Ja
Understøttede radiobånd:	FM
MP3-afspilning:	Ja
CD-R-afspilning:	Ja
Tilslutning af hovedtelefoner:	3,5 mm
Integreret antenne:	Ja
Højttalere:	2
Antal forudindstillede stationer:	30
Kassettebåndoptager:	Ingen
Antal optiske diske:	1 diske
Digital tuner:	Ja
CD-skifter:	Ingen