Musical Fidelity V90-DAC Manual


Læs nedenfor 📖 manual på dansk for Musical Fidelity V90-DAC (2 sider) i kategorien Receiver. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
V90-DAC 32 Bit Digital
V90-DAC 32 Bit Digital
V90-DAC 32 Bit Digital
V90-DAC 32 Bit DigitalV90-DAC 32 Bit Digital To
To
To
To To Analog Converter with 24-
Analog Converter with 24-
Analog Converter with 24-
Analog Converter with 24-Analog Converter with 24-
bit/96kHz Asynchronous USB
bit/96kHz Asynchronous USB
bit/96kHz Asynchronous USB
bit/96kHz Asynchronous USBbit/96kHz Asynchronous USB
Instructi
Instructi
Instructi
InstructiInstructions
ons
ons
ons ons
Introduction
Introduction
Introduction
IntroductionIntroduction
Thank you for purchasing the V90-DAC
digital to analog converter. We sincerely
hope that it will bring you many years of
outstanding listening pleasure.
Installation Precautions
Installation Precautions
Installation Precautions
Installation PrecautionsInstallation Precautions
Your new V90-DAC is designed and built to
provide trouble-free performance, but as with
all electronic devices, it is necessary to
observe a few precautions:
Do not use the V90-DAC near water. The
unit must not be exposed to dripping or
splashing and no objects filled with liquids,
such as vases, must be placed on the unit.
Keep the V90-DAC away from heat such as
radiators. No naked flame sources, such as
lighted candles, should be placed on the
unit.
Power Supply Note:
Power Supply Note:
Power Supply Note:
Power Supply Note:Power Supply Note:
Only use approved
Musical Fidelity
DC
power supply. The use of other adaptors or
supplies could seriously damage the V90-
DAC.
This Hi-fi product has been tested to ensure
that its operation is not adversely affected by
normal background levels of Radio
Frequency Interference (R.F.I.), and that it
does not itself generate excessive amounts
of interference. However, if a problem
persists, please contact your Musical Fidelity
agent.
Never open the case of the V90-DAC
yourself, as this will invalidate the guarantee.
Place all connecting cables where they are
not likely to be walked on or trapped by
items placed on them.
The V90-DAC will operate in accordance
with its specifications within the following
environmental range:
Temperature 5 to 45 degrees Celsius
Humidity 10 to 90% non condensing
There are no user adjustments inside.
Please refer all service work to an
authorised Musical Fidelity agent.
Power LED Pow
Power LED Pow
Power LED Pow
Power LED PowPower LED Power switch
er switch
er switch
er switch er switch
Inpu
Inpu
Inpu
Inpu Input selector s
t selector s
t selector s
t selector st selector switch Di
witch Di
witch Di
witch Diwitch Digital signal lock
gital signal lock
gital signal lock
gital signal lockgital signal lock LED
LED
LED
LED LED
RCA outputs L
RCA outputs L
RCA outputs L
RCA outputs LRCA outputs Left and Right U
eft and Right U
eft and Right U
eft and Right Ueft and Right USB type “B” i
SB type “B” i
SB type “B” i
SB type “B” iSB type “B” input socket COAX
nput socket COAX
nput socket COAX
nput socket COAX nput socket COAX SPDIF input OP
SPDIF input OP
SPDIF input OP
SPDIF input OPSPDIF input OPTICAL input 1 O
TICAL input 1 O
TICAL input 1 O
TICAL input 1 OTICAL input 1 OPTICAL input
PTICAL input
PTICAL input
PTICAL input PTICAL input 2 12
2 12
2 12
2 122 12V DC power socket
V DC power socket
V DC power socket
V DC power socket V DC power socket
Connecti
Connecti
Connecti
ConnectiConnections
ons
ons
onsons
All connections must be made before the mains adaptor is plugged in,
and before any amplifier connected is switched on. Always switch off
the equipment attached to the V90-DAC before
connecting/disconnecting power, changing leads or inputs.
Digita
Digita
Digita
DigitaDigital coaxia
l coaxia
l coaxia
l coaxial coaxial input
l input
l input
l inputl inputs
s
s
s s
Using good quality digital RCA (SPDIF) leads (not supplied), connect
the digital coaxial output from a digital audio source (e.g. CD player) to
the V90-DAC COAXIAL
COAXIAL
COAXIAL
COAXIALCOAXIAL
socket.
Digital optical
Digital optical
Digital optical
Digital opticalDigital optical inputs
inputs
inputs
inputs inputs
Using good quality optical (TOSLINK) leads (not supplied), connect the
digital optical output from a digital audio source (e.g. CD player) to the
V90-DAC OPTICAL 2
OPTICAL 2
OPTICAL 2
OPTICAL 2 OPTICAL 2 socket (or 1
1
1
11 if COAXIAL
COAXIAL
COAXIAL
COAXIALCOAXIAL input is not already
used).
Note the COAXIAL and OPTICAL 1 inputs are a
shared
input. The unit
will only respond to the first of these inputs to present a valid digital
stream if both are used.
USB input
USB input
USB input
USB inputUSB input
A quality USB A-B cable is required to connect the unit to a computer.
Plug the B (square) end into the socket in the back of the V90-DAC and
the A (rectangle) end into a free USB socket on your computer. Set the
input select switch to “USB”.
Once the unit is plugged in and powered, the computer should detect
the new hardware and install a generic driver automatically (No setup or
driver disk required). The V90-DAC is then ready to play V90-DAC, CD
or any other form of music file recognised by the
computer.
Outputs
Outputs
Outputs
Outputs Outputs
Make sure following the amplifier is turned off. Connect the V90-DAC
left and right outputs
to the line level inputs of the amplifier system.
Power
Power
Power
Power Power
Plug the DC connector lead from the power supply unit into the V90-
DACs power inlet socket, and plug the adaptor itself into a convenient
wall mains outlet. The blue LED will light to confirm the unit is ready for
use, and the green LED should also be lit indicating presence of digital
signal.
Use
Use
Use
UseUse Turn the volume on amplifier to normal listening levels, set the
input selector switch to desired input, sit back and enjoy the music!
Additional
Additional
Additional
AdditionalAdditional USB informati
USB informati
USB informati
USB informati USB information
on
on
onon
On the host computer, a new mixer will be available, which is the default
mixer whenever the DAC is plugged in. Use this mixer to select the
source or adjust levels if required. CD, MP3, WAV files played on any
software should now play through the DAC. This device has been
designed to work with Windows 98, ME, 2000, XP, Vista, 7 and 8, Linux
and Apple OS
The computer drivers for the USB input of the V90-DAC should install
automatically. To check correct installation follow these steps:
PC users
PC users
PC users
PC users PC users
Check the computer has picked up the device and is currently using it
by clicking: (most Windows versions)
- Start
- Settings
- Control panel
- Sounds and Multimedia
- Audio
Check “V90-DAC 24/96” appears under PREFERRED AUDIO DEVICE
tab.
Mac users
Mac users
Mac users
Mac usersMac users
Check the computer has picked up the device and is currently using it
by clicking: (MAC OS X)
- System preferences
- Hardware
- Sound
Check that “V90-DAC 24/96” is selected under the OUTPUT tab.
If the computer’s warning sounds/chimes are to played through the
DAC, make sure it is selected under the SOUND EFFECTS tab too.
This device is a high speed serial data processor, and by its nature,
requires a very high volume of USB bandwidth. It will benefit greatly
from being the only device connected on its USB ‘port’. Sharing the
same port with other devices may cause unwanted artefacts such as
dropouts or temporary loss of signal. This especially includes the use of
the DAC on a USB hub/splitter alongside other USB components.


Produkt Specifikationer

Mærke: Musical Fidelity
Kategori: Receiver
Model: V90-DAC

Har du brug for hjælp?

Hvis du har brug for hjælp til Musical Fidelity V90-DAC stil et spørgsmål nedenfor, og andre brugere vil svare dig




Receiver Musical Fidelity Manualer

Receiver Manualer

Nyeste Receiver Manualer

Artsound

Artsound PRL-1202 Manual

4 Oktober 2024
Roland

Roland KC-80 Manual

4 Oktober 2024
Onkyo

Onkyo TX-910 Manual

3 Oktober 2024
Cayin

Cayin M-11LS Manual

3 Oktober 2024
Cayin

Cayin M-845D Manual

3 Oktober 2024
Axton

Axton A894DSP Manual

2 Oktober 2024
Yamaha

Yamaha RX-D 485 Manual

2 Oktober 2024