Mvision S3 Manual
Læs nedenfor 📖 manual på dansk for Mvision S3 (39 sider) i kategorien Digitale decoders tuners. Denne guide var nyttig for 14 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/39
SAFETY PRECAUTION
CAUTION:
The lightning flash with
arrowhead symbol, within
an equilateral triangle, is
intended to alert the user
to "dangerous voltage"
and to prevent from a risk
of electric shock.
Warning:
To reduce the risk of
electric shock, don't open
the cabinet. Refer
servicing to qualified
personnel only.
The exclamation point
within an equilateral
triangle is intended to
alert the user to important
operating and
maintenance (servicing).
WARNING: Do not use this STB where contact with or immersion in water is a
possibility. Do not use near flower vase, washbowls, kitchen sinks, laundry tubs,
swimming pools, etc.
WARNING:
Do not put the candle or lamp stand on the cabinet; otherwise, there
is the danger of fire.
WARNING: The unit should be connected to a power supply only of the type
described in the operating instructions or as marked on the unit. If you are not
sure of the type of power supply (for example, 120 or 230 V) to your home,
consult your local dealer or local power company.
WARNING: This product install diodes. Do not open the cabinet or touch any
parts in the inner mechanism. Consult your local dealer for technical service if
the opening is required.
Note: To ensure proper use of this product, please read this User manual
carefully and retain for further reference.
Note: This product install diodes. Do not open the cabinet to avoid the unit
direct exposure to radiation.
Unit Cleaning: After the unit power is turned off, you can clean the cabinet,
panel and remo
te control with a soft cloth lightly moistened with a mild detergent
solution.
Produkt Specifikationer
| Mærke: | Mvision |
| Kategori: | Digitale decoders tuners |
| Model: | S3 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Mvision S3 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Digitale decoders tuners Mvision Manualer
9 Juli 2024
9 Juli 2024
Digitale decoders tuners Manualer
- Digitale decoders tuners Siemens
- Digitale decoders tuners Samsung
- Digitale decoders tuners Pioneer
- Digitale decoders tuners Grundig
- Digitale decoders tuners Motorola
- Digitale decoders tuners Nokia
- Digitale decoders tuners Strong
- Digitale decoders tuners Telestar
- Digitale decoders tuners Hikvision
- Digitale decoders tuners UPC
- Digitale decoders tuners Arion
- Digitale decoders tuners Anysee
- Digitale decoders tuners Telenet
- Digitale decoders tuners Humax
- Digitale decoders tuners Homecast
- Digitale decoders tuners Indi
- Digitale decoders tuners Tele 2
- Digitale decoders tuners Inverto
Nyeste Digitale decoders tuners Manualer
10 August 2024
8 August 2024
8 August 2024
8 August 2024
8 August 2024
7 August 2024
4 August 2024
3 August 2024
3 August 2024
2 August 2024