NEC VT490 Manual

NEC Beamer VT490

Læs nedenfor 📖 manual på dansk for NEC VT490 (6 sider) i kategorien Beamer. Denne guide var nyttig for 7 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/6
NEC Corporation of America
Visual Systems Division
VT490/590/595 Installation Guide
Ceiling Mounted and Desktop Rev 1.1
www.necvisualsystems.com VT490/590/595 Page 1 of 6
Contents
Product Description, Lens Specs, Notes and Formulas Pg 1
Diagrams & Distance Charts Pg 2
Cabinet Dimensions Pg 3-4
Ceiling Mount Dimensions Pg 5
Input Panel and Control Codes Pg 6
Product Description
Type: 3 panel LCD projector, Brightness: VT490: 2000 ANSI Lumens
0.6p-Si TFT w/MLA VT590/VT595: 2000 ANSI Lumens
Resolution: VT490: 800 x 600
VT590/VT595: 1024x768
Dimensions: 12.1”(W) x 10.2”(H) x 4.4”(D)
Weight: 6.17 lbs
Lens Specifications
Throw Ratio: 1.5 – 1.8:1 (for 100” diagonal) Focal Length: 18.9mm – 22.7mm
Offset Angle: 8.3° - 10.0° (for 100” diagonal) F/#: 1.7 - 2.07
Screen Sizes: 25” - 300” diagonal (4:3) Manual Focus/Manual Zoom
Notes
For screen sizes not indicated on the projection tables, use the formulas below.
If the figures on the tables do not match the results of formulas, use the figures in the table.
All calculations are based on 4:3 aspect ratio.
Distances are in inches, for millimeters multiply by 25.4.
• ± Distances may vary 5%.
Formulas
The Projection Formulas use the image width for calculation. For proper projection placement, determine the image width
for the desired screen size. Use the Screen Formulas below to calculate all screen dimensions. Plug in the width for “W” in
the Projection Formulas.
Refer to the diagrams and charts for popular screen sizes on page 2:
Definitions: 4:3 Screen Formulas:
W = Image Width W = H x 4/3
H = Image Height (size) H = W x 3/4
B = Vertical distance between lens center and screen center Screen Diagonal = W x 5/4
C = Throw distance
D = Vertical distance between lens center and screen top
(screen bottom for desktop application)
Projection Formulas:
B = 0.266W
C (wide) = 1.525W – 1.176
C (tele) = 1.828W – 1.173
D = 0.108W
α (wide) = tan¯¹ (B/C(wide))
α (tele) = tan¯¹ (B/C(tele))


Produkt Specifikationer

Mærke: NEC
Kategori: Beamer
Model: VT490

Har du brug for hjælp?

Hvis du har brug for hjælp til NEC VT490 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Beamer NEC Manualer

NEC

NEC NP-M363X Manual

10 Oktober 2024
NEC

NEC UM361X Manual

4 Oktober 2024
NEC

NEC PX1005QL Manual

21 September 2024
NEC

NEC NP-P350X Manual

14 September 2024
NEC

NEC VT460 Manual

14 September 2024
NEC

NEC NP-UM351W Manual

1 September 2024
NEC

NEC NP-PA1705UL Manual

26 August 2024
NEC

NEC MT860 Manual

24 August 2024
NEC

NEC M271X Manual

19 August 2024
NEC

NEC PV710UL-W Manual

18 August 2024

Beamer Manualer

Nyeste Beamer Manualer

Acer

Acer X137WH Manual

14 Oktober 2024
Barco

Barco Thor Manual

14 Oktober 2024
Epson

Epson EX3220 Manual

12 Oktober 2024
Barco

Barco F70-W6 Manual

10 Oktober 2024
Epson

Epson EH-LS500W Manual

9 Oktober 2024
Salora

Salora 43BHD1800 Manual

7 Oktober 2024